Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. R. Bieler et al., “Effect of Heating Rate on Recrystallization in Rolled Multicrystals of Pure Niobium”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 396. doi:10.18429/JACoW-SRF2021-TUPFDV001
[n] T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773.
[n] J. W. Lewellen et al., “Technology Maturation for the MaRIE 1.0 X-FEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 181-184. doi:10.18429/JACoW-FEL2015-MOP062
[n] E. Mulyani, J. W. Flanagan, H. Fukuma, H. Ikeda, and M. Tobiyama, “Image Reconstruction Technique Based on Coded Aperture Imaging for SuperKEKB X-ray Beam Size Monitor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4819-4822. doi:10.18429/JACoW-IPAC2018-THPML074
[n] J. W. Lewellen and F. L. Krawczyk, “Simulation of Alpha Magnet Elements in Dipole-only Tracking Codes”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP023, pp. 735-738.
[n] K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 294-296. doi:10.18429/JACoW-Cyclotrons2016-THB03
[n] K. Masuda et al., “Beam Property Measurements on the KU-FEL Linac”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS23, pp. XX-XX.
[n] T. Katoh, A. Akiyama, K. Kudo, and S. Takeda, “Communication System for the TRISTAN Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 679-683.
[n] R. Huang et al., “Preliminary design on the accelerator of an infrared free electron laser oscillator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1961-1963. doi:10.18429/JACoW-IPAC2023-TUPL101
[n] J. D. Fox and H. D. Schwarz, “Phase and Amplitude Detection System for the Stanford Linear Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2264-2267.
[n] H. Saugnac et al., “The MYRRHA Spoke Cryomodule Design”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP082, pp. 613-615.
[n] W. Corbett et al., “Status of Digital Orbit Feedback for SPEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP094L, pp. 1931-1936.
[n] E. Im, J. Kwon, M. Park, S. Lee, and Y. Ahn, “Development of Monitoring and Analysis System for Beam Operation in RAON”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO16, unpublished.
[n] D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 432-434. doi:10.18429/JACoW-IPAC2018-MOPML017
[n] M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
[n] A. Noda, K. Chida, Y. Hattori, A. Mizobuchi, F. Soga, and M. Yoshizawa, “Slow Beam Extraction System of TARN II”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1263-1266.
[n] C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-MEDSI2016-MOPE18
[n] A. Salom, B. Bravo, J. Marcos, and F. Perez, “ALBA LLRF Upgrades to Improve Beam Availability”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1022-1024. doi:10.18429/JACoW-IPAC2015-MOPTY042
[n] R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713.
[n] J. R. J. Bennett and R. J. Elsey, “Glass Jointed Alumina Vacuum Chambers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3336-3339.
[n] N. Akasaka, T. Kageyama, K. Kanazawa, K. Sato, Y. Suetsugu, and Y. Takeuchi, “Development of the Movable Mask System for KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A17, pp. 2301-2303.
[n] A. Drago et al., “100 Bunch DANE Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA008, pp. 366-368.
[n] M. V. Petrichenkov et al., “Separators for SLAC B-Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH009, pp. 3236-3238.
[n] J. Tanabe, J. Staples, and R. Yourd, “Design of the ESCAR Injection Beam Line”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1605-1609.
[n] J. H. Wei et al., “The New Beam Current Transformer for IR-FEL Facility at NSRL ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 312-315. doi:10.18429/JACoW-IPAC2017-MOPAB083
[n] S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
[n] J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
[n] H. Suk et al., “Dynamics of a Driver Beam Propagating in an Underdense Plasma with a Downward Density Transition”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH145, pp. 4011-4013.
[n] P. A. McIntosh et al., “Assembly Preparations for the International ERL Cryomodule at Daresbury Laboratory”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO098, pp. 864-868.
[n] A. Noda, K. Chida, A. Mizobuchi, F. Soga, and M. Yoshizawa, “DC Septum Magnet for Beam Extraction”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 363-366.
[n] K. Hosono, M. Kibayashi, I. Miura, and J. Abe, “Magnetic System of the RCNP Ring-Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-04, pp. 474-477.
[n] R. Cassel, “A Low Ripple Pulsed Phased Back Power Supply”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 500-503.
[n] M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 261-264. doi:10.18429/JACoW-IBIC2018-TUPB03
[n] P. Mueller et al., “RF Simulations of the Injector Section from CH8 to CH15 for MYRRHA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2790-2792. doi:10.18429/JACoW-IPAC2018-WEPML043
[n] E. Medvedko et al., “High Resolution Analog / Digital Power Supply Controller”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE012, pp. 761-763.
[n] J. M. Nogiec and K. Trombly-Freytag, “Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 461-464. doi:10.18429/JACoW-ICALEPCS2017-TUPHA036
[n] F. Perez, B. Bravo, A. Salom, and P. Sanchez, “Commissioning of the ALBA Storage Ring RF System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC045, pp. 178-180.
[n] P. A. Corlett and J. H. P. Rogers, “ERLP Quantum Efficiency Scanner”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH165, pp. 3179-3181.
[n] M. Takao et al., “Progress toward Brightness Improvements at the SPring-8 Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOA202, pp. XX-XX.
