Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Zagel, M. Hu, A. Jansson, R. Thurman-Keup, and M.-J. Yang, “Complementary Methods of Transverse Emittance Measurement”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF069, pp. 282-286.
[n] A. Potylitsyn, S. Yu. Gogolev, G. Kube, W. Lauth, A. I. Novokshonov, and A. V. Vukolov, “Experimental Investigation of Spectral-Angular Cherenkov Radiation Characteristics From 855 MeV Electrons”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP36, unpublished.
[n] S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
[n] J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
[n] M. Migliorati, N. Biancacci, H. Damerau, G. Sterbini, L. Ventura, and S. Persichelli, “Measurements of the CERN PS Longitudinal Resistive Coupling Impedance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 626-629. doi:10.18429/JACoW-IPAC2016-MOPOR014
[n] S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1099-1102. doi:10.18429/JACoW-IPAC2023-MOPM047
[n] O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688.
[n] I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3147-3150. doi:10.18429/JACoW-IPAC2023-WEPL018
[n] N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
[n] H. Ferguson et al., “SRF cavity instability detection with machine learning at CEBAF”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1835-1838. doi:10.18429/JACoW-IPAC2024-TUPS69
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] E. M. Vinogradova, N. V. Egorov, and E. V. Kalaturskaja, “The Infinitely Thin Field Emitter Mathematical Modeling”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 342-344. doi:10.18429/JACoW-RUPAC2016-TUPSA064
[n] H.-C. Chao, H. Ghasem, and I. Martin, “Improvement on beam-based alignment methods by reliability weighted average technique”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 607-610. doi:10.18429/JACoW-IPAC2025-MOPS011
[n] K. Oide, “Design of Optics for the Final Focus Test Beam at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1319-1322.
[n] F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
[n] P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1647-1650.
[n] G. M. Kazakevich, H. T. Edwards, R. P. Fliller, S. Nagaitsev, J. Ruan, and R. Thurman-Keup, “Optical Transition Radiation Interferometry for the A0 Photoinjector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC047, pp. 1164-1166.
[n] D. Giove, A. Bosotti, C. Pagani, and G. Varisco, “A Wire Position Monitor (WPM) System to Control the Cold Mass Movements Inside the TTF Cryomodule”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P067, pp. 3657-3659.
[n] N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1600-1603. doi:10.18429/JACoW-IPAC2021-TUPAB095
[n] A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
[n] M. P. May and M. A. Harrison, “Lambertson Magnet Design for the Tevatron Extraction Channel”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2836-2838.
[n] M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
[n] M. Wendt et al., “Beam Instrumentation for Future High Intense Hadron Accelerator at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF02, pp. 440-449.
[n] R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
[n] M. Pachan, “Running-Up of 10 MeV Proton Linear Accelerator at Swierk”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper A-6, pp. 67-76.
[n] Y. Funakoshi et al., “KEKB Performance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH131, pp. 3546-3548.
[n] T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2406-2408. doi:10.18429/JACoW-IPAC2023-TUPM086
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Zagel, M. Hu, A. Jansson, R. Thurman-Keup, and M.-J. Yang, “Complementary Methods of Transverse Emittance Measurement”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF069, pp. 282-286.
- A. Potylitsyn, S. Yu. Gogolev, G. Kube, W. Lauth, A. I. Novokshonov, and A. V. Vukolov, “Experimental Investigation of Spectral-Angular Cherenkov Radiation Characteristics From 855 MeV Electrons”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP36, unpublished.
- S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20.
- J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
- M. Migliorati, N. Biancacci, H. Damerau, G. Sterbini, L. Ventura, and S. Persichelli, “Measurements of the CERN PS Longitudinal Resistive Coupling Impedance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 626-629.
- S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM047, pp. 1099-1102.
- O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 685-688.
- I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL018, pp. 3147-3150.
- N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
- H. Ferguson et al., “SRF cavity instability detection with machine learning at CEBAF”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS69, pp. 1835-1838.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- E. M. Vinogradova, N. V. Egorov, and E. V. Kalaturskaja, “The Infinitely Thin Field Emitter Mathematical Modeling”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 342-344.
- H.-C. Chao, H. Ghasem, and I. Martin, “Improvement on beam-based alignment methods by reliability weighted average technique”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS011, pp. 607-610.
- K. Oide, “Design of Optics for the Final Focus Test Beam at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1319-1322.
- F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
- P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1647-1650.
- G. M. Kazakevich, H. T. Edwards, R. P. Fliller, S. Nagaitsev, J. Ruan, and R. Thurman-Keup, “Optical Transition Radiation Interferometry for the A0 Photoinjector”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC047, pp. 1164-1166.
- D. Giove, A. Bosotti, C. Pagani, and G. Varisco, “A Wire Position Monitor (WPM) System to Control the Cold Mass Movements Inside the TTF Cryomodule”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P067, pp. 3657-3659.
- N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1600-1603.
- A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
- M. P. May and M. A. Harrison, “Lambertson Magnet Design for the Tevatron Extraction Channel”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2836-2838.
- M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
- M. Wendt et al., “Beam Instrumentation for Future High Intense Hadron Accelerator at Fermilab”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF02, pp. 440-449.
- R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
- M. Pachan, “Running-Up of 10 MeV Proton Linear Accelerator at Swierk”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper A-6, pp. 67-76.
- Y. Funakoshi et al., “KEKB Performance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH131, pp. 3546-3548.
- T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM086, pp. 2406-2408.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
Back to search