Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. C. Liang, C. S. Chou, K. T. Hsu, W. K. Lau, A. P. Lee, and S. H. Lee, “Time Jitter Measurement for the NSRRC Photo-Injector Drive Laser”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP094, pp. 4177-4179.
[n] G. Feng et al., “Beam Lifetime Studies of Hefei Advanced Light Source (HALS) Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC014, pp. 2016-2018.
[n] N. Blaskovic Kraljevic, D. Arominski, and D. Schulte, “Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 458-460. doi:10.18429/JACoW-IPAC2019-MOPMP016
[n] N. Simos, K. Brown, H. G. Kirk, R. Prigl, and K. T. McDonald, “Thermal Shock Analysis of Windows Interacting with Energetic, Focused Beam of the BNL Muon Target Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH085, pp. 1408-1410.
[n] H. J. Zheng, J. Gao, and Y. Wang, “CEPC Bunch Lengthening and Cavity HOM Analysis”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3805-3807. doi:10.18429/JACoW-IPAC2016-THPOR015
[n] Y. Arakaki et al., “Design of Small-Beam Loss Slow Extraction in a High Intensity 50-GeV Proton Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B17, pp. 2267-2269.
[n] P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254.
[n] D. L. Judd, “General Discussion C”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A19, pp. 81-83.
[n] G. Fernandez Penacoba et al., “Outcome of the Commissioning of the Readout and Actuation Channels for the Cryogenics of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD040, pp. 2500-2502.
[n] P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
[n] R. S. Bender, “Beam Facilities Planned for the ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F05, pp. 270-271.
[n] B. Bradu and P. Gayet, “PROCOS: a Real Time Process Simulator Coupled to the Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP067, pp. 794-796.
[n] J. B. Fitzgerald and G. Mrotzek, “Performance and Progress of the Daresbury Photon Beam Tungsten Vane Monitor System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP020L, pp. 1851-1853.
[n] N. Wilson, G. Bolme, and K. Kalash, “Design and Construction of a 425-MHz Cryogenic (20 K) Two-Cell DTL Sparker”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-31, pp. 115-118.
[n] E. Blanco, F. B. Bernard, P. Gayet, and H. Milcent, “UNICOS: An Open Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD003, pp. 910-912.
[n] J. Prieto, M. A. Fraser, B. Goddard, V. Kain, L. S. Stoel, and F. M. Velotti, “Beam Dynamics Simulations of the Effect of Power Converter Ripple on Slow Extraction at the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 818-821. doi:10.18429/JACoW-IPAC2018-TUPAF050
[n] R. T. Elliott, M. R. Harold, and J. A. Lidbury, “Synchrotron Magnets for the SNS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3922-3925.
[n] P. Gladkikh et al., “The Progress in Physical Start-Up of the NSC KIPT Subcritical Neutron Source Facility Driven by an Electron Linear Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2197-2199. doi:10.18429/JACoW-IPAC2019-TUPTS115
[n] E. S. Kim, “Simulation of The Muon Cooling Channel in Linear RF Systems”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU486, pp. 518-520.
[n] J. B. Fitzgerald, B. G. Martlew, and P. D. Quinn, “Operational Performance of the Local Vertical Servo System on the Daresbury SRS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP021L, pp. 1854-1856.
[n] M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO101, pp. XX-XX.
[n] A. A. Shcherbakov et al., “The Kharkov X-ray Generator Facility NESTOR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA060, pp. 2253-2255.
[n] A. Y. Zelinsky, P. Gladkikh, and A. A. Kalamayko, “Injection Efficiency Simulation in the Electron Storage Ring of X-Ray Generator NESTOR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 784-787. doi:10.18429/JACoW-IPAC2017-MOPIK107
For LaTeX
Use Complete Form
For BibTeX
References
- C. C. Liang, C. S. Chou, K. T. Hsu, W. K. Lau, A. P. Lee, and S. H. Lee, “Time Jitter Measurement for the NSRRC Photo-Injector Drive Laser”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP094, pp. 4177-4179.
- G. Feng et al., “Beam Lifetime Studies of Hefei Advanced Light Source (HALS) Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC014, pp. 2016-2018.
- N. Blaskovic Kraljevic, D. Arominski, and D. Schulte, “Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 458-460.
- N. Simos, K. Brown, H. G. Kirk, R. Prigl, and K. T. McDonald, “Thermal Shock Analysis of Windows Interacting with Energetic, Focused Beam of the BNL Muon Target Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH085, pp. 1408-1410.
- H. J. Zheng, J. Gao, and Y. Wang, “CEPC Bunch Lengthening and Cavity HOM Analysis”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3805-3807.
- Y. Arakaki et al., “Design of Small-Beam Loss Slow Extraction in a High Intensity 50-GeV Proton Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B17, pp. 2267-2269.
- P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254.
- D. L. Judd, “General Discussion C”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A19, pp. 81-83.
- G. Fernandez Penacoba et al., “Outcome of the Commissioning of the Readout and Actuation Channels for the Cryogenics of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD040, pp. 2500-2502.
- P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
- R. S. Bender, “Beam Facilities Planned for the ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F05, pp. 270-271.
- B. Bradu and P. Gayet, “PROCOS: a Real Time Process Simulator Coupled to the Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP067, pp. 794-796.
- J. B. Fitzgerald and G. Mrotzek, “Performance and Progress of the Daresbury Photon Beam Tungsten Vane Monitor System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP020L, pp. 1851-1853.
- N. Wilson, G. Bolme, and K. Kalash, “Design and Construction of a 425-MHz Cryogenic (20 K) Two-Cell DTL Sparker”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-31, pp. 115-118.
- E. Blanco, F. B. Bernard, P. Gayet, and H. Milcent, “UNICOS: An Open Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THD003, pp. 910-912.
- J. Prieto, M. A. Fraser, B. Goddard, V. Kain, L. S. Stoel, and F. M. Velotti, “Beam Dynamics Simulations of the Effect of Power Converter Ripple on Slow Extraction at the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 818-821.
- R. T. Elliott, M. R. Harold, and J. A. Lidbury, “Synchrotron Magnets for the SNS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3922-3925.
- P. Gladkikh et al., “The Progress in Physical Start-Up of the NSC KIPT Subcritical Neutron Source Facility Driven by an Electron Linear Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2197-2199.
- E. S. Kim, “Simulation of The Muon Cooling Channel in Linear RF Systems”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU486, pp. 518-520.
- J. B. Fitzgerald, B. G. Martlew, and P. D. Quinn, “Operational Performance of the Local Vertical Servo System on the Daresbury SRS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP021L, pp. 1854-1856.
- M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO101, pp. XX-XX.
- A. A. Shcherbakov et al., “The Kharkov X-ray Generator Facility NESTOR”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA060, pp. 2253-2255.
- A. Y. Zelinsky, P. Gladkikh, and A. A. Kalamayko, “Injection Efficiency Simulation in the Electron Storage Ring of X-Ray Generator NESTOR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 784-787.
Back to search