Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Favourites
For Word
[n] R. B. Overton et al., “Recent Operation of the ORELA Electron LINAC at ORNL for Neutron Cross-Section Research”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP021, pp. 79-81.
[n] L. Maunoury et al., “SPIRAL1: A Versatile User Facility”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 29-33. doi:10.18429/JACoW-ECRIS2018-MOC4
[n] C. Deibele, S. Assadi, M. J. Schulte, and Z. P. Xie, “Status and Implementation of a Wideband Feedback System for e-p Instabilities in the SNS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF09, pp. 462-465.
[n] Y. Z. Shao, G. E. Lawler, B. Naranjo, and J. B. Rosenzweig, “Tapered Modular Quadrupole Magnet to Reduce Higher-Order Optical Aberrations”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4429-4431. doi:10.18429/JACoW-IPAC2021-THPAB328
[n] J.-L. Mi et al., “SNS Extraction Kicker System and First Article BPFN Test”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE068, pp. 2652-2654.
[n] H. Podlech et al., “RIA RFQ Beam Dynamic Studies”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE064, pp. 945-947.
[n] G. O. Bolme et al., “Sparking Rate Studies and Spark Breakdown Protection Studies with a CW Radio Frequency Quadrupole Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA158, pp. 1447-1449.
[n] R. Li and J. J. Bisognano, “A Strong-Strong Simulation on the Beam-Beam Effect in a Linac/Ring B-Factory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3473-3476.
[n] A. Galdi et al., “Towards the Optimization Of Photocathode Properties Via Surface Science Techniques: A Study On Cs3Sb Thin Film Growth”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 224-227. doi:10.18429/JACoW-NAPAC2019-MOPLH24
[n] J. Bae, I. V. Bazarov, L. Cultrera, A. Galdi, F. Ikponmwen, and J. M. Maxson, “Enhanced Robustness of GaAs-Based Photocathodes Activation by Cs, Sb, and O2”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 210-212. doi:10.18429/JACoW-NAPAC2019-MOPLH17
[n] C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2240-2243. doi:10.18429/JACoW-IPAC2024-WEPG22
[n] T. A. Welton, “Factors Affecting Beam Quality”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D04, pp. 192-198.
[n] A. Galdi et al., “Understanding the Growth Dynamics Cs-Sb Thin Films via In-Situ Characterization Techniques: Towards Epitaxial Alkali Antimonide Photocathodes”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2979-2982. doi:10.18429/JACoW-IPAC2021-WEPAB157
[n] R. F. Koontz, S. Gold, R. Cassel, D. Ficklin, K. Harris, and J. de Lamare, “Pulse Modulator Developments in Support of Klystron Testing at SLAC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1318-1321.
[n] P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2291-2295. doi:10.18429/JACoW-IPAC2019-WEZZPLS2
[n] O. B. Malyshev and R. Valizadeh, “Electron Stimulated Desorption From Titanium Tube”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2850-2853. doi:10.18429/JACoW-IPAC2022-THPOTK038
[n] J. Krzywinski et al., “Q-Switching of X-Ray Optical Cavities by Using Boron Doped Buried Layer Under a Surface of a Diamond Crystal”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 122-125. doi:10.18429/JACoW-FEL2019-TUP033
[n] J. M. Byrd, W.-H. Cheng, and F. Zimmermann, “Nonlinear Longitudinal Dynamics Studies at the ALS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V011, pp. 1514-1516.
[n] R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1475-1478. doi:10.18429/JACoW-IPAC2022-TUPOMS029
[n] K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2939-2942.
[n] R. Dölling, “Simulation of Oscillating Arm Wire Monitor Mechanics Driven by a Stepper Motor”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 373-376. doi:10.18429/JACoW-IBIC2023-WEP018
[n] S. Schreiber et al., “Experience with the Photoinjector Laser at FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH017, pp. 590-593.
[n] M. Lu et al., “The optimization of the bronze-method Nb3Sn coatings on Cu substrates”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3046-3048. doi:10.18429/JACoW-IPAC2023-WEPA171
[n] K. P. Mondal et al., “Cesium telluride photocathodes: PLD assisted epitaxial growth”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP018, unpublished.
