JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. Kamerdzhiev et al., “Commissioning of the 2MeV Electron Cooler for COSY / HESR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD006, pp. 379-381. 
[n]	H. Jang, H. J. Kim, J. G. Hwang, and B. H. Oh, “Beam Dynamics Study for RAON Superconducting Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP080, pp. 239-241. 
[n]	C. Y. Yoshikawa et al., “Optimization of the Target Subsystem for the New g-2 Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD044, pp. 460-462. 
[n]	R. J. Abrams et al., “Conceptual Design of a Positron-annihilation System for Generation of Quasi-monochromatic Gamma Rays”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD033, pp. 1476-1478. 
[n]	A. E. Wheelhouse et al., “UK Industrial Development of Manufacturing Techniques for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2586-2588. doi:10.18429/JACoW-IPAC2014-WEPRI047
[n]	A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890. 
[n]	A. Pathak, “Linac_Gen: integrating machine learning and particle-in-cell methods for enhanced beam dynamics at Fermilab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1695-1697. doi:10.18429/JACoW-IPAC2024-TUPS28
[n]	M. Kireeff Covo, “Nondestructive Beam Current Monitor for the 88-inch Cyclotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3738-3740. doi:10.18429/JACoW-IPAC2014-THPME195
[n]	D. V. Neuffer, K. Yonehara, C. M. Ankenbrandt, and C. Y. Yoshikawa, “Use of Helical Transport Channels for Bunch Recombination”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC034, pp. 205-207. 
[n]	I. V. Leitao, “Development, Validation and Application of a Novel Method for Estimating the Thermal Conductance of Critical Interfaces in the Jaws of the LHC Collimation System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI060, pp. 3430-3432. 
[n]	T. T. Thakker and S. P. Jamison, “Effect of Active Fibre Stabilization on Group and Phase Delay”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD39, pp. 329-331. 
[n]	M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2872-2877. doi:10.18429/JACoW-IPAC2018-THXGBD1
[n]	V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221. 
[n]	M. M. Paoluzzi et al., “Studies on a Wideband, Solid-state Driven RF System for the CERN PS Booster”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP011, pp. 3749-3751. 
[n]	D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 968-972. doi:10.18429/JACoW-SRF2019-THP048
[n]	D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX. 
[n]	F. Jackson et al., “Electron Beam Dynamics in the ALICE IR-FEL Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD42, pp. 464-467. 
[n]	Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-MEDSI2016-TUPE44
[n]	R. L. Stringall, J. V. Lebacqz, and D. L. Russell, “Klystrons for Accelerator Improvements”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 369-373. 
[n]	J. V. Lebacqz, “High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 86-96. 
[n]	P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844. 
[n]	W. R. Flavell, “Functional Materials Development using Accelerator-based Light Sources: Current Capabilities and Future Prospects”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEIC04, pp. 2156-2160. 
[n]	P. Nama et al., “Effective thermal load mitigation in cERL injector coupler through warm section modification”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 778-781. doi:10.18429/JACoW-LINAC2024-THPB073
[n]	M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773. 
[n]	J. W. McKenzie et al., “Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2983-2985. doi:10.18429/JACoW-IPAC2014-THPRO051
[n]	J. A. Rodriguez et al., “30 GHz High-Gradient Accelerating Structure Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC01, pp. 3818-3820. 
[n]	A. E. Wheelhouse et al., “Commissioning of the Transverse Deflecting Cavity on VELA at Daresbury Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3239-3241. doi:10.18429/JACoW-IPAC2015-WEPHA054
[n]	R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4307-4310. doi:10.18429/JACoW-IPAC2017-THPIK094
