Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. J. Coleman, D. T. Abell, D. L. Bruhwiler, B. Nash, I. V. Pogorelov, and H. Zhang, “Simulating Magnetized Electron Cooling for EIC with JSPEC”, presented at the HB'21, Batavia, IL, USA, Oct. 2021, paper MOP25, unpublished.
[n] S. M. Khan, M. Gehlot, H. Jeevakhan, and G. Mishra, “Hall Probe Magnetic Measurement of 50 mm Period PPM Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2744-2746. doi:10.18429/JACoW-IPAC2022-THPOPT064
[n] H. Dinter, R. W. A?ƒmann, F. Burkart, M. J. Kellermeier, and C. Lechner, “Status of the Dedicated Electron Diagnostic Beamline at AXSIS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 902-905. doi:10.18429/JACoW-IPAC2021-MOPAB284
[n] F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, A. Krasnykh, and A. Kardo-Sysoev, “A Kicker Driver Exploiting Drift Step Recovery Diodes for the International Linear Collider”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP058, pp. 536-538.
[n] R. J. England, R. L. Byer, and P. Hommelhoff, “Progress in Developing an Accelerator on a Chip”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 16-20. doi:10.18429/JACoW-IPAC2022-MOIYGD1
[n] N. Delerue et al., “A Massive Open Online Course on Particle Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 512-515. doi:10.18429/JACoW-IPAC2018-MOPML050
[n] M. Sameed et al., “Status of Beam Instrumentation at the Electron Beam Test Stand at CERN”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 16-21. doi:10.18429/JACoW-COOL2023-TUPAM2R1
[n] L. van Riesen-Haupt and T. Pieloni, “Refining dynamic aperture calculations for highly damped accelerators: methods and applications to the FCC-ee”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 270-273. doi:10.18429/JACoW-IPAC2025-MOPM005
[n] Y. Li, X. Lu, S. Wang, and S. Xu, “Study for space charge effect in tune space at CSNS-II/RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2299-2301. doi:10.18429/JACoW-IPAC2023-TUPM046
[n] F. Lin et al., “Perspective of a Dual Energy Electron Storage Ring Cooler for a Hadron Beam Cooling”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper MOPPM1R1, unpublished.
[n] K. Hwang et al., “Bayesian active learning for converging posteriors in latent variable inference for control systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1214-1219. doi:10.18429/JACoW-ICALEPCS2025-WEPD075
[n] N. A. Stilin et al., “Status Update on CornellÔÇÖs SRF Compact Conduction Cooled Cryomodule”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1299-1302. doi:10.18429/JACoW-IPAC2022-TUPOTK037
[n] T. Zhang et al., “Physics application software for FRIB: from commissioning to operational excellence”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1141-1146. doi:10.18429/JACoW-ICALEPCS2025-WEPD045
[n] S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 160-163. doi:10.18429/JACoW-NAPAC2022-MOPA50
[n] B. Popovic et al., “Fabrication and testing of mode couplers for a 180 GHz colinear wakefield accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 485-488. doi:10.18429/JACoW-IPAC2024-MOPR15
[n] M. J. Kellermeier, R. Assmann, T. Vinatier, and W. Hillert, “Numerical design of a compact TE11-to-TM01 mode converter for THz-driven electron acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2916-2919. doi:10.18429/JACoW-IPAC2023-WEPA113
[n] O. Xiao et al., “Design and test of a S band TW buncher for the injector linac of HEPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 140-141. doi:10.18429/JACoW-IPAC2024-MOPC35
[n] O. Novotny, “Low-Energy Electron Cooling at the Cryogenic Storage Ring”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper MOPPM1R2, unpublished.
[n] A. P. Kuznetsov, P. V. Sasorov, and D. A. Sobur, “Plasma lens investigation for the heavy ion accelerator AT ITEP”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP16, pp. XX-XX.
[n] S. F. Rey et al., “Experience with Beam Transfer Function Measurements for Setting-up the Stochastic Cooling System in the CERN Anti-Proton Decelerator (AD)”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 102-105. doi:10.18429/JACoW-COOL2023-THPOSRP22
[n] N. Bruchon, I. Karpov, N. Madysa, G. Papotti, and D. Quartullo, “Operational Tool for Automatic Setup of Controlled Longitudinal Emittance Blow-Up in the CERN SPS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 723-728. doi:10.18429/JACoW-ICALEPCS2023-TUPDP086
[n] A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL060, unpublished.
[n] T. Weiland et al., “Massively Parallel Wake Field Computations in Long Accelerator Structures”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP010, pp. 52-54.
