JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. A. Kahn and R. C. Gupta, “Radiation Tolerant Multipole Correction Coils for FRIB Quadrupoles”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA25, pp. 1283-1285. 
[n]	S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n]	G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717. 
[n]	P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX. 
[n]	J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892. 
[n]	H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051. 
[n]	D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750. 
[n]	M. Nordby, M. Fong, and J. Hodgson, “Synchrotron Radiation Masking in the PEP-II High-Engery Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2500-2503. 
[n]	J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340. 
[n]	G. Hemmie, “Status of the DESY II Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 851-854. 
[n]	A-M. Valente-Feliciano et al., “RF and Structural Characterization of New SRF Films”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO084, pp. 431-435. 
[n]	S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2185-2188. 
[n]	A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n]	P. Thieberger et al., “Proposed Scattered Electron Detector System as One of the Beam Overlap Diagnostic Tools for the New RHIC Electron Lens”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP209, pp. 489-491. 
[n]	F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786. 
[n]	K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957. 
[n]	R. J. Abrams, M. A. Cummings, V. G. Dudnikov, R. P. Johnson, and M. Popovic, “Residual-Gas Beam Profile Monitors for Intense Beams in Transfer Lines”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 469-472. doi:10.18429/JACoW-IPAC2017-MOPAB144
[n]	S. Henderson et al., “Improvements to the CESR Injector and Injection Process”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH117, pp. 3505-3507. 
[n]	A. Fukasawa et al., “X-Band Thermionic Cathode RF Gun at UTNL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP019, pp. 1646-1648. 
[n]	S. Zelazny et al., “Multi-Device Knob Utility for LCLS at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP023, pp. 134-136. 
[n]	A. V. Shemyakin et al., “Design of 162-MHz CW Bunch-by-Bunch Chopper and Prototype Testing Results”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 428-433. doi:10.18429/JACoW-HB2018-THP1WC03
[n]	T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84. 
[n]	R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Mu*STAR Accelerator-Driven Subcritical Reactors Burning Spent Nuclear Fuel at Light-Water-Reactor Sites”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 524-526. doi:10.18429/JACoW-IPAC2018-MOPML053
[n]	G. P. A. Berg, W. Fox, D. L. Friesel, and T. Rinckel, “3D Design, Contruction, and Field Analysis of CIS Main Dipole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P035, pp. 3303-3305. 
[n]	S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531. 
[n]	S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365. 
[n]	T. Nakamoto et al., “Development of Superconducting Combined Function Magnets for the Proton Transport Line for the J-PARC Neutrino Experiments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAA006, pp. 495-499. 
[n]	V. G. Dudnikov, M. A. Cummings, R. P. Johnson, and A. V. Sy, “Polarized Deuteron Negative Ion Source for Nuclear Physics Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4665-4667. doi:10.18429/JACoW-IPAC2018-THPML009
[n]	M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3729-3731. doi:10.18429/JACoW-IPAC2018-THPAL040
[n]	G. Hemmie and M. Leneke, “Reduction of the Horizontal Antidamping in the DESY Electron Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2546-2549. 
[n]	A. Schempp et al., “Development of a Variable Energy RFQ for Cluster Acceleration”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3053-3056. 
[n]	Y. Yonemura et al., “Commissioning of 150MeV FFAG Synchronisation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT066, pp. 2643-2645. 
[n]	A. Febel and G. Hemmie, “PIA, the Positron Intensity Accumulator for the PETRA Injection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3244-3246. 
[n]	G. Hemmie, “Status Report on the DESY II Synchrotron, The DESY II Collaboration”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1641-1644. 
[n]	S. Adam, M. Humbel, and W. Joho, “Beam Dynamical Aspects of the SIN Injector II”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B01, pp. 20-23. 
[n]	T. Yan, “Computation of Nonlinear One-Turn Maps from Measurement with Model-Independent Analysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL4, pp. 363-365. 
[n]	P. A. Schmelzbach et al., “1.8 MW Upgrade of the PSI Proton Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEOBPA03, pp. 1879-1881. 
[n]	D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478. 
[n]	A. H. Regan, T. S. Rohlev, Y. M. Wang, M. Prokop, D. Thomson, and S. I. Kwon, “Design of the SNS Normalconducting LINAC RF Control System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC17, pp. 534-536. 
[n]	G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148. 
[n]	P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406. 
[n]	Y. Hori, S. Ueda, M. Kobayashi, T. Kobari, and M. Matumoto, “Surface Treatments and Photodesorption of Oxygen Free Copper Used in an Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3903-3906. 
[n]	R. Keller, “Final Analysis of the ALS Lattice Magnet Data”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2811-2814. 
[n]	A. D. Casey et al., “Modernization Challenges for the IT Infrastructure  at the National Ignition Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 867. doi:10.18429/JACoW-ICALEPCS2019-WEAPP02
[n]	S. Adam, “New Proofs for Old Facts in Acceleration Theory”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-16, pp. 431-433. 
[n]	J. F. O, J. F. Power, J. Ledford, J. D. Gilpatrick, M. Stettler, and J. Sage, “Design and Development of the LEDA Slow Wire Scanner Profile Measurement”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4059, pp. 186-188. 
[n]	D. Xu, C. Montag, F. Willeke, M. Blaskiewicz, and Y. Luo, “Advancing electron injection dynamics and mitigation approaches in the Electron-Ion Collider’s swap-out injection scheme”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 230-233. doi:10.18429/JACoW-IPAC2024-MOPC72
[n]	Y. Ueda et al., “Beam lifetime evaluation based on simulation of a vacuum pressure distribution for the SPring-8-II commissioning strategy through vacuum conditioning”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7690, unpublished. 
[n]	A. Dixon, P. Williams, S. Thorin, and T. Charles, “The MAX-IV linac with variable bunch compressors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3272-3275. doi:10.18429/JACoW-IPAC2023-WEPL073
[n]	R. Keller, “Survey and Alignment Data Analysis for the ALS Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2910-2913. 
[n]	M. Kobayashi, “Symmetries and Einstein”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOPB002, pp. 217-219. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search