Favourites
For Word
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n] P. Piot et al., “Generation of Picosecond Electron-bunch Trains with Variable Spacing Using a Multi-pulse Photocathode Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD077, pp. 2705-2707.
[n] G. S. Sedykh and E. V. Gorbachev, “The Equipment Database for the Control System of the NICA Accelerator Complex”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC012, pp. 1111-1113.
[n] H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
[n] J. S. Berg, “A Generic Formulation for Emittance and Lattice Function Evolution for Non-Hamiltonian Systems with Stochastic Effects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 740-742. doi:10.18429/JACoW-IPAC2015-MOPMN018
[n] Y.-M. Shin, “Dielectric-plate-implanted Higher Order Mode (HOM) Waveguide for High Intensity Multi-beam Device Application”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP026, pp. 2781-2783.
[n] N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, and V. Shevtsov, “Axial Injection Beam-Line of C400 Cyclotron for Hadron Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN081, pp. 1562-1564.
[n] M. Ounsy, G. Abeille, S. Pierre-Joseph Zephir, K. S. Saintin, and E. De Ley, “Integrating a Workflow Engine within a Commercial SCADA to Build End User Applications in a Scientific Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS029, pp. 860-862.
[n] D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
[n] V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3559-3562. doi:10.18429/JACoW-IPAC2014-THPME134
[n] L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2601-2604. doi:10.18429/JACoW-IPAC2015-WEPWA045
[n] Y.-M. Shin, “PBG-slab Embedded Traveling Wave Structure for Planar Beam Accelerator Application”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP027, pp. 2784-2786.
[n] Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
[n] A. Gomez Alonso, “Impact Distribution of the Beam Losses at the LHC Collimators in Case of Magnet Failures”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP068, pp. 2674-2676.
[n] A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3673-3676. doi:10.18429/JACoW-IPAC2015-THPF001
[n] M. Lechman et al., “Managing Infrastructure in the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC015, pp. 1122-1124.
[n] K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_083.
[n] B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3563-3565. doi:10.18429/JACoW-IPAC2014-THPME135
[n] C. B. Boccard, A. Bertarelli, A. Dallocchio, M. Gasior, L. Gentini, and A. A. Nosych, “Embedded Collimator Beam Position Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD18, pp. 80-82.
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
[n] R. Bartolini et al., “OPALS: The Oxford Plasma Accelerator Light Source Project”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH081, pp. 163-166.
[n] J. Barranco, P. K. Skowronski, F. Tecker, and C. Biscari, “Design of the CLIC Drive Beam Recombination Complex”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC022, pp. 1045-1047.
[n] D. Draskovic, C. B. Boccard, O. R. Jones, T. Lefevre, and M. Wendt, “Electromagnetic Design and Optimization of Directivity of Stripline Beam Position Monitors for the High Luminosity Large Hadron Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1051-1053. doi:10.18429/JACoW-IPAC2015-MOPTY053
[n] H. Hassanzadegan, A. Jansson, and K. Strnisa, “System Overview and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF30, pp. 891-893.
[n] S. P. Yun et al., “Design of 100 MeV Proton Beam Irradiation Facility for the PEFP 100 MeV Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD033, pp. 2579-2581.
[n] F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
- P. Piot et al., “Generation of Picosecond Electron-bunch Trains with Variable Spacing Using a Multi-pulse Photocathode Laser”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD077, pp. 2705-2707.
- G. S. Sedykh and E. V. Gorbachev, “The Equipment Database for the Control System of the NICA Accelerator Complex”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC012, pp. 1111-1113.
- H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
- J. S. Berg, “A Generic Formulation for Emittance and Lattice Function Evolution for Non-Hamiltonian Systems with Stochastic Effects”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 740-742.
- Y.-M. Shin, “Dielectric-plate-implanted Higher Order Mode (HOM) Waveguide for High Intensity Multi-beam Device Application”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP026, pp. 2781-2783.
- N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, and V. Shevtsov, “Axial Injection Beam-Line of C400 Cyclotron for Hadron Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN081, pp. 1562-1564.
- M. Ounsy, G. Abeille, S. Pierre-Joseph Zephir, K. S. Saintin, and E. De Ley, “Integrating a Workflow Engine within a Commercial SCADA to Build End User Applications in a Scientific Environment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS029, pp. 860-862.
- D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
- V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3559-3562.
- L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2601-2604.
- Y.-M. Shin, “PBG-slab Embedded Traveling Wave Structure for Planar Beam Accelerator Application”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP027, pp. 2784-2786.
- Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
- A. Gomez Alonso, “Impact Distribution of the Beam Losses at the LHC Collimators in Case of Magnet Failures”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP068, pp. 2674-2676.
- A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3673-3676.
- M. Lechman et al., “Managing Infrastructure in the ALICE Detector Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC015, pp. 1122-1124.
- K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_083.
- B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3563-3565.
- C. B. Boccard, A. Bertarelli, A. Dallocchio, M. Gasior, L. Gentini, and A. A. Nosych, “Embedded Collimator Beam Position Monitors”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD18, pp. 80-82.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
- R. Bartolini et al., “OPALS: The Oxford Plasma Accelerator Light Source Project”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH081, pp. 163-166.
- J. Barranco, P. K. Skowronski, F. Tecker, and C. Biscari, “Design of the CLIC Drive Beam Recombination Complex”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC022, pp. 1045-1047.
- D. Draskovic, C. B. Boccard, O. R. Jones, T. Lefevre, and M. Wendt, “Electromagnetic Design and Optimization of Directivity of Stripline Beam Position Monitors for the High Luminosity Large Hadron Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1051-1053.
- H. Hassanzadegan, A. Jansson, and K. Strnisa, “System Overview and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF30, pp. 891-893.
- S. P. Yun et al., “Design of 100 MeV Proton Beam Irradiation Facility for the PEFP 100 MeV Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD033, pp. 2579-2581.
- F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
Back to search