Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Favourites
For Word
[n] I. J. Petzenhauser, U. Blell, P. J. Spiller, and C. Tenholt, “Efficient Pulsed Quadrupole”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2799-2801. doi:10.18429/JACoW-IPAC2015-WEPMA021
[n] M. G. Abbott, G. Rehm, and I. Uzun, “A New Fast Data Logger and Viewer at Diamond: the FA Archiver”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST03, pp. 1244-1247.
[n] E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
[n] B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
[n] H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1986-1989. doi:10.18429/JACoW-IPAC2018-WEPAF068
[n] C. Kurfuerst, M. R. Bartosik, B. Dehning, T. Eisel, M. Sapinski, and V. Eremin, “Operation of Silicon, Diamond and Liquid Helium Detectors in the Range of Room Temperature to 1.9 Kelvin and After an Irradiation Dose of Several Mega Gray”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC44, pp. 791-794.
[n] C. Montag, “Simulation of Ground Motion Induced Proton Beam Orbit Vibration in HERA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP40, pp. 1566-1568.
[n] K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3423-3426. doi:10.18429/JACoW-IPAC2019-THYYPLM3
[n] H. Witte, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE - Engineering Design”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA08, pp. 1244-1246.
[n] F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
[n] A. Rai et al., “Operational Experience with the IUAC Linac”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO025, pp. 244-248.
[n] D. Zangrando et al., “The Infrastructure for the Elettra Sincrotrone Trieste”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3375-3377. doi:10.18429/JACoW-IPAC2017-WEPVA052
[n] M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
[n] C. Limborg-Deprey, D. Dowell, Z. Li, J. F. Schmerge, and L. Xiao, “Modifications on RF Components in the LCLS Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT032, pp. 2233-2235.
[n] A. Brauch, M. Arnold, J. Enders, L. E. Jürgensen, N. Pietralla, and S. Weih, “Bunch Length Measurement Systems at S-DALINAC”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 96-99. doi:10.18429/JACoW-IBIC2022-MOP26
For LaTeX
Use Complete Form
For BibTeX
References
- I. J. Petzenhauser, U. Blell, P. J. Spiller, and C. Tenholt, “Efficient Pulsed Quadrupole”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2799-2801.
- M. G. Abbott, G. Rehm, and I. Uzun, “A New Fast Data Logger and Viewer at Diamond: the FA Archiver”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST03, pp. 1244-1247.
- E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
- B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
- H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1986-1989.
- C. Kurfuerst, M. R. Bartosik, B. Dehning, T. Eisel, M. Sapinski, and V. Eremin, “Operation of Silicon, Diamond and Liquid Helium Detectors in the Range of Room Temperature to 1.9 Kelvin and After an Irradiation Dose of Several Mega Gray”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC44, pp. 791-794.
- C. Montag, “Simulation of Ground Motion Induced Proton Beam Orbit Vibration in HERA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP40, pp. 1566-1568.
- K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3423-3426.
- H. Witte, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE - Engineering Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA08, pp. 1244-1246.
- F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
- A. Rai et al., “Operational Experience with the IUAC Linac”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO025, pp. 244-248.
- D. Zangrando et al., “The Infrastructure for the Elettra Sincrotrone Trieste”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3375-3377.
- M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
- C. Limborg-Deprey, D. Dowell, Z. Li, J. F. Schmerge, and L. Xiao, “Modifications on RF Components in the LCLS Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT032, pp. 2233-2235.
- A. Brauch, M. Arnold, J. Enders, L. E. Jürgensen, N. Pietralla, and S. Weih, “Bunch Length Measurement Systems at S-DALINAC”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 96-99.
Back to search
