Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Chautard et al., “Status Report On Ganil-Spiral1”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 99-104.
[n] R. Wehrle and J. Moenich, “A Vacuum System for the Argonne 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3792-3795.
[n] J. Zichy, Ch. Markovits, and L. Rezzonico, “The Design, Assembly and Performance of the SIN Beam Transfer Line”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-21, pp. 306-311.
[n] Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-02, pp. 507-510.
[n] M. Olivo, W. Joho, and U. Schryber, “The Design of an 860 KeV Pre-Accelerator for the New SIN High Current Injector Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3980-3983.
[n] I. Akimov et al., “Application of HTS Bi-2223 for Current Leads of Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B14, pp. 2178-2180.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Examination of Cutouts Inner Surfaces from Nb3Sn Coated Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 189-192. doi:10.18429/JACoW-LINAC2016-MOPLR023
[n] R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1666-1669.
[n] U. Locans, A. Adelmann, L. Stingelin, and H. S. Xu, “A GPU Variant of Mbtrack and Its Application in SLS-2”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3827-3829. doi:10.18429/JACoW-IPAC2017-THPAB051
[n] H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 741-744.
[n] V. G. Kurakin and P. V. Kurakin, “Multy Frequency Stored Energy RF Linac”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB017, pp. 350-352.
[n] E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
[n] J. R. Richardson, “A Simplified Approach”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A03, pp. 7-11.
[n] I. Bogdanov et al., “AC Losses Measurements in HTS Coils”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 363-365. doi:10.18429/JACoW-RUPAC2018-WEPSB43
[n] M. Green, R. Gupta, R. B. Palmer, and R. Scanlan, “Nb3Sn Magnets for a MUON Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22F, pp. 1990-1992.
[n] A. K. Bandyopadhyay, K. Balewski, A. Joestingmeier, A. S. Omar, and R. Wanzenberg, “Computation of Wakefields and Impedances for the PETRA III Longitudinal Feedback Cavity”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA016, pp. 124-126.
[n] S. Ellis, “SNS SRF Time Dependent Cavity RF Resonance Shift due to Lorentz Force Induced Mechanical Excitation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH140, pp. 1107-1109.
[n] M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3957-3959. doi:10.18429/JACoW-IPAC2017-THPAB103
[n] T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 898-903.
[n] L. Tkachenko et al., “Muon Transport Channels with Longitudinal Magnetic Field”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH310, pp. 3627-3629.
[n] N. Pogue, A. Adelmann, and L. Stingelin, “Opal Simulations of the PSI Ring Cyclotron and a Design for a Higher Order Mode Flat Top Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3891-3894. doi:10.18429/JACoW-IPAC2017-THPAB077
[n] N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
[n] D. L. Judd, “Session I Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A01, pp. XX-XX.
[n] L. Tkachenko et al., “Development of Fast-Cycling Superconducting Quadrupole and Corrector Magnets for the SIS 300”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC02, pp. 300-302.
[n] C. Bungau, R. J. Barlow, and R. Cywinski, “Study on Neutronics Design of an Accelerator Driven Subcritical Reactor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA040, pp. 160-162.
[n] J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
[n] C. Iselin, J. P. Koutchouk, Y. Marti, and J. Poole, “Implementation of the LEP Optics Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1509-1512.
[n] A. Sarrió Martínez, F. Loprete, and C. Maglioni, “Upgrade Strategies for the Proton Synchrotron Booster Dump at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP016, pp. 3761-3763.
[n] C. Bungau, R. J. Barlow, R. Cywinski, and S. C. Tygier, “Accelerator Driven Systems for Energy Production and Waste Transmutation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP147, pp. 1854-1856.
[n] M. Fitterer, O. S. Brüning, H. Burkhardt, B. J. Holzer, J. M. Jowett, and M. Klein, “Update on LHeC Ring-Ring Optics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC037, pp. 1242-1244.
[n] N. Milleron and R. Wolgast, “Cryopumping the Omnitron Ultra-Vacuum System Using Heat-Pipes" and Metallic Conductors"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 941-945.
[n] T. Kii et al., “Design Study on THz Seeded FEL Using Photocathode RF Gun and Short Period Undulator”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU03, pp. 196-199.
[n] J. F. DeFord, B. L. Held, and K. J. Willis, “Improved Algorithms for Multipacting Simulation in the Analyst Code”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP159, pp. 1785-1787.
[n] M. Takao, J. Schimizu, Y. Shimosaki, and K. Soutome, “Dynamic Aperture Study at the SPring-8 Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE067, pp. 4671-4673.
[n] R. Olsen and H. Langenbach, “High Precision Power Supplies for the National Synchrotron Light Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1408-1410.
[n] G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356.
[n] S. Myers, R. Olsen, and I. Wilson, “Hardware for the LEP Transverse Feedback System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 751-754.
[n] S. C. Sun et al., “Mechanical Design of a Cryogenic Permanent Magnet Undulator at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1475-1477. doi:10.18429/JACoW-IPAC2017-TUPAB066
[n] S. Kazakov et al., “High Power Couplers for the Project X Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO006, pp. 361-363.
