Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Polyanskii et al., “SRF Cavity and Materials Ramp;D at Fermilab”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP82, pp. 213-215.
[n] C. Takahashi et al., “Implementation of Model Predictive Control for Slow Orbit Feedback Control in MAX IV Accelerators Using PyTango Framework”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 116-122. doi:10.18429/JACoW-ICALEPCS2023-MO3AO02
[n] P. Chauveau, S. Damoy, M. Dubois, L. Maunoury, and J. Angot, “Experimental application of a TWTA to the SPIRAL1 charge breeder”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper THT4AUCO10, unpublished.
[n] H. Huttunen et al., “Optics design of a compact helium synchrotron for advanced cancer therapy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2991-2994. doi:10.18429/JACoW-IPAC2024-THPC13
[n] H. T. Edwards et al., “The Flat Beam Experiment at the FNAL Photoinjector”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB13, pp. 122-124.
[n] K. P. Wootton et al., “Electron Beam at the Advanced Photon Source Linac Extension Area Beamline”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 368-372. doi:10.18429/JACoW-IBIC2023-WEP017
[n] S. R. Jang et al., “Development status of solid-state switches for thyratron replacement”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB082, unpublished.
[n] C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2239-2241. doi:10.18429/JACoW-IPAC2021-TUPAB318
[n] C. Böhme, C. Deliege, V. Kamerdzhiev, R. Modic, M. Simon, and M. Thelen, “Challenges of the COSY Synchrotron Control System Upgrade to EPICS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 561-564. doi:10.18429/JACoW-ICALEPCS2023-TUPDP028
[n] F. Dos Santos Pedrosa, A. Uluwita, C. Bernard, G. Georgiev, and N. Mornand, “Injectors de-cabling project”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS51, unpublished.
[n] S. Yamin et al., “Beam based alignment of focusing solenoids at ARES”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1709-1712. doi:10.18429/JACoW-IPAC2023-TUPA174
[n] T. Batten, “Closing of IBIC 2023”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I05, unpublished.
[n] R. A. Rimmer and J. N. Corlett, “Impedance Measurements of Components for the ALS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3411-3414.
[n] K. Galaydych, I. N. Onishchenko, and G. V. Sotnikov, “Wakefields and Transverse Bunch Dynamics Studies of a Plasma-Dielectric Accelerating Structure”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 542-545. doi:10.18429/JACoW-IPAC2021-MOPAB156
[n] F. de Sá, G. Gomes, I. Carvalho de Almeida, L. Liu, M. Alves, and X. Resende, “Broadband impedance induced heating proxy for operation at higher total current at SIRIUS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3090-3093. doi:10.18429/JACoW-IPAC2024-THPC44
[n] G. Ricci et al., “Real time crystal collimation monitoring at the CERN Large Hadron Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1750-1753. doi:10.18429/JACoW-IPAC2024-TUPS42
[n] Z. Qiao et al., “Surface Twist Characterization and Compensation of an Elliptically Bent Hard X-Ray Mirror”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 99. doi:10.18429/JACoW-MEDSI2020-TUOA01
[n] H. Zen, K. Tanaka, Y. Zhao, and H. Ohgaki, “Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL046, unpublished.
[n] O. Utke, S. Chaichuay, S. Klinkhieo, S. Pongampai, K. Sittisard, and S. Srichan, “Design of Magnet Girder System for Siam Photon Source II”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 138. doi:10.18429/JACoW-MEDSI2020-TUPA10
[n] Y. L. Luo et al., “Development of a 166-MHz 260-kW Solid-State Power Amplifier for High Energy Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2315-2317. doi:10.18429/JACoW-IPAC2021-TUPAB347
[n] A. Díaz Rosales, M. Di Castro, and H. Gamper, “Control Design Optimisations of Robots for the Maintenance and Inspection of Particle Accelerators”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 153-159. doi:10.18429/JACoW-ICALEPCS2023-MO3AO07
[n] W. Gu, H. Chen, J. Shi, and H. Zha, “X-band electron linear accelerator design for intraoperative radiotherapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1288-1290. doi:10.18429/JACoW-IPAC2023-MOPM140
[n] R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3093-3096.
[n] K. M. Chen et al., “Beam Orbit Shift Due to BPM Thermal Deformation Using Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2577-2579. doi:10.18429/JACoW-IPAC2022-THPOPT008
[n] Y. Peng, J. PAN, and J. X. Zhou, “Study on magnets sorting for the HEPS booster”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1088-1090. doi:10.18429/JACoW-IPAC2023-MOPM044
[n] A. Leiva Genre et al., “Simulation of tapered co-propagating structures for dielectric laser accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1488-1491. doi:10.18429/JACoW-IPAC2023-TUPA071
[n] Q. Tian et al., “The laser system of very compact inverse Compton scattering γ-ray source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG73, unpublished.
