Favourites
For Word
[n] H. Schoeler and H. Euteneuer, “Corrosion of Copper by Deionized Cooling Water”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1067-1069.
[n] P. Jurj et al., “Refined design of the front-end complex for a Muon Cooling Demonstrator at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1105, unpublished.
[n] M. A. Leonova et al., “MICE Cavity Installation and Commissioning/Operation at MTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3342-3344. doi:10.18429/JACoW-IPAC2015-WEPTY032
[n] P. Jurj, R. Kamath, R. Losito, J. Pasternak, and C. Rogers, “Design of the front-end complex for a muon cooling demonstrator at CERN”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 643-646. doi:10.18429/JACoW-IPAC2025-MOPS023
[n] W. E. Fox and R. G. Schamaun, “The FMIT Experimental Draft Tube”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2761-2764.
[n] H. D. Betz, “A New Technique for High Precision Alignment of Linear Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-6, pp. 60-67.
[n] D. Zhang et al., “THz Driven Electron Acceleration with a Multilayer Structure”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 512-514. doi:10.18429/JACoW-IPAC2017-MOPIK007
[n] D. S?ínchez-Herranz et al., “Status of the Engineering Design of the IFMIF-DONES High Energy Beam Transport Line and Beam Dump System”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2520-2523. doi:10.18429/JACoW-IPAC2022-THPOST035
[n] Y. Iwashita et al., “High-efficiency neutron transport using magnetic gradient with permanent magnets”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7726, unpublished.
[n] H. Jin, J.-H. Jang, and D. Jeon, “Beam Steering Studies for the Superconducting Linac of the RAON Accelerator”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 199-202. doi:10.18429/JACoW-HB2016-MOPL007
[n] A. Neumann et al., “Results and Performance Simulations of the Main Linac Design for BERLinPro”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB067, pp. 333-335.
[n] H.-J. Kwon, H.-S. Kim, D.-H. Kim, S. Lee, and S.-P. Yun, “Upgrade plan of the 3 MeV RFQ at KOMAC”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM006, unpublished.
[n] I. S. Hong, Y. S. Hwang, H. J. Kim, Y. S. Cho, and B. H. Choi, “Development of Ion Sources for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D006, pp. 86-88.
[n] M. Yamada et al., “The Novel Method of Focusing-SANS with Rotating Magnetic Sextupole Lens and Very Cold Neutrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB067, pp. 427-429.
[n] J. R. Faulkner and T. J. Boyd Jr, “LAMPF 200 MHz Power Sources”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-3, pp. 87-90.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Schoeler and H. Euteneuer, “Corrosion of Copper by Deionized Cooling Water”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1067-1069.
- P. Jurj et al., “Refined design of the front-end complex for a Muon Cooling Demonstrator at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1105, this conference.
- M. A. Leonova et al., “MICE Cavity Installation and Commissioning/Operation at MTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3342-3344.
- P. Jurj, R. Kamath, R. Losito, J. Pasternak, and C. Rogers, “Design of the front-end complex for a muon cooling demonstrator at CERN”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS023, pp. 643-646.
- W. E. Fox and R. G. Schamaun, “The FMIT Experimental Draft Tube”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2761-2764.
- H. D. Betz, “A New Technique for High Precision Alignment of Linear Accelerators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper A-6, pp. 60-67.
- D. Zhang et al., “THz Driven Electron Acceleration with a Multilayer Structure”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 512-514.
- D. S?ínchez-Herranz et al., “Status of the Engineering Design of the IFMIF-DONES High Energy Beam Transport Line and Beam Dump System”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2520-2523.
- Y. Iwashita et al., “High-efficiency neutron transport using magnetic gradient with permanent magnets”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7726, this conference.
- H. Jin, J.-H. Jang, and D. Jeon, “Beam Steering Studies for the Superconducting Linac of the RAON Accelerator”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 199-202.
- A. Neumann et al., “Results and Performance Simulations of the Main Linac Design for BERLinPro”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB067, pp. 333-335.
- H.-J. Kwon, H.-S. Kim, D.-H. Kim, S. Lee, and S.-P. Yun, “Upgrade plan of the 3 MeV RFQ at KOMAC”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM006, unpublished.
- I. S. Hong, Y. S. Hwang, H. J. Kim, Y. S. Cho, and B. H. Choi, “Development of Ion Sources for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D006, pp. 86-88.
- M. Yamada et al., “The Novel Method of Focusing-SANS with Rotating Magnetic Sextupole Lens and Very Cold Neutrons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB067, pp. 427-429.
- J. R. Faulkner and T. J. Boyd Jr, “LAMPF 200 MHz Power Sources”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-3, pp. 87-90.
Back to search