[n] S. Zeeshan, D. Bazyl, M. Krasilnikov, X. Li, and I. Zagorodnov, “Simulation studies of SRF CW photoinjector brightness optimization for different RF gun gradients and photocathode laser pulse shapes”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2070, unpublished.
[n] C. Benjamin, H. Churn, L. Jones, R. Valizadeh, and T. Noakes, “Rubidium telluride photocathodes for high quantum efficiency and low mean transverse energy accelerator applications”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2137-2139. doi:10.18429/JACoW-IPAC2024-WEPC71
[n] F. Pradal, R. Kersevan, M. Bernardini, F. Giacuzzo, F. Daclon, and J. Miertusova, “ELETTRA Vacuum System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3842-3845.
[n] W. Lin et al., “Improve beam brightness with bayesian optimization at the AGS booster injection at BNL”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 157-160. doi:10.18429/JACoW-NAPAC2025-MOP050
[n] F. Lemagnen et al., “New Metallic Stable Ion Beams for GANIL”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 54-56. doi:10.18429/JACoW-ECRIS2020-MOZZO04
[n] O. Bajeat, C. Barue, M. Dubois, F. Lemagnen, and M. Michel, “A New Resistive High Temperature Oven for Metallic Beams Production”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper MOZZO05, unpublished.
[n] J. O. Hill, L. R. Dalesio, and D. M. Kerstiens, “A Virtual Control Panel Configuration Tool for the X-Window System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 468-470. doi:10.18429/JACoW-ICALEPCS1991-S13MMI06
[n] C. G. Maiano et al., “Horizontal RF Test of a Fully Equipped 3.9 GHz Cavity for the European XFEL in the DESY AMTF”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB076, pp. 301-305.
[n] K. Halbach, S. Marks, E. Hoyer, D. Humphries, B. Kincaid, and R. Schlueter, “Modeling and Measurement of the ALS U5 Undulator End Magnetic Structures”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1581-1584.
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] Z. Conway et al., “SRF technology challenges for the electron ion collider”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper FRA02, unpublished.
[n] R. Li, “The Impact of Coherent Synchrotron Radiation on the Beam Transport of Short Bunches”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAL3, pp. 118-122.
[n] E. Jensen et al., “Plans for an ERL Test Facility at CERN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP031, pp. 905-908.
[n] M. Dubois et al., “MONOBOB II : Latest Results of Monocharged Ion Source for SPIRAL2 Project”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT013, pp. 64-66.
For LaTeX
Use Complete Form
For BibTeX
References
- R. B. Overton et al., “Recent Operation of the ORELA Electron LINAC at ORNL for Neutron Cross-Section Research”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP021, pp. 79-81.
- L. Maunoury et al., “SPIRAL1: A Versatile User Facility”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 29-33.
- C. Deibele, S. Assadi, M. J. Schulte, and Z. P. Xie, “Status and Implementation of a Wideband Feedback System for e-p Instabilities in the SNS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF09, pp. 462-465.
- Y. Z. Shao, G. E. Lawler, B. Naranjo, and J. B. Rosenzweig, “Tapered Modular Quadrupole Magnet to Reduce Higher-Order Optical Aberrations”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4429-4431.
- J.-L. Mi et al., “SNS Extraction Kicker System and First Article BPFN Test”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE068, pp. 2652-2654.
- H. Podlech et al., “RIA RFQ Beam Dynamic Studies”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE064, pp. 945-947.
- G. O. Bolme et al., “Sparking Rate Studies and Spark Breakdown Protection Studies with a CW Radio Frequency Quadrupole Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA158, pp. 1447-1449.
- R. Li and J. J. Bisognano, “A Strong-Strong Simulation on the Beam-Beam Effect in a Linac/Ring B-Factory”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3473-3476.
- A. Galdi et al., “Towards the Optimization Of Photocathode Properties Via Surface Science Techniques: A Study On Cs3Sb Thin Film Growth”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 224-227.