[n] Y. Iwashita, C. M. Spencer, M. Kumada, T. Mihara, A. Evgeny, and E. Sugiyama, “Superstrong Adjustable Permanent Magnet for a Linear Collider Final Focus”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP81, pp. 462-464.
[n] F. Liu et al., “Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2549-2552. doi:10.18429/JACoW-IPAC2023-TUPM135
[n] M. Fedorov et al., “In the Midst of Fusion Ignition: A Look at the State of the National Ignition Facility Control and Information Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 973-978. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO02
[n] G. Pile et al., “Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE07, pp. 983-985.
[n] D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2983-2986. doi:10.18429/JACoW-IPAC2023-WEPA141
[n] U. Pudasaini, S. Cheban, and G. V. Eremeev, “First Results from Nanoindentation of Vapor Diffused Nb₃Sn Films on Nb”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 888-892. doi:10.18429/JACoW-SRF2023-WEPWB126
[n] S. Dong, B. Zhang, Y. Yang, and G. Feng, “Research on design of a novel permanent quadrupole magnet”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1552-1555. doi:10.18429/JACoW-IPAC2024-TUPR55
[n] J. M. Alvarez, C. Colldelram, N. Gonzalez, J. Juanhuix, J. Nicolas, and I. Sics, “Design of Monochromatic and White Beam Fluorescence Screen Monitors for XAIRA Beamline at the ALBA Synchrotron”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 249. doi:10.18429/JACoW-MEDSI2020-WEPA11
[n] F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 357. doi:10.18429/JACoW-MEDSI2020-THOB02
[n] N. Bazin, C. Simon, G. Devanz, H. Jenhani, R. Cubizolles, and S. Berry, “Status of the CEA contribution to the PIP-II linear accelerator”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 648-651. doi:10.18429/JACoW-LINAC2024-THPB010
[n] P. S. Lakshmy, “Studies on electron energy distributions in High Temperature Superconducting ECR Ion Source, PKDELIS at IUAC”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper THT6AUCO18, unpublished.
[n] L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
[n] D. K. Liu, W. X. Cheng, and Y. B. Leng, “SSRF TIMING SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP035, pp. XX-XX.
[n] C. Zhang, A. Bartnik, C. Pennington, E. Echeverria, and J. Maxson, “Reconstructing 4D source momentum space via aperture scans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4595-4597. doi:10.18429/JACoW-IPAC2023-THPL071
[n] Q. Zhao et al., “Design and Test of the Triple-Harmonic Buncher for the NSCL Reaccelerator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP069, pp. 948-950.
[n] M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1703-1706. doi:10.18429/JACoW-IPAC2022-WEPOST012
For LaTeX
Use Complete Form
For BibTeX
References
- A. Polyanskii et al., “SRF Cavity and Materials Ramp;D at Fermilab”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP82, pp. 213-215.
- C. Takahashi et al., “Implementation of Model Predictive Control for Slow Orbit Feedback Control in MAX IV Accelerators Using PyTango Framework”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3AO02, pp. 116-122.
- P. Chauveau, S. Damoy, M. Dubois, L. Maunoury, and J. Angot, “Experimental application of a TWTA to the SPIRAL1 charge breeder”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper THT4AUCO10, unpublished.
- H. Huttunen et al., “Optics design of a compact helium synchrotron for advanced cancer therapy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC13, pp. 2991-2994.
- H. T. Edwards et al., “The Flat Beam Experiment at the FNAL Photoinjector”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB13, pp. 122-124.
- K. P. Wootton et al., “Electron Beam at the Advanced Photon Source Linac Extension Area Beamline”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP017, pp. 368-372.
- S. R. Jang et al., “Development status of solid-state switches for thyratron replacement”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB082, unpublished.
- C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2239-2241.
- C. Böhme, C. Deliege, V. Kamerdzhiev, R. Modic, M. Simon, and M. Thelen, “Challenges of the COSY Synchrotron Control System Upgrade to EPICS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP028, pp. 561-564.
- F. Dos Santos Pedrosa, A. Uluwita, C. Bernard, G. Georgiev, and N. Mornand, “Injectors de-cabling project”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS51, unpublished.
