Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Sanz et al., “Calculation and Design of the Magnet Package in the IFMIF Superconducting RF Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB041, pp. 364-366.
[n] N. Ohuchi et al., “Final-focus Superconducting Magnets for SuperKEKB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1215-1219. doi:10.18429/JACoW-IPAC2018-TUZGBE2
[n] G. Westenskow et al., “A Chopper Driven 11.4-GHz Traveling-Wave RF Generator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 646-649.
[n] R. De Regt, H. L. Hagedoorn, W. Kleeven, and J. A. van der Heide, “Extraction and Central Region Calculations for the Minicyclotron ILEC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 669-672.
[n] J. Yap, A. Steinberg, H. Norman, R. Appleby, and S. Sheehy, “Progress toward TURBO: a novel beam delivery system for charged particle therapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5087-5090. doi:10.18429/JACoW-IPAC2023-THPM091
[n] W. H. Li, I. V. Bazarov, C. M. Gulliford, and J. M. Maxson, “Novel Photocathode Geometry Optimization: Field Enhancing Photoemission Tips”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1605-1608. doi:10.18429/JACoW-IPAC2018-TUPML029
[n] L. C. Penescu et al., “Beam Quality Assurance for Proton Clinical Beams at MedAustron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1899-1901. doi:10.18429/JACoW-IPAC2016-TUPOY001
[n] N. Bazin et al., “Manufacturing Status of the IFMIF LIPAc SRF Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 939-941. doi:10.18429/JACoW-IPAC2017-MOPVA038
[n] D. M. Harryman, T. Lef?¿vre, N. Mounet, and A. Schloegelhofer, “Simulation of Cherenkov Diffraction Radiation for Various Radiator Designs”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 73-77. doi:10.18429/JACoW-IBIC2020-TUPP28
[n] L. C. Penescu, M. Kronberger, T. Kulenkampff, F. Osmic, P. Ursch??tz, and W. Pirkl, “Commissioning and Operation of the MedAustron Injector: Results and Future Outlook”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3202-3204. doi:10.18429/JACoW-IPAC2014-THPME001
[n] M. Koopmans et al., “Preparations for beam commissioning of the carbon RFQ at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5020-5023. doi:10.18429/JACoW-IPAC2023-THPM057
[n] G. Khatri, J. Cenede, A. Frassier, and G. Tranquille, “A Test Bench for Characterizing Electron Cooler Components at up to -80 kVDC”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 61-64. doi:10.18429/JACoW-COOL2023-THPOSRP06
[n] E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS061, unpublished.
[n] R. F. Koontz, R. Iverson, G. K. Leger, and R. H. Miller, “Commissioning and Operation of the Nuclear Physics Injection at SLAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3036-3039.
[n] R. Saban et al., “First Results and Status of the LHC Test String 2”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE013, pp. 2424-2426.
[n] M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
[n] Y. Fukui, “Longitudinal Bunch Rotation Scheme in a Muon Cooling Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB085, pp. 1790-1791.
[n] G. Khatri, A. Frassier, G. Tranquille, and J. Cenede, “Development of high-power electron gun and collector for the new antiproton decelerator electron cooler”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1680-1683. doi:10.18429/JACoW-IPAC2024-TUPS19
[n] G. V. Troubnikov et al., “Particle Dynamics in the Low Energy Positron Toroidal Accumulator: First Experiments and Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT104, pp. 1396-1398.
[n] M. G. Minty and R. H. Siemann, “Klystron Power Specifications Based on Transient Beam Loading Analysis in Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA09, pp. 3217-3219.
[n] S. Yu et al., “Relativistic-Klystron Two-Beam-Accelerator as a Power Source for a 1 TeV Next Linear Collider - A Systems Study”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-99, pp. 597-599.
[n] G. Stancari, I. A. Morozov, A. Valishev, and D. N. Shatilov, “Simulation of Hollow Electron Beam Collimation in the Fermilab Tevatron Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB008, pp. 94-96.
[n] S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
[n] A. Gamp, “RF Generation and Control for the TESLA Test Facility”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93H02, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Sanz et al., “Calculation and Design of the Magnet Package in the IFMIF Superconducting RF Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB041, pp. 364-366.
- N. Ohuchi et al., “Final-focus Superconducting Magnets for SuperKEKB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1215-1219.
- G. Westenskow et al., “A Chopper Driven 11.4-GHz Traveling-Wave RF Generator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 646-649.
- R. De Regt, H. L. Hagedoorn, W. Kleeven, and J. A. van der Heide, “Extraction and Central Region Calculations for the Minicyclotron ILEC”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 669-672.
- J. Yap, A. Steinberg, H. Norman, R. Appleby, and S. Sheehy, “Progress toward TURBO: a novel beam delivery system for charged particle therapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM091, pp. 5087-5090.
- W. H. Li, I. V. Bazarov, C. M. Gulliford, and J. M. Maxson, “Novel Photocathode Geometry Optimization: Field Enhancing Photoemission Tips”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1605-1608.
- L. C. Penescu et al., “Beam Quality Assurance for Proton Clinical Beams at MedAustron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1899-1901.
- N. Bazin et al., “Manufacturing Status of the IFMIF LIPAc SRF Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 939-941.
- D. M. Harryman, T. Lef?¿vre, N. Mounet, and A. Schloegelhofer, “Simulation of Cherenkov Diffraction Radiation for Various Radiator Designs”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 73-77.
- L. C. Penescu, M. Kronberger, T. Kulenkampff, F. Osmic, P. Ursch??tz, and W. Pirkl, “Commissioning and Operation of the MedAustron Injector: Results and Future Outlook”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3202-3204.
- M. Koopmans et al., “Preparations for beam commissioning of the carbon RFQ at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM057, pp. 5020-5023.
- G. Khatri, J. Cenede, A. Frassier, and G. Tranquille, “A Test Bench for Characterizing Electron Cooler Components at up to -80 kVDC”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP06, pp. 61-64.
- E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS061, this conference.
- R. F. Koontz, R. Iverson, G. K. Leger, and R. H. Miller, “Commissioning and Operation of the Nuclear Physics Injection at SLAC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3036-3039.
- R. Saban et al., “First Results and Status of the LHC Test String 2”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE013, pp. 2424-2426.
- M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
- Y. Fukui, “Longitudinal Bunch Rotation Scheme in a Muon Cooling Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB085, pp. 1790-1791.
- G. Khatri, A. Frassier, G. Tranquille, and J. Cenede, “Development of high-power electron gun and collector for the new antiproton decelerator electron cooler”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS19, pp. 1680-1683.
- G. V. Troubnikov et al., “Particle Dynamics in the Low Energy Positron Toroidal Accumulator: First Experiments and Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT104, pp. 1396-1398.
- M. G. Minty and R. H. Siemann, “Klystron Power Specifications Based on Transient Beam Loading Analysis in Damping Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPA09, pp. 3217-3219.
- S. Yu et al., “Relativistic-Klystron Two-Beam-Accelerator as a Power Source for a 1 TeV Next Linear Collider - A Systems Study”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-99, pp. 597-599.
- G. Stancari, I. A. Morozov, A. Valishev, and D. N. Shatilov, “Simulation of Hollow Electron Beam Collimation in the Fermilab Tevatron Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB008, pp. 94-96.
- S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
- A. Gamp, “RF Generation and Control for the TESLA Test Facility”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93H02, pp. XX-XX.
Back to search