- J. Bae, I. V. Bazarov, L. Cultrera, A. Galdi, F. Ikponmwen, and J. M. Maxson, “Enhanced Robustness of GaAs-Based Photocathodes Activation by Cs, Sb, and O2”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 210-212.
- C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG22, pp. 2240-2243.
- T. A. Welton, “Factors Affecting Beam Quality”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D04, pp. 192-198.
- A. Galdi et al., “Understanding the Growth Dynamics Cs-Sb Thin Films via In-Situ Characterization Techniques: Towards Epitaxial Alkali Antimonide Photocathodes”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2979-2982.
- R. F. Koontz, S. Gold, R. Cassel, D. Ficklin, K. Harris, and J. de Lamare, “Pulse Modulator Developments in Support of Klystron Testing at SLAC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1318-1321.
- P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2291-2295.
- O. B. Malyshev and R. Valizadeh, “Electron Stimulated Desorption From Titanium Tube”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2850-2853.
- J. Krzywinski et al., “Q-Switching of X-Ray Optical Cavities by Using Boron Doped Buried Layer Under a Surface of a Diamond Crystal”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 122-125.
- J. M. Byrd, W.-H. Cheng, and F. Zimmermann, “Nonlinear Longitudinal Dynamics Studies at the ALS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V011, pp. 1514-1516.
- R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1475-1478.
- K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2939-2942.
- R. Dölling, “Simulation of Oscillating Arm Wire Monitor Mechanics Driven by a Stepper Motor”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP018, pp. 373-376.
- S. Schreiber et al., “Experience with the Photoinjector Laser at FLASH”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH017, pp. 590-593.
- M. Lu et al., “The optimization of the bronze-method Nb3Sn coatings on Cu substrates”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA171, pp. 3046-3048.
- K. P. Mondal et al., “Cesium telluride photocathodes: PLD assisted epitaxial growth”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THP018, unpublished.
- S. Zeeshan, D. Bazyl, M. Krasilnikov, X. Li, and I. Zagorodnov, “Simulation studies of SRF CW photoinjector brightness optimization for different RF gun gradients and photocathode laser pulse shapes”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2070, this conference.
- C. Benjamin, H. Churn, L. Jones, R. Valizadeh, and T. Noakes, “Rubidium telluride photocathodes for high quantum efficiency and low mean transverse energy accelerator applications”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC71, pp. 2137-2139.
- F. Pradal, R. Kersevan, M. Bernardini, F. Giacuzzo, F. Daclon, and J. Miertusova, “ELETTRA Vacuum System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3842-3845.
- W. Lin et al., “Improve beam brightness with bayesian optimization at the AGS booster injection at BNL”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 157-160.
- F. Lemagnen et al., “New Metallic Stable Ion Beams for GANIL”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO04, pp. 54-56.
- O. Bajeat, C. Barue, M. Dubois, F. Lemagnen, and M. Michel, “A New Resistive High Temperature Oven for Metallic Beams Production”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO05, unpublished.
- J. O. Hill, L. R. Dalesio, and D. M. Kerstiens, “A Virtual Control Panel Configuration Tool for the X-Window System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI06, pp. 468-470.
- C. G. Maiano et al., “Horizontal RF Test of a Fully Equipped 3.9 GHz Cavity for the European XFEL in the DESY AMTF”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB076, pp. 301-305.
- K. Halbach, S. Marks, E. Hoyer, D. Humphries, B. Kincaid, and R. Schlueter, “Modeling and Measurement of the ALS U5 Undulator End Magnetic Structures”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1581-1584.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- Z. Conway et al., “SRF technology challenges for the electron ion collider”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper FRA02, unpublished.
- R. Li, “The Impact of Coherent Synchrotron Radiation on the Beam Transport of Short Bunches”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAL3, pp. 118-122.
- E. Jensen et al., “Plans for an ERL Test Facility at CERN”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP031, pp. 905-908.
- M. Dubois et al., “MONOBOB II : Latest Results of Monocharged Ion Source for SPIRAL2 Project”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT013, pp. 64-66.
Back to search