Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT06, pp. XX-XX.
[n] A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
[n] N. Gandolfo et al., “Deformation Tuner Design for a Double Spoke Cavity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP078, pp. 1104-1106.
[n] S. Lauber et al., “Longitudinal Phase Space Reconstruction for the Heavy Ion Accelerator HELIAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 266-270. doi:10.18429/JACoW-IBIC2019-TUCO04
[n] O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3617-3619. doi:10.18429/JACoW-IPAC2014-THPME153
[n] T. Rublack et al., “Design of a Spatio-temporal 3-D Ellipsoidal Photo Cathode Laser System for the High Brightness Photo Injector PITZ”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP060, pp. 878-880.
[n] Y. Suetsugu, T. Ishibashi, S. Terui, H. Ishizaki, A. Kimura, and T. Sawhata, “Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3654-3656. doi:10.18429/JACoW-IPAC2016-THPMY002
[n] Z. Qazi, A. Ismail, I. Saleh, P. Betinelli-Deck, and M. T. Heron, “Design and Implementation of Sesame's Booster Ring Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC104, pp. 352-355.
[n] E. D. Matias, L. Baribeau, T. Batten, J. W. Li, and W. A. Wurtz, “Achieving a Successful Alarm Management Deployment ÔÇô The CLS Experience”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB06, pp. 1062-1065.
[n] H. Yoshikawa et al., “Performance of the Control System for the J-PARC Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP003, pp. 52-54.
[n] E. Yamakawa, S. Machida, A. Pertica, and C. C. Wilcox, “Design and Development of Beam Diagnostics for an FFA-FFA Ring for ISIS-II Upgrade Studies”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 214-218. doi:10.18429/JACoW-IBIC2019-MOPP047
[n] S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
[n] F. B. Petrov and O. Boine-Frankenheim, “Simulations of Electron Cloud Long Range Wakefields”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 165-167. doi:10.18429/JACoW-IPAC2015-MOPWA030
[n] V. G. Dudnikov, M. A. Cummings, R. P. Johnson, and A. V. Sy, “Polarized Deuteron Negative Ion Source for Nuclear Physics Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4665-4667. doi:10.18429/JACoW-IPAC2018-THPML009
[n] B. Singh, M. Apollonio, R. Bartolini, I. P. S. Martin, A. Alekou, and T. Pulampong, “Injection Using a Non-linear Kicker Located in the Existing Injection Straight at Diamond Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 840-843. doi:10.18429/JACoW-IPAC2016-MOPOW055
[n] M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
[n] E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
[n] Yu. G. Basargin et al., “Invited Paper: Status of the Kiev 240-cm Cyclotron Facility”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-02, pp. 1879-1881.
For LaTeX
Use Complete Form
For BibTeX
References
- C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT06, pp. XX-XX.
- A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
- N. Gandolfo et al., “Deformation Tuner Design for a Double Spoke Cavity”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP078, pp. 1104-1106.
- S. Lauber et al., “Longitudinal Phase Space Reconstruction for the Heavy Ion Accelerator HELIAC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 266-270.
- O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3617-3619.
- T. Rublack et al., “Design of a Spatio-temporal 3-D Ellipsoidal Photo Cathode Laser System for the High Brightness Photo Injector PITZ”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP060, pp. 878-880.
- Y. Suetsugu, T. Ishibashi, S. Terui, H. Ishizaki, A. Kimura, and T. Sawhata, “Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3654-3656.
- Z. Qazi, A. Ismail, I. Saleh, P. Betinelli-Deck, and M. T. Heron, “Design and Implementation of Sesame's Booster Ring Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC104, pp. 352-355.
- E. D. Matias, L. Baribeau, T. Batten, J. W. Li, and W. A. Wurtz, “Achieving a Successful Alarm Management Deployment ÔÇô The CLS Experience”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB06, pp. 1062-1065.
- H. Yoshikawa et al., “Performance of the Control System for the J-PARC Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP003, pp. 52-54.
- E. Yamakawa, S. Machida, A. Pertica, and C. C. Wilcox, “Design and Development of Beam Diagnostics for an FFA-FFA Ring for ISIS-II Upgrade Studies”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 214-218.
- S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
- F. B. Petrov and O. Boine-Frankenheim, “Simulations of Electron Cloud Long Range Wakefields”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 165-167.
- V. G. Dudnikov, M. A. Cummings, R. P. Johnson, and A. V. Sy, “Polarized Deuteron Negative Ion Source for Nuclear Physics Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4665-4667.
- B. Singh, M. Apollonio, R. Bartolini, I. P. S. Martin, A. Alekou, and T. Pulampong, “Injection Using a Non-linear Kicker Located in the Existing Injection Straight at Diamond Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 840-843.
- M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
- E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
- Yu. G. Basargin et al., “Invited Paper: Status of the Kiev 240-cm Cyclotron Facility”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-02, pp. 1879-1881.
Back to search