[n]	J. V. Lebacqz, “RF Sources Developments”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-1, pp. 327-335. 
[n]	B. Walasek-Hoehne et al., “CUPID: New System for Scintillating Screen Based Diagnostics”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD06, pp. 417-420. 
[n]	W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557. 
[n]	J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 83-86. doi:10.18429/JACoW-MEDSI2016-MOPE32
[n]	C. A. Preissner, H. Cease, J. T. Collins, Z. Liu, J. Nudell, and B. N. Jensen, “Nostradamus and the Synchrotron Engineer: Key Aspects of Predicting Accelerator Structural Response”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 272-276. doi:10.18429/JACoW-MEDSI2016-WEBA01
[n]	V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1272-1275. doi:10.18429/JACoW-IPAC2018-TUPMF012
[n]	L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3848-3851. doi:10.18429/JACoW-IPAC2018-THPAL084
[n]	J. V. Lebacqz, “Status Report on Klystron Improvements”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1324-1328. 
[n]	W. C. Struven, “Experience with Touch Panel Control at SLAC”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 636-638. 
[n]	J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-MEDSI2016-MOPE34
[n]	J. Lee, B. H. Oh, and M. Yoon, “Generating a Single-Spike SASE Pulse in the Soft X-Ray Regime by Velocity Bunching”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 233-236. doi:10.18429/JACoW-FEL2015-MOP081
[n]	A. Dallocchio, G. Arnau-Izquierdo, K. Artoos, and A. Bertarelli, “Advanced Materials for Future Phase II LHC Collimators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP016, pp. 2814-2816. 
[n]	M. A. Allen et al., “Design and Operation of the SPEAR II RF System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1269-1273. 
[n]	A. Kalinin, S. P. Jamison, T. T. Thakker, R. Apsimon, G. Burt, and A. C. Dexter, “Design and Simulation Studies of the Novel Beam Arrival Monitor Pickup at Daresbury Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 334-336. doi:10.18429/JACoW-IPAC2016-MOPMR038
[n]	M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2958-2961. 
[n]	T.-Y. Lee and B. H. Oh, “Possible Suppression of Head-Tail Instability by a Feedback Kicker for a Light Source Without Any Sextupole”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2738-2740. doi:10.18429/JACoW-IPAC2017-WEPAB069
[n]	J. J. Ko et al., “X-ray Pinhole Camera in the Diagnostics Beamlime BL7B at PLS-II”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 519-522. doi:10.18429/JACoW-IBIC2018-WEPC17
[n]	M. Meena, A. Pathak, and R. Varma, “RF Design, Optimization and Multiphysics Study of a β = 1, 1.3 GHz Single Cell Accelerating Cavity for High-Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 41-43. doi:10.18429/JACoW-LINAC2022-MOPOJO08
[n]	P. Kumar, A. Pathak, and R. Varma, “Design & Multiphysics Analysis of Three-cell, 1.3 GHz Superconducting RF Cavity for Electron Beam Accelerator to Treat Wastewater”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 809-811. doi:10.18429/JACoW-LINAC2022-THPOGE03
[n]	M. Schwickert and A. Reiter, “Beam Diagnostics for Commissioning the HEBT and Gantry Sections of the HIT Medical Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC095, pp. 1281-1283. 
[n]	S.-R. Huh, D. S. Chang, C. K. Hwang, J.-T. Jin, S. K. Lee, and B. H. Oh, “Present Status of the Daejeon Ion Accelerator Complex at KAERI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1482-1484. doi:10.18429/JACoW-ICALEPCS2017-THPHA051
[n]	C. Kim, A. Jackson, and A. Warwick, “Beam Lifetime and Beam Brightness in ALS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA03, pp. 198-200. 
[n]	P. Nama, A. Pathak, and R. Varma, “Design and Optimization of a 100 kV DC Thermionic Electron Gun and Transport Channel for a 1.3 GHz High Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 65-68. doi:10.18429/JACoW-LINAC2022-MOPOJO17
[n]	A. Aksoy, A. Malyzhenkov, A. Latina, P. Korysko, R. Corsini, and W. Farabolini, “Application of beam-based alignment to the CLEAR facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3166-3169. doi:10.18429/JACoW-IPAC2023-WEPL025

For LaTeX

Use Complete Form

For BibTeX

References

Back to search