- S. Yamin et al., “Beam based alignment of focusing solenoids at ARES”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA174, pp. 1709-1712.
- T. Batten, “Closing of IBIC 2023”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TH2I05, unpublished.
- R. A. Rimmer and J. N. Corlett, “Impedance Measurements of Components for the ALS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3411-3414.
- K. Galaydych, I. N. Onishchenko, and G. V. Sotnikov, “Wakefields and Transverse Bunch Dynamics Studies of a Plasma-Dielectric Accelerating Structure”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 542-545.
- F. de Sá, G. Gomes, I. Carvalho de Almeida, L. Liu, M. Alves, and X. Resende, “Broadband impedance induced heating proxy for operation at higher total current at SIRIUS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC44, pp. 3090-3093.
- G. Ricci et al., “Real time crystal collimation monitoring at the CERN Large Hadron Collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS42, pp. 1750-1753.
- Z. Qiao et al., “Surface Twist Characterization and Compensation of an Elliptically Bent Hard X-Ray Mirror”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 99.
- H. Zen, K. Tanaka, Y. Zhao, and H. Ohgaki, “Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL046, unpublished.
- O. Utke, S. Chaichuay, S. Klinkhieo, S. Pongampai, K. Sittisard, and S. Srichan, “Design of Magnet Girder System for Siam Photon Source II”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 138.
- Y. L. Luo et al., “Development of a 166-MHz 260-kW Solid-State Power Amplifier for High Energy Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2315-2317.
- A. Díaz Rosales, M. Di Castro, and H. Gamper, “Control Design Optimisations of Robots for the Maintenance and Inspection of Particle Accelerators”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3AO07, pp. 153-159.
- W. Gu, H. Chen, J. Shi, and H. Zha, “X-band electron linear accelerator design for intraoperative radiotherapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM140, pp. 1288-1290.
- R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3093-3096.
- K. M. Chen et al., “Beam Orbit Shift Due to BPM Thermal Deformation Using Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2577-2579.
- Y. Peng, J. PAN, and J. X. Zhou, “Study on magnets sorting for the HEPS booster”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM044, pp. 1088-1090.
- A. Leiva Genre et al., “Simulation of tapered co-propagating structures for dielectric laser accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA071, pp. 1488-1491.
- Q. Tian et al., “The laser system of very compact inverse Compton scattering γ-ray source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG73, unpublished.
- Y. Iwashita, C. M. Spencer, M. Kumada, T. Mihara, A. Evgeny, and E. Sugiyama, “Superstrong Adjustable Permanent Magnet for a Linear Collider Final Focus”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP81, pp. 462-464.
- F. Liu et al., “Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM135, pp. 2549-2552.
- M. Fedorov et al., “In the Midst of Fusion Ignition: A Look at the State of the National Ignition Facility Control and Information Systems”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE2BCO02, pp. 973-978.
- G. Pile et al., “Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE07, pp. 983-985.
- D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA141, pp. 2983-2986.
- U. Pudasaini, S. Cheban, and G. V. Eremeev, “First Results from Nanoindentation of Vapor Diffused Nb₃Sn Films on Nb”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB126, pp. 888-892.
- S. Dong, B. Zhang, Y. Yang, and G. Feng, “Research on design of a novel permanent quadrupole magnet”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR55, pp. 1552-1555.
- J. M. Alvarez, C. Colldelram, N. Gonzalez, J. Juanhuix, J. Nicolas, and I. Sics, “Design of Monochromatic and White Beam Fluorescence Screen Monitors for XAIRA Beamline at the ALBA Synchrotron”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 249.
- F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 357.
- N. Bazin, C. Simon, G. Devanz, H. Jenhani, R. Cubizolles, and S. Berry, “Status of the CEA contribution to the PIP-II linear accelerator”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 648-651.
- P. S. Lakshmy, “Studies on electron energy distributions in High Temperature Superconducting ECR Ion Source, PKDELIS at IUAC”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper THT6AUCO18, unpublished.
- L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA134, pp. 2976-2979.
- D. K. Liu, W. X. Cheng, and Y. B. Leng, “SSRF TIMING SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP035, pp. XX-XX.
- C. Zhang, A. Bartnik, C. Pennington, E. Echeverria, and J. Maxson, “Reconstructing 4D source momentum space via aperture scans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL071, pp. 4595-4597.
- Q. Zhao et al., “Design and Test of the Triple-Harmonic Buncher for the NSCL Reaccelerator”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP069, pp. 948-950.
- M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1703-1706.
Back to search