JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2688-2691. 
[n]	Q. Gao, H. B. Chen, J. Shi, W. Gai, and C.-J. Jing, “Beam Position Monitor Design for Dielectric Wakefield Accelerator In THz Range”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 171-174. doi:10.18429/JACoW-IPAC2016-MOPMB037
[n]	S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921. 
[n]	S. M. Gerbick, M. P. Kelly, and J. D. Fuerst, “A New Electropolishing System at ANL for Superconducting Quarter-Wave Resonators”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP36, pp. XX-XX. 
[n]	H. Deitinghoff et al., “Design Study of High-Energy, High-Current RF Accelerators for Ion Implantation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1468-1471. 
[n]	E. Laface, C. Santoni, W. Scandale, and E. Y. Wildner, “Investigations on a Q0 Doublet Optics for the LHC Luminosity Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC021, pp. 3023-3025. 
[n]	C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881. 
[n]	J. J. Beebe-Wang, J. D. Galambos, J. A. Holmes, Y. Y. Lee, A. Luccio, and D. K. Olsen, “Status of the SNS Injection System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP49C, pp. 341-343. 
[n]	G. Wang et al., “On-resonance round beam experiment in the HLS-II storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1079-1081. doi:10.18429/JACoW-IPAC2023-MOPM039
[n]	B. Deriy, L. Emery, A. L. Hillman, G. S. Sprau, and J. Wang, “Pulsed Magnet Power Supplies for Improved Beam Trajectory Stability at the APS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS136, pp. 2697-2699. 
[n]	J-P. Airiau, V. Denis, P. Fourtillan, C. Lacombe, and S. Vermersch, “SCIBORG: Analyzing and Monitoring LMJ Facility Health and Performance Indicators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1604. doi:10.18429/JACoW-ICALEPCS2019-THCPL04
[n]	Y.-C. Lin et al., “Dose rate and accumulated dose around the Taiwan Photon Source in various scenarios”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4077-4080. doi:10.18429/JACoW-IPAC2023-THPA053
[n]	I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448. 
[n]	R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757. 
[n]	K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340. 
[n]	H. de Oliveira Caiafa Duarte, A. Andersson, D. Olsson, K. Åhnberg, M. Al-Najdawi, and P. Tavares, “HOM dampers design for the MAX IV 100 MHz RF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2958-2961. doi:10.18429/JACoW-IPAC2023-WEPA126
[n]	M. A. Allen, L. G. Karvonen, J.-L. Pellegrin, and P. B. Wilson, “RF System for the PEP Storage Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1780-1783. 
[n]	J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557. 
[n]	N. Baboi et al., “Commissioning of the Electronics for HOM-based Beam Diagnostics at the 3.9 GHz Accelerating Module at FLASH”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF06, pp. 311-314. 
[n]	N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444. 
[n]	A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905. 
[n]	C. Ozkan Loch, M. Gregorio, R. Ischebeck, N. Samadi, and J. Vila Comamala, “Beam size measurement developments at SLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4814-4816. doi:10.18429/JACoW-IPAC2023-THPL148
[n]	U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1190-1193. doi:10.18429/JACoW-IPAC2017-MOPVA144
[n]	P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378. 
[n]	R. Lehe, G. Lambert, A. Lifschitz, V. Malka, J.-M. Rax, and X. Davoine, “Numerical Study of an FEL based on LWFA Electrons and a Laser-plasma Wiggler”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD48, pp. 642-645. 
[n]	S. Appel and O. Boine-Frankenheim, “Optimization of Multi-turn Injection into a Heavy-Ion Synchrotron using Genetic Algorithms”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3689-3692. doi:10.18429/JACoW-IPAC2015-THPF007
[n]	S. J. Payne, “Strip Line Monitor design for the ISIS Proton Synchrotron using the FEA program HFSS”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC28, pp. 435-437. 
[n]	A. Lumpkin et al., “Initial Diagnostics Commissioning Results for the Advanced Photon Source (APS)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ10, pp. 2473-2475. 
[n]	S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290. 
[n]	Y. W. An, H. F. Ji, and S. Wang, “Study of the Beam Injection and Extraction of the Proton Irradiation Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI030, pp. 348-350. 
[n]	B. Deriy, A. L. Hillman, G. S. Sprau, and J. Wang, “The APS Septum Magnet Power Supplies Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE069, pp. 3795-3797. 
[n]	D. Trbojevic et al., “Commissioning of RHIC at 100 GeV/Nucleon”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE062, pp. 380-382. 
[n]	R. Geller and B. Jacquot, “Sources for Highly Charged Ions - The ECRIS Status”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0006, pp. 31-35. 
[n]	L. Shen, Y. L. Chi, and C. Huang, “The Pulsed Power Supply using IGBT Topology for CSNS Injection System Bump Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN044, pp. 2140-2142. 
[n]	S. Matthies, H. Br?ñuning, A. Schwinn, and S. Deghaye, “FESA3 Integration in GSI for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO006, pp. 43-45. 
[n]	M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607. 
[n]	P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0012, pp. 356-358. 
[n]	J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246. 
[n]	W. I. B. Smith, “Beam Defining Slits and Focusing Grids Near the Ion Source”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D03, pp. 183-191. 
[n]	C. H. Huang et al., “Beam Loss Study of TLS Using RadFETs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1103-1105. doi:10.18429/JACoW-IPAC2015-MOPTY072
[n]	S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197. 
[n]	S. Sampayan et al., “Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB010, pp. 716-718. 
[n]	R. Giannini, “Calculation of Protonium Production Rate from Corotating Beams of P and H_ in LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 505-508. 
[n]	Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488. 
[n]	J. P. Thermeau et al., “The First Tests on Vertical Cryostat GERSEMI at FREIA Facility”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 921-924. doi:10.18429/JACoW-SRF2019-THP034
[n]	A. Lumpkin, B. Yang, Y. Chung, R. Dejus, G. Voykov, and G. Dattoli, “Preliminary Calculations on the Determination of APS Particle-Beam Parameters Based on Undulator Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC03, pp. 2598-2600. 
[n]	E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645. 
[n]	X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 917-919. doi:10.18429/JACoW-SRF2017-THPB078
[n]	E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251. 
[n]	M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633. 
[n]	S. Canella and O. Carletto, “The Electronic Logbook for LNL Accelerators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN012, pp. 260-262. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search