[n] E. Ferrari et al., “The ACHIP Experimental Chambers at PSI”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 336-339. doi:10.18429/JACoW-FEL2017-TUP053
[n] N. Stilin et al., “Design and commissioning of a new SRF cavity for a conduction-cooled system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2987-2990. doi:10.18429/JACoW-IPAC2023-WEPA143
[n] H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
[n] J. Bernardini et al., “Strategies for mitigating residual magnetic field effect on pre-production PIP-II SSR2 cryomodule performance”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 187-190. doi:10.18429/JACoW-LINAC2024-MOPB063
[n] H. Shoaee and R. C. Sass, “CATER: An Online Problem Tracking Facility for SLC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1946-1949.
For LaTeX
Use Complete Form
For BibTeX
References
- S. J. Coleman, D. T. Abell, D. L. Bruhwiler, B. Nash, I. V. Pogorelov, and H. Zhang, “Simulating Magnetized Electron Cooling for EIC with JSPEC”, presented at the 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper MOP25, unpublished.
- S. M. Khan, M. Gehlot, H. Jeevakhan, and G. Mishra, “Hall Probe Magnetic Measurement of 50 mm Period PPM Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2744-2746.
- H. Dinter, R. W. A?ƒmann, F. Burkart, M. J. Kellermeier, and C. Lechner, “Status of the Dedicated Electron Diagnostic Beamline at AXSIS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 902-905.
- F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, A. Krasnykh, and A. Kardo-Sysoev, “A Kicker Driver Exploiting Drift Step Recovery Diodes for the International Linear Collider”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP058, pp. 536-538.
- R. J. England, R. L. Byer, and P. Hommelhoff, “Progress in Developing an Accelerator on a Chip”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 16-20.
- N. Delerue et al., “A Massive Open Online Course on Particle Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 512-515.
- M. Sameed et al., “Status of Beam Instrumentation at the Electron Beam Test Stand at CERN”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper TUPAM2R1, pp. 16-21.
- L. van Riesen-Haupt and T. Pieloni, “Refining dynamic aperture calculations for highly damped accelerators: methods and applications to the FCC-ee”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM005, pp. 270-273.
- Y. Li, X. Lu, S. Wang, and S. Xu, “Study for space charge effect in tune space at CSNS-II/RCS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM046, pp. 2299-2301.
- F. Lin et al., “Perspective of a Dual Energy Electron Storage Ring Cooler for a Hadron Beam Cooling”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper MOPPM1R1, unpublished.
- K. Hwang et al., “Bayesian active learning for converging posteriors in latent variable inference for control systems”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1214-1219.
- N. A. Stilin et al., “Status Update on CornellÔÇÖs SRF Compact Conduction Cooled Cryomodule”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1299-1302.
- T. Zhang et al., “Physics application software for FRIB: from commissioning to operational excellence”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1141-1146.
- S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 160-163.
- B. Popovic et al., “Fabrication and testing of mode couplers for a 180 GHz colinear wakefield accelerator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR15, pp. 485-488.
- M. J. Kellermeier, R. Assmann, T. Vinatier, and W. Hillert, “Numerical design of a compact TE11-to-TM01 mode converter for THz-driven electron acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA113, pp. 2916-2919.
- O. Xiao et al., “Design and test of a S band TW buncher for the injector linac of HEPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC35, pp. 140-141.
- O. Novotny, “Low-Energy Electron Cooling at the Cryogenic Storage Ring”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper MOPPM1R2, unpublished.
- A. P. Kuznetsov, P. V. Sasorov, and D. A. Sobur, “Plasma lens investigation for the heavy ion accelerator AT ITEP”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOHP16, pp. XX-XX.
- S. F. Rey et al., “Experience with Beam Transfer Function Measurements for Setting-up the Stochastic Cooling System in the CERN Anti-Proton Decelerator (AD)”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP22, pp. 102-105.
- N. Bruchon, I. Karpov, N. Madysa, G. Papotti, and D. Quartullo, “Operational Tool for Automatic Setup of Controlled Longitudinal Emittance Blow-Up in the CERN SPS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP086, pp. 723-728.
- A. Perillo Marcone et al., “Beam absorbing material candidates for primary collimators for FCC-ee”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL060, unpublished.
- T. Weiland et al., “Massively Parallel Wake Field Computations in Long Accelerator Structures”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP010, pp. 52-54.
- E. Ferrari et al., “The ACHIP Experimental Chambers at PSI”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 336-339.
- N. Stilin et al., “Design and commissioning of a new SRF cavity for a conduction-cooled system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA143, pp. 2987-2990.
- H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
- J. Bernardini et al., “Strategies for mitigating residual magnetic field effect on pre-production PIP-II SSR2 cryomodule performance”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 187-190.
- H. Shoaee and R. C. Sass, “CATER: An Online Problem Tracking Facility for SLC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1946-1949.
Back to search