Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. A. del Barrio Monta???®s, Y. Dutheil, T. Kramer, M. Sack, and V. Senaj, “Ultra-Fast Generator for Impact Ionization Triggering”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2872-2874. doi:10.18429/JACoW-IPAC2022-THPOTK044
[n] Y. Shobuda et al., “A Kicker Impedance Reduction Scheme with Diode Stack and Resistor at the RCS in J-PARC”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 162-169. doi:10.18429/JACoW-HB2023-TUC4I1
[n] A. Wolski and M. Venturini, “Dynamical Map for Combined Function Magnets with Solenoid, Dipole and Quadrupole Fields”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT148, pp. 2185-2187.
[n] K.-U. Kasemir, “Control System Studio Applications”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROPB02, pp. 692-694.
[n] A. V. Smirnov and A. A. Mikhailichenko, “HTS Wiggler Concept for a Damping Ring”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD021, pp. 599-601.
[n] P. Nenzi et al., “Proton Beam Applications for Silicon Bulk Micromachining”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2241-2244. doi:10.18429/JACoW-IPAC2015-TUPWI003
[n] Y. Jiao et al., “Progress of the Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2697-2699. doi:10.18429/JACoW-IPAC2017-WEPAB052
[n] N. Malitsky and R. Talman, “UAL 3: ASPECT-ORIENTED APPROACH”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH09, pp. XX-XX.
[n] P. Nenzi et al., “Development of a Passive Cavity Beam Intensity Monitor for Pulsed Proton Beams for Medical Applications”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 41-44. doi:10.18429/JACoW-IBIC2019-MOCO02
[n] J. F. Gournay, F. Garreau, A. Giraud, G. Gourcy, and J. Rouault, “Use of VMEBUS in Accelerator Applications”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1117-1120.
[n] M. Ferrario and R. W. A?ƒmann, “From Dreams to Reality: Prospects for Applying Advanced Accelerator Technology to Next Generation Scientific User Facilities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1-5. doi:10.18429/JACoW-IPAC2019-MOXPLM2
[n] D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 592-595. doi:10.18429/JACoW-IPAC2025-MOPS005
[n] P. K. Saha, H. Harada, H. Hotchi, Y. Irie, and F. Noda, “Realistic Beam Loss Estimation from the Nuclear Scattering at the RCS Charge-exchange Foil”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH122, pp. 333-335.
[n] G. Bisoffi, “Operational Experience with Superconducting Low Beta Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A20, pp. 190-203.
[n] B. Qin et al., “Design Study of a 250MeV Superconducting Isochronous Cyclotron for Proton Therapy”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPMH3, pp. 23-25.
[n] S. Kiy, P. M. Jung, T. Planche, O. Shelbaya, and V. V. Verzilov, “Use of the ISAC-II Flight Time Monitors toward Automated Tuning”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 195-199. doi:10.18429/JACoW-IBIC2023-TUP007
[n] S. Guiducci et al., “Proposal for Using DANE as Pulse Stretcher for the Linac Positron Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3258-3261. doi:10.18429/JACoW-IPAC2018-THPAK023
[n] P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper WECOTC01, pp. 332-336.
[n] B. I. Bondarev, “Study of Space Charge-Dominated Beam Bunching”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP60, pp. 210-212.
[n] A. V. Tsakanian, M. Dohlus, and I. Zagorodnov, “Numerical Studies of Resistive Wall Effects”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP075, pp. 1709-1711.
[n] H. Geng et al., “Beam Distribution Transformation with SFMs at 3MeV C-ADS Beamline”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 824-826. doi:10.18429/JACoW-IPAC2014-MOPRI090
[n] P. K. Saha, H. Harada, M. Kinsho, H. Sako, and M. Yamamoto, “First Simulation Results of Heavy-Ion Acceleration in the RCS of J-PARC”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM2C02, pp. 127-129.
[n] T. Summers, D. B. Crisp, and A. C. C. Villari, “CS-Studio Operator Training at ReA3”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2061-2063. doi:10.18429/JACoW-IPAC2018-WEPAF090
[n] C. H. Kuo et al., “Modernized of the Booster Synchrotron Diagnostics in the Taiwan Light Source”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA02, pp. 329-333.
For LaTeX
Use Complete Form
For BibTeX
References
- A. A. del Barrio Monta???®s, Y. Dutheil, T. Kramer, M. Sack, and V. Senaj, “Ultra-Fast Generator for Impact Ionization Triggering”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2872-2874.
- Y. Shobuda et al., “A Kicker Impedance Reduction Scheme with Diode Stack and Resistor at the RCS in J-PARC”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC4I1, pp. 162-169.
- A. Wolski and M. Venturini, “Dynamical Map for Combined Function Magnets with Solenoid, Dipole and Quadrupole Fields”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT148, pp. 2185-2187.
- K.-U. Kasemir, “Control System Studio Applications”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROPB02, pp. 692-694.
- A. V. Smirnov and A. A. Mikhailichenko, “HTS Wiggler Concept for a Damping Ring”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD021, pp. 599-601.
- P. Nenzi et al., “Proton Beam Applications for Silicon Bulk Micromachining”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2241-2244.
- Y. Jiao et al., “Progress of the Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2697-2699.
- N. Malitsky and R. Talman, “UAL 3: ASPECT-ORIENTED APPROACH”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH09, pp. XX-XX.
- P. Nenzi et al., “Development of a Passive Cavity Beam Intensity Monitor for Pulsed Proton Beams for Medical Applications”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 41-44.
- J. F. Gournay, F. Garreau, A. Giraud, G. Gourcy, and J. Rouault, “Use of VMEBUS in Accelerator Applications”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1117-1120.
- M. Ferrario and R. W. A?ƒmann, “From Dreams to Reality: Prospects for Applying Advanced Accelerator Technology to Next Generation Scientific User Facilities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1-5.
- D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS005, pp. 592-595.
- P. K. Saha, H. Harada, H. Hotchi, Y. Irie, and F. Noda, “Realistic Beam Loss Estimation from the Nuclear Scattering at the RCS Charge-exchange Foil”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH122, pp. 333-335.
- G. Bisoffi, “Operational Experience with Superconducting Low Beta Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A20, pp. 190-203.
- B. Qin et al., “Design Study of a 250MeV Superconducting Isochronous Cyclotron for Proton Therapy”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPMH3, pp. 23-25.
- S. Kiy, P. M. Jung, T. Planche, O. Shelbaya, and V. V. Verzilov, “Use of the ISAC-II Flight Time Monitors toward Automated Tuning”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP007, pp. 195-199.
- S. Guiducci et al., “Proposal for Using DANE as Pulse Stretcher for the Linac Positron Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3258-3261.
- P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper WECOTC01, pp. 332-336.
- B. I. Bondarev, “Study of Space Charge-Dominated Beam Bunching”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP60, pp. 210-212.
- A. V. Tsakanian, M. Dohlus, and I. Zagorodnov, “Numerical Studies of Resistive Wall Effects”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP075, pp. 1709-1711.
- H. Geng et al., “Beam Distribution Transformation with SFMs at 3MeV C-ADS Beamline”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 824-826.
- P. K. Saha, H. Harada, M. Kinsho, H. Sako, and M. Yamamoto, “First Simulation Results of Heavy-Ion Acceleration in the RCS of J-PARC”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM2C02, pp. 127-129.
- T. Summers, D. B. Crisp, and A. C. C. Villari, “CS-Studio Operator Training at ReA3”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2061-2063.
- C. H. Kuo et al., “Modernized of the Booster Synchrotron Diagnostics in the Taiwan Light Source”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA02, pp. 329-333.
Back to search