Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Honda et al., “Reconstruction of Photon Factory Storage Ring for the Straight-Sections Upgrade Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE041, pp. 2678-2680.
[n] R. Parodi, A. Dacc?á, G. Gemme, R. Musenich, S. Pittaluga, and V. Buscaglia, “RF Superconductivity in Genoa”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A23, pp. 218-223.
[n] K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
[n] Ph. Piot, T. Limberg, and F. Stulle, “Numerical Investigations of Coherent Synchrotron Radiation Driven Instability in Magnetic Bunch Compressors”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI030, pp. 1544-1546.
[n] S. S. Kurennoy, Y. K. Batygin, E. R. Olivas, and L. Rybarcyk, “Realistic Modeling of 4-Rod RFQs with CST Studio”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3119-3121. doi:10.18429/JACoW-IPAC2014-THPRO098
[n] S. S. Kurennoy, “Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD017, pp. 1446-1448.
[n] T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
[n] T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 251-253. doi:10.18429/JACoW-LINAC2016-MOPLR052
[n] E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
[n] H. Sakai et al., “Improvement of the Position Monitor using White Light Interferometer for Measuring Precise Movement of Compact ERL Superconducting Cavities in Cryomodule”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1787-1789. doi:10.18429/JACoW-IPAC2014-TUPRI092
[n] D. Peterson et al., “Measurement and Performance of the Fermilab Antiproton Source Debuncher Betatron Stochastic Cooling System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1728-1731.
[n] J. Tamura et al., “Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP090, pp. 264-266.
[n] R. W. Garnett et al., “LANSCE H+ RFQ Status”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4073-4075. doi:10.18429/JACoW-IPAC2015-THPF148
[n] N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2190-2192. doi:10.18429/JACoW-IPAC2018-WEPAL018
[n] K. Hirosawa, T. Okada, N. Kuroo, K. Ohmi, N. Ohuchi, and D. Zhou, “The Influence of Higher Order Multipoles of IR Magnets on Luminosity for SuperKEKB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3463-3465. doi:10.18429/JACoW-IPAC2018-THPAK099
[n] K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
[n] J. Marriner, G. Jackson, D. McGinnis, R. Pasquinelli, D. Peterson, and J. Petter, “Bunched Beam Cooling in the FNAL Antiproton Accumulator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1577-1580.
[n] W. Kells, J. Marriner, S. Mtingwa, and R. Pasquinelli, “Performance of Tevatron I Core Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1090-1093.
[n] K. Tsuchiya and T. Aoto, “Magnetic Field Adjustment of a Polarizing Undulator (U#16-2) at the Photon Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD028, pp. 3153-3155.
[n] T. Honda et al., “Results of the Straight-sections Upgrade of the Photon Factory Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS036, pp. 3365-3367.
[n] R. J. Yang, P. Bambade, K. Kubo, T. Okugi, N. Terunuma, and D. Zhou, “Numerical Investigation of Beam Halo From Beam Gas Scattering in KEK-ATF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4410-4413. doi:10.18429/JACoW-IPAC2017-THPVA002
[n] G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 738-741.
[n] C. Pagani et al., “A 100-1600 MeV High Current SC Proton Linac for Waste Transmutation and Energy Amplification”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A06, pp. 36-43.
[n] Ph. Bernard, G. Gemme, R. Parodi, and E. Picasso, “Coupled Superconducting Cavities for the Detection of Weak Forces”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B16, pp. 413-421.
[n] Y. Kobayashi et al., “PF-Ring and PF-AR Operational Status”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN045, pp. 1019-1021.
[n] V. Guidi et al., “Crystal Undulator as a Novel Compact Source of Radiation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB045, pp. 917-919.
[n] N. Ogiwara et al., “A Non-destructive Profile Monitor Using a Gas Sheet”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2102-2104. doi:10.18429/JACoW-IPAC2016-WEOBB03
[n] N. Kanaya, S. Asaoka, and H. Maezawa, “Mission Critical Operation Archiving System Using a Database For Synchrotron Radiation Beam Lines at the Photon Factory”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D049, pp. 513-515.
[n] R. J. Yang et al., “Experimental Study of Halo Formation at ATF2”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 142-145. doi:10.18429/JACoW-IPAC2017-MOPAB029
[n] C. W. Schmidt, L. J. Allen, E. S. McCrory, T. L. Owens, and M. B. Popovic, “Phase Scan Signature Matching for Linac Tuning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1691-1694.
[n] J. Tamura, H. Ao, H. Asano, T. Morishita, N. Ouchi, and Y. Sawabe, “Recovery Efforts from the Tohoku Earthquake and Energy Upgrade Preparation of the Beam Transport from the J-PARC Linac to the 3-GeV Synchrotron”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB021, pp. 891-893.
[n] Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
[n] E. Kako et al., “Pulsed Operation of the 972 MHz Prototype Cryomodule for ADS Superconducting Linac”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP39, pp. 551-553.
[n] H. Ao, H. Asano, N. Ouchi, J. Tamura, F. Naito, and K. Takata, “Annular-ring Coupled Structure for the Energy Upgrade of the J-PARC Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB020, pp. 888-890.
[n] S. S. Kurennoy, “Electromagnetic Modeling of RF Drive in the LANSCE DTL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI079, pp. 2878-2880.
[n] S. Schreiber, K. Flöttmann, Ph. Piot, D. Sertore, L. Catani, and A. Cianchi, “Emittance Measurements at the TTF Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB009, pp. 86-88.
[n] K. A. Brown et al., “Performance and Capabilities of the NASA Space Radiation Laboratory at BNL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH099, pp. 270-272.
[n] I. R. Gulamov, M. N. Abdukajumov, and B. S. Yuldashev, “The Faciltities and the Isotope Production in the Institute of Nuclear Physics in Tashkent”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-17, pp. 588-589.
[n] S. Asaoka et al., “STATUS REPORT ON THE KEK PHOTON FACTORY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUCM02, pp. XX-XX.
[n] H. Sakai et al., “Precise Measurement of Superconducting Cavity Movement in Cryomodule by the Position Monitor Using White Light Interferometer”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP069, pp. 291-296.
[n] V. Guidi et al., “Highly Efficient Crystal Deflector for Channeling Extraction of a Proton Beam from Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB016, pp. 1655-1657.
[n] A. A. Rylov, I. R. Gulamov, A. P. Portyanko, and B. S. Yuldashev, “A Fast Method for Producing Super-Pure Radionuclide 57Co at the Classical 1.5 meter Cyclotron of the Institute of Nuclear Physics Ac.Sc.RUz”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-07, pp. 556-558.
[n] Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
[n] Ph. Piot and K. Fl?Âttmann, “An Upgraded Injector for the TTF FEL-user Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI051, pp. 1798-1800.
[n] N. Fuster-Martinez et al., “Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 139-142. doi:10.18429/JACoW-IBIC2016-MOPG40
[n] A. A. Rylov, V. N. Bubir, and I. R. Gulamov, “Ion Source Revolved on 8o Angle Relatively Dee Edge for Classic Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-12, pp. 493-494.
[n] N. Gerasimova, H. Sinn, S. Dziarzhytski, and R. Treusch, “The Photon Beam Loss Monitors as a Part of Equipment Protection System at European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP010, pp. 37-40.
[n] J. J. Welch et al., “Undulator K-Parameter Measurements at LCLS”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper THOA05, pp. 730-733.
[n] A. Jansson, P. Lebrun, and R. Pasquinelli, “Experience with the 1.7 GHz Schottky Pick-ups in the Tevatron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT135, pp. 2777-2779.
[n] M. Yoshida, H. Asano, S. Fukuda, M. Kubosaki, and Y. Moriguchi, “The Development of L-band Inductive Output Tube without Trolly toward Higher Applied Voltage.”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB047, pp. 3984-3986.
[n] F. Stephan et al., “First Measurements at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI063, pp. 1813-1815.
[n] E. Kako et al., “High Power Test of the Prototype Cryomodule for ADS Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT062, pp. 3579-3581.
[n] X. Deng, “Stochastic Cooling Enhanced Steady-State Microbunching”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 64-69. doi:10.18429/JACoW-COOL2025-WEB1
[n] Yu. G. Alenitsky et al., “ISOCHRONOUS CYCLOTRON C250 FOR PROTON THERAPY APPLICATION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH10, pp. XX-XX.
[n] V. I. Baranov, V. M. Biryukov, Yu. A. Chesnokov, V. I. Kotov, M. V. Tarakanov, and S. V. Tsarik, “Observation of the Influence of the Crystal Surface Defects on the Characteristics of the High Energy Particle Beam Deflected With a Bent Monocrystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR21, pp. 1949-1951.
[n] V. N. Zapolsky et al., “IHEP Polarized Proton Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 454-457.
[n] K. Shafak et al., “Passively stable pulsed optical timing distribution at 1030-nm wavelength using hollow core optical fibers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2903-2905. doi:10.18429/JACoW-IPAC2024-WEPS83
[n] J. Kamiya et al., “Improvements of Vacuum System in J-PARC 3 GeV Synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3408-3411. doi:10.18429/JACoW-IPAC2017-WEPVA062
[n] E. Wang et al., “Electron Ion Collider Strong Hadron Cooling Design Summary”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 16-21. doi:10.18429/JACoW-COOL2025-TUA2
[n] T. Grunwitz et al., “Pulsed UV Laser System for Laser Cooling of Relativistic Bunched Ion Beams at the SIS100”, presented at the COOL'25, Stony Brook, NY, USA, Oct. 2025, paper TUC2, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Honda et al., “Reconstruction of Photon Factory Storage Ring for the Straight-Sections Upgrade Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE041, pp. 2678-2680.
- R. Parodi, A. Dacc?á, G. Gemme, R. Musenich, S. Pittaluga, and V. Buscaglia, “RF Superconductivity in Genoa”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A23, pp. 218-223.
- K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
- Ph. Piot, T. Limberg, and F. Stulle, “Numerical Investigations of Coherent Synchrotron Radiation Driven Instability in Magnetic Bunch Compressors”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI030, pp. 1544-1546.
- S. S. Kurennoy, Y. K. Batygin, E. R. Olivas, and L. Rybarcyk, “Realistic Modeling of 4-Rod RFQs with CST Studio”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3119-3121.
- S. S. Kurennoy, “Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD017, pp. 1446-1448.
- T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
- T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 251-253.
- E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
- H. Sakai et al., “Improvement of the Position Monitor using White Light Interferometer for Measuring Precise Movement of Compact ERL Superconducting Cavities in Cryomodule”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1787-1789.
- D. Peterson et al., “Measurement and Performance of the Fermilab Antiproton Source Debuncher Betatron Stochastic Cooling System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1728-1731.
- J. Tamura et al., “Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP090, pp. 264-266.
- R. W. Garnett et al., “LANSCE H+ RFQ Status”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4073-4075.
- N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2190-2192.
- K. Hirosawa, T. Okada, N. Kuroo, K. Ohmi, N. Ohuchi, and D. Zhou, “The Influence of Higher Order Multipoles of IR Magnets on Luminosity for SuperKEKB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3463-3465.
- K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
- J. Marriner, G. Jackson, D. McGinnis, R. Pasquinelli, D. Peterson, and J. Petter, “Bunched Beam Cooling in the FNAL Antiproton Accumulator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1577-1580.
- W. Kells, J. Marriner, S. Mtingwa, and R. Pasquinelli, “Performance of Tevatron I Core Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1090-1093.
- K. Tsuchiya and T. Aoto, “Magnetic Field Adjustment of a Polarizing Undulator (U#16-2) at the Photon Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD028, pp. 3153-3155.
- T. Honda et al., “Results of the Straight-sections Upgrade of the Photon Factory Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS036, pp. 3365-3367.
- R. J. Yang, P. Bambade, K. Kubo, T. Okugi, N. Terunuma, and D. Zhou, “Numerical Investigation of Beam Halo From Beam Gas Scattering in KEK-ATF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4410-4413.
- G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 738-741.
- C. Pagani et al., “A 100-1600 MeV High Current SC Proton Linac for Waste Transmutation and Energy Amplification”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A06, pp. 36-43.
- Ph. Bernard, G. Gemme, R. Parodi, and E. Picasso, “Coupled Superconducting Cavities for the Detection of Weak Forces”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B16, pp. 413-421.
- Y. Kobayashi et al., “PF-Ring and PF-AR Operational Status”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN045, pp. 1019-1021.
- V. Guidi et al., “Crystal Undulator as a Novel Compact Source of Radiation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB045, pp. 917-919.
- N. Ogiwara et al., “A Non-destructive Profile Monitor Using a Gas Sheet”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2102-2104.
- N. Kanaya, S. Asaoka, and H. Maezawa, “Mission Critical Operation Archiving System Using a Database For Synchrotron Radiation Beam Lines at the Photon Factory”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D049, pp. 513-515.
- R. J. Yang et al., “Experimental Study of Halo Formation at ATF2”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 142-145.
- C. W. Schmidt, L. J. Allen, E. S. McCrory, T. L. Owens, and M. B. Popovic, “Phase Scan Signature Matching for Linac Tuning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1691-1694.
- J. Tamura, H. Ao, H. Asano, T. Morishita, N. Ouchi, and Y. Sawabe, “Recovery Efforts from the Tohoku Earthquake and Energy Upgrade Preparation of the Beam Transport from the J-PARC Linac to the 3-GeV Synchrotron”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB021, pp. 891-893.
- Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
- E. Kako et al., “Pulsed Operation of the 972 MHz Prototype Cryomodule for ADS Superconducting Linac”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP39, pp. 551-553.
- H. Ao, H. Asano, N. Ouchi, J. Tamura, F. Naito, and K. Takata, “Annular-ring Coupled Structure for the Energy Upgrade of the J-PARC Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB020, pp. 888-890.
- S. S. Kurennoy, “Electromagnetic Modeling of RF Drive in the LANSCE DTL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI079, pp. 2878-2880.
- S. Schreiber, K. Flöttmann, Ph. Piot, D. Sertore, L. Catani, and A. Cianchi, “Emittance Measurements at the TTF Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPB009, pp. 86-88.
- K. A. Brown et al., “Performance and Capabilities of the NASA Space Radiation Laboratory at BNL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH099, pp. 270-272.
- I. R. Gulamov, M. N. Abdukajumov, and B. S. Yuldashev, “The Faciltities and the Isotope Production in the Institute of Nuclear Physics in Tashkent”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-17, pp. 588-589.
- S. Asaoka et al., “STATUS REPORT ON THE KEK PHOTON FACTORY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUCM02, pp. XX-XX.
- H. Sakai et al., “Precise Measurement of Superconducting Cavity Movement in Cryomodule by the Position Monitor Using White Light Interferometer”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP069, pp. 291-296.
- V. Guidi et al., “Highly Efficient Crystal Deflector for Channeling Extraction of a Proton Beam from Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB016, pp. 1655-1657.
- A. A. Rylov, I. R. Gulamov, A. P. Portyanko, and B. S. Yuldashev, “A Fast Method for Producing Super-Pure Radionuclide 57Co at the Classical 1.5 meter Cyclotron of the Institute of Nuclear Physics Ac.Sc.RUz”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-07, pp. 556-558.
- Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
- Ph. Piot and K. Fl?Âttmann, “An Upgraded Injector for the TTF FEL-user Facility”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI051, pp. 1798-1800.
- N. Fuster-Martinez et al., “Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 139-142.
- A. A. Rylov, V. N. Bubir, and I. R. Gulamov, “Ion Source Revolved on 8o Angle Relatively Dee Edge for Classic Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-12, pp. 493-494.
- N. Gerasimova, H. Sinn, S. Dziarzhytski, and R. Treusch, “The Photon Beam Loss Monitors as a Part of Equipment Protection System at European XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP010, pp. 37-40.
- J. J. Welch et al., “Undulator K-Parameter Measurements at LCLS”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper THOA05, pp. 730-733.
- A. Jansson, P. Lebrun, and R. Pasquinelli, “Experience with the 1.7 GHz Schottky Pick-ups in the Tevatron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT135, pp. 2777-2779.
- M. Yoshida, H. Asano, S. Fukuda, M. Kubosaki, and Y. Moriguchi, “The Development of L-band Inductive Output Tube without Trolly toward Higher Applied Voltage.”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB047, pp. 3984-3986.
- F. Stephan et al., “First Measurements at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI063, pp. 1813-1815.
- E. Kako et al., “High Power Test of the Prototype Cryomodule for ADS Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT062, pp. 3579-3581.
- X. Deng, “Stochastic Cooling Enhanced Steady-State Microbunching”, in Proc. 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper WEB1, pp. 64-69.
- Yu. G. Alenitsky et al., “ISOCHRONOUS CYCLOTRON C250 FOR PROTON THERAPY APPLICATION”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH10, pp. XX-XX.
- V. I. Baranov, V. M. Biryukov, Yu. A. Chesnokov, V. I. Kotov, M. V. Tarakanov, and S. V. Tsarik, “Observation of the Influence of the Crystal Surface Defects on the Characteristics of the High Energy Particle Beam Deflected With a Bent Monocrystal”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR21, pp. 1949-1951.
- V. N. Zapolsky et al., “IHEP Polarized Proton Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 454-457.
- K. Shafak et al., “Passively stable pulsed optical timing distribution at 1030-nm wavelength using hollow core optical fibers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS83, pp. 2903-2905.
- J. Kamiya et al., “Improvements of Vacuum System in J-PARC 3 GeV Synchrotron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3408-3411.
- E. Wang et al., “Electron Ion Collider Strong Hadron Cooling Design Summary”, in Proc. 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper TUA2, pp. 16-21.
- T. Grunwitz et al., “Pulsed UV Laser System for Laser Cooling of Relativistic Bunched Ion Beams at the SIS100”, presented at the 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper TUC2, unpublished.
Back to search