Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 661-664.
[n] J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862.
[n] A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
[n] M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
[n] P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1630-1633. doi:10.18429/JACoW-IPAC2018-TUPML040
[n] C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
[n] R. H. Helm, M. J. Lee, and P. L. Morton, “Evaluation of Synchrotron Radiation Integrals”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 900-902.
[n] W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
[n] Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1299-1303.
[n] M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
[n] M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
[n] R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n] U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 269-272.
[n] M. Knott, L. Lewis, and C. Potts, “A Pulsed Extraction Magnet System at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1313-1317.
[n] R. A. Dehn, J. E. Griffin, and Q. A. Kerns, “Mode Damping in NAL Main Ring Accelerating Cavities”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 260-262.
[n] T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Measurements and Analysis of Longitudinal HOM Driven Coupled Bunch Modes in PEP-II Rings”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF014, pp. 115-119.
[n] B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
[n] N. Sereno et al., “First Beam Tests of the APS MBA Upgrade Orbit Feedback Controller”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 39-42. doi:10.18429/JACoW-IBIC2016-MOPG06
[n] G. Feng, B. Deriy, and J. Wang, “A Linear MOSFET Regulator for Improving Performance of the Booster Ramping Power Supplies at the APS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN114, pp. 434-436.
[n] D. A. Swenson, F. W. Guy, and W. J. Starling, “Commissioning the 2.5-MeV RFD Linac Prototype”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA63, pp. 3531-3533.
[n] T. Saito, I. Miura, M. Uraki, Y. Kumata, Y. Touchi, and K. Uno, “The RF System for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-02, pp. 201-204.
[n] J. F. Bridges, J. E. Griffin, and D. E. Johnson, “Dielectric Property Measurements on Large Alumina Vacuum Seals Used on Fermilab Accelerator RF Cavities”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1296-1299.
[n] S. Babel et al., “Magnet Corrector Power Supply Controller for LCLS-I”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 100-102. doi:10.18429/JACoW-ICALEPCS2015-MOPGF002
[n] M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1491-1494.
[n] I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
[n] F. Pedersen, N. Rasmussen, and H. Schoenauer, “Fast Capture of Heavy Ions in the CERN PS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1225-1228.
[n] K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
[n] M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO02, pp. 278-281. doi:10.18429/JACoW-CYCLOTRONS2022-THBO02
For LaTeX
Use Complete Form
For BibTeX
References
- Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 661-664.
- J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862.
- A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
- M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
- P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1630-1633.
- C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
- R. H. Helm, M. J. Lee, and P. L. Morton, “Evaluation of Synchrotron Radiation Integrals”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 900-902.
- W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
- Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1299-1303.
- M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
- M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
- R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 230-232.
- U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 269-272.
- M. Knott, L. Lewis, and C. Potts, “A Pulsed Extraction Magnet System at the Zero Gradient Synchrotron