[n] K. Ohmi et al., “Electron Cloud Instability in SuperKEKB Phase I Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3104-3106. doi:10.18429/JACoW-IPAC2017-WEPIK075
[n] T. Toyama et al., “Beam Position Monitor for the J-PARC Main Ring Synchrotron”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW013, pp. XX-XX.
[n] Q. Z. Xing et al., “Present Status of the 3 MeV Proton Linac at Tsinghua University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP137, pp. 1182-1184.
For LaTeX
Use Complete Form
For BibTeX
References
- T. R. Bieler et al., “Effect of Heating Rate on Recrystallization in Rolled Multicrystals of Pure Niobium”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 396.
- T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773.
- J. W. Lewellen et al., “Technology Maturation for the MaRIE 1.0 X-FEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 181-184.
- E. Mulyani, J. W. Flanagan, H. Fukuma, H. Ikeda, and M. Tobiyama, “Image Reconstruction Technique Based on Coded Aperture Imaging for SuperKEKB X-ray Beam Size Monitor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4819-4822.
- J. W. Lewellen and F. L. Krawczyk, “Simulation of Alpha Magnet Elements in Dipole-only Tracking Codes”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP023, pp. 735-738.
- K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 294-296.
- K. Masuda et al., “Beam Property Measurements on the KU-FEL Linac”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS23, pp. XX-XX.
- T. Katoh, A. Akiyama, K. Kudo, and S. Takeda, “Communication System for the TRISTAN Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 679-683.
- R. Huang et al., “Preliminary design on the accelerator of an infrared free electron laser oscillator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL101, pp. 1961-1963.
- J. D. Fox and H. D. Schwarz, “Phase and Amplitude Detection System for the Stanford Linear Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2264-2267.
- H. Saugnac et al., “The MYRRHA Spoke Cryomodule Design”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP082, pp. 613-615.
- W. Corbett et al., “Status of Digital Orbit Feedback for SPEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP094L, pp. 1931-1936.
- E. Im, J. Kwon, M. Park, S. Lee, and Y. Ahn, “Development of Monitoring and Analysis System for Beam Operation in RAON”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper MOPCO16, unpublished.
- D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 432-434.
- M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
- A. Noda, K. Chida, Y. Hattori, A. Mizobuchi, F. Soga, and M. Yoshizawa, “Slow Beam Extraction System of TARN II”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1263-1266.
- C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 41-43.
- A. Salom, B. Bravo, J. Marcos, and F. Perez, “ALBA LLRF Upgrades to Improve Beam Availability”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1022-1024.
- R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713.
- J. R. J. Bennett and R. J. Elsey, “Glass Jointed Alumina Vacuum Chambers”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3336-3339.
- N. Akasaka, T. Kageyama, K. Kanazawa, K. Sato, Y. Suetsugu, and Y. Takeuchi, “Development of the Movable Mask System for KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A17, pp. 2301-2303.
- A. Drago et al., “100 Bunch DANE Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAA008, pp. 366-368.
- M. V. Petrichenkov et al., “Separators for SLAC B-Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH009, pp. 3236-3238.
- J. Tanabe, J. Staples, and R. Yourd, “Design of the ESCAR Injection Beam Line”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1605-1609.
- J. H. Wei et al., “The New Beam Current Transformer for IR-FEL Facility at NSRL ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 312-315.
- S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
- J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
- H. Suk et al., “Dynamics of a Driver Beam Propagating in an Underdense Plasma with a Downward Density Transition”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH145, pp. 4011-4013.
- P. A. McIntosh et al., “Assembly Preparations for the International ERL Cryomodule at Daresbury Laboratory”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO098, pp. 864-868.
- A. Noda, K. Chida, A. Mizobuchi, F. Soga, and M. Yoshizawa, “DC Septum Magnet for Beam Extraction”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 363-366.
- K. Hosono, M. Kibayashi, I. Miura, and J. Abe, “Magnetic System of the RCNP Ring-Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-04, pp. 474-477.
- R. Cassel, “A Low Ripple Pulsed Phased Back Power Supply”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 500-503.
- M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 261-264.
- P. Mueller et al., “RF Simulations of the Injector Section from CH8 to CH15 for MYRRHA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2790-2792.
- E. Medvedko et al., “High Resolution Analog / Digital Power Supply Controller”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE012, pp. 761-763.
- J. M. Nogiec and K. Trombly-Freytag, “Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 461-464.
- F. Perez, B. Bravo, A. Salom, and P. Sanchez, “Commissioning of the ALBA Storage Ring RF System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC045, pp. 178-180.
- P. A. Corlett and J. H. P. Rogers, “ERLP Quantum Efficiency Scanner”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH165, pp. 3179-3181.
- M. Takao et al., “Progress toward Brightness Improvements at the SPring-8 Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOA202, pp. XX-XX.
- K. Ohmi et al., “Electron Cloud Instability in SuperKEKB Phase I Commissioning”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3104-3106.
- T. Toyama et al., “Beam Position Monitor for the J-PARC Main Ring Synchrotron”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW013, pp. XX-XX.
- Q. Z. Xing et al., “Present Status of the 3 MeV Proton Linac at Tsinghua University”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP137, pp. 1182-1184.
Back to search