[n] Y. E. Tan and R. B. Hogan, “Australian Synchrotron BPM Electronics Upgrade”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 297-299. doi:10.18429/JACoW-IBIC2018-TUPC01
[n] P. Ninin, “IEC 61508 Experience for the Development of the LHC Functional Safety Systems and Future Perspectives”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC004, pp. 400-402.
[n] F. Bordry, “Status of the Large Hadron Collider (LHC)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOXAGM01, pp. 1-5.
[n] R. D?Âlling, “Measurement of the Time-Structure of the 72 MeV Proton Beam in the PSI Injector-2 Cyclotron”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS05, pp. XX-XX.
[n] R. B. Hogan, S. Chen, and A. Michalczyk, “Standardising of Application Specific Implementations at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2460-2461. doi:10.18429/JACoW-IPAC2019-WEPGW002
[n] V. G. Kurakin and P. V. Kurakin, “Superconducting Stored Energy RF Linac as Free Electron Laser Driver”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 238-240. doi:10.18429/JACoW-RUPAC2016-TUPSA012
[n] W. Joho, “High Intensity Problems in Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EI-03, pp. 337-347.
[n] B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
[n] J. Poole, “Requirements and Trends in the Control of Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 332-337.
[n] G. Karady, J. Kansog, and J. Schneider, “Resonant Power Supplies for a Large Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1480-1483.
[n] B. Kuiper, “Controls for the LEP Preinjector, The CERN PS Controls Group”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2044-2047.
[n] T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
[n] Y. Otake, “Construction Status of XFEL/SPring-8 (Its Stability Issue)”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUBAU06, pp. 222-226.
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] Z. Duan and Q. Qin, “Optimization of Chromatic Sextupoles in Electron Storage Rings Using Genetic Algorithms”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ011, pp. 3705-3707.
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Development and Industrial Fabrication of Superconducting Accelerator Modules”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1277-1280.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] F. Zimmermann and O. S. Brüning, “Parameter Space for the LHC Luminosity Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC005, pp. 127-129.
[n] F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
[n] G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1084-1087.
[n] Y. Sun et al., “Design of the JLC/NLC RDDS Structure Using Parallel Eigensolver Omega3P”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA04, pp. 380-382.
[n] N. M. King, “Spiral Ridge Studies at the University of Florida”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A06, pp. 18-23.
[n] R. Saban, “Integrating Industrial and Accelerator Control Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE01, pp. 2147-2151.
[n] J. F. DeFord, “Theoretical/Numerical Investigation of Induction Cavity Impedances for Moderate to Large Gap Widths”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU427, pp. 375-377.
[n] M. W. Poole et al., “4GLS - a New Type of Fourth Generation Light Source Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191.
[n] S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3544-3546. doi:10.18429/JACoW-IPAC2017-WEPVA116
[n] B. Yan, “Microbunching instability for beam swithyard transport”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS43, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Chautard et al., “Status Report On Ganil-Spiral1”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 99-104.
- R. Wehrle and J. Moenich, “A Vacuum System for the Argonne 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3792-3795.
- J. Zichy, Ch. Markovits, and L. Rezzonico, “The Design, Assembly and Performance of the SIN Beam Transfer Line”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-21, pp. 306-311.
- Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-02, pp. 507-510.
- M. Olivo, W. Joho, and U. Schryber, “The Design of an 860 KeV Pre-Accelerator for the New SIN High Current Injector Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3980-3983.
- I. Akimov et al., “Application of HTS Bi-2223 for Current Leads of Superconducting Magnets”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B14, pp. 2178-2180.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Examination of Cutouts Inner Surfaces from Nb3Sn Coated Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 189-192.
- R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1666-1669.
- U. Locans, A. Adelmann, L. Stingelin, and H. S. Xu, “A GPU Variant of Mbtrack and Its Application in SLS-2”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3827-3829.
- H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 741-744.
- V. G. Kurakin and P. V. Kurakin, “Multy Frequency Stored Energy RF Linac”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB017, pp. 350-352.
- E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
- J. R. Richardson, “A Simplified Approach”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A03, pp. 7-11.
- I. Bogdanov et al., “AC Losses Measurements in HTS Coils”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 363-365.
- M. Green, R. Gupta, R. B. Palmer, and R. Scanlan, “Nb3Sn Magnets for a MUON Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22F, pp. 1990-1992.
- A. K. Bandyopadhyay, K. Balewski, A. Joestingmeier, A. S. Omar, and R. Wanzenberg, “Computation of Wakefields and Impedances for the PETRA III Longitudinal Feedback Cavity”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA016, pp. 124-126.
- S. Ellis, “SNS SRF Time Dependent Cavity RF Resonance Shift due to Lorentz Force Induced Mechanical Excitation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH140, pp. 1107-1109.
- M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3957-3959.
- T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 898-903.
- L. Tkachenko et al., “Muon Transport Channels with Longitudinal Magnetic Field”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH310, pp. 3627-3629.
- N. Pogue, A. Adelmann, and L. Stingelin, “Opal Simulations of the PSI Ring Cyclotron and a Design for a Higher Order Mode Flat Top Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3891-3894.
- N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
- D. L. Judd, “Session I Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A01, pp. XX-XX.
- L. Tkachenko et al., “Development of Fast-Cycling Superconducting Quadrupole and Corrector Magnets for the SIS 300”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC02, pp. 300-302.
- C. Bungau, R. J. Barlow, and R. Cywinski, “Study on Neutronics Design of an Accelerator Driven Subcritical Reactor”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA040, pp. 160-162.
- J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
- C. Iselin, J. P. Koutchouk, Y. Marti, and J. Poole, “Implementation of the LEP Optics Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1509-1512.
- A. Sarrió Martínez, F. Loprete, and C. Maglioni, “Upgrade Strategies for the Proton Synchrotron Booster Dump at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP016, pp. 3761-3763.
- C. Bungau, R. J. Barlow, R. Cywinski, and S. C. Tygier, “Accelerator Driven Systems for Energy Production and Waste Transmutation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP147, pp. 1854-1856.
- M. Fitterer, O. S. Brüning, H. Burkhardt, B. J. Holzer, J. M. Jowett, and M. Klein, “Update on LHeC Ring-Ring Optics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC037, pp. 1242-1244.
- N. Milleron and R. Wolgast, “Cryopumping the Omnitron Ultra-Vacuum System Using Heat-Pipes" and Metallic Conductors"”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 941-945.
- T. Kii et al., “Design Study on THz Seeded FEL Using Photocathode RF Gun and Short Period Undulator”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUAAU03, pp. 196-199.
- J. F. DeFord, B. L. Held, and K. J. Willis, “Improved Algorithms for Multipacting Simulation in the Analyst Code”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP159, pp. 1785-1787.
- M. Takao, J. Schimizu, Y. Shimosaki, and K. Soutome, “Dynamic Aperture Study at the SPring-8 Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE067, pp. 4671-4673.
- R. Olsen and H. Langenbach, “High Precision Power Supplies for the National Synchrotron Light Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1408-1410.
- G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1353-1356.
- S. Myers, R. Olsen, and I. Wilson, “Hardware for the LEP Transverse Feedback System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 751-754.
- S. C. Sun et al., “Mechanical Design of a Cryogenic Permanent Magnet Undulator at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1475-1477.
- S. Kazakov et al., “High Power Couplers for the Project X Linac”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO006, pp. 361-363.
- Y. E. Tan and R. B. Hogan, “Australian Synchrotron BPM Electronics Upgrade”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 297-299.
- P. Ninin, “IEC 61508 Experience for the Development of the LHC Functional Safety Systems and Future Perspectives”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC004, pp. 400-402.
- F. Bordry, “Status of the Large Hadron Collider (LHC)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOXAGM01, pp. 1-5.
- R. D?Âlling, “Measurement of the Time-Structure of the 72 MeV Proton Beam in the PSI Injector-2 Cyclotron”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS05, pp. XX-XX.
- R. B. Hogan, S. Chen, and A. Michalczyk, “Standardising of Application Specific Implementations at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2460-2461.
- V. G. Kurakin and P. V. Kurakin, “Superconducting Stored Energy RF Linac as Free Electron Laser Driver”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 238-240.
- W. Joho, “High Intensity Problems in Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EI-03, pp. 337-347.
- B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
- J. Poole, “Requirements and Trends in the Control of Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 332-337.
- G. Karady, J. Kansog, and J. Schneider, “Resonant Power Supplies for a Large Synchrotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1480-1483.
- B. Kuiper, “Controls for the LEP Preinjector, The CERN PS Controls Group”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2044-2047.
- T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
- Y. Otake, “Construction Status of XFEL/SPring-8 (Its Stability Issue)”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUBAU06, pp. 222-226.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- Z. Duan and Q. Qin, “Optimization of Chromatic Sextupoles in Electron Storage Rings Using Genetic Algorithms”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ011, pp. 3705-3707.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Development and Industrial Fabrication of Superconducting Accelerator Modules”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1277-1280.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- F. Zimmermann and O. S. Brüning, “Parameter Space for the LHC Luminosity Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC005, pp. 127-129.
- F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
- G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1084-1087.
- Y. Sun et al., “Design of the JLC/NLC RDDS Structure Using Parallel Eigensolver Omega3P”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA04, pp. 380-382.
- N. M. King, “Spiral Ridge Studies at the University of Florida”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A06, pp. 18-23.
- R. Saban, “Integrating Industrial and Accelerator Control Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE01, pp. 2147-2151.
- J. F. DeFord, “Theoretical/Numerical Investigation of Induction Cavity Impedances for Moderate to Large Gap Widths”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU427, pp. 375-377.
- M. W. Poole et al., “4GLS - a New Type of Fourth Generation Light Source Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191.
- S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3544-3546.
- B. Yan, “Microbunching instability for beam swithyard transport”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS43, unpublished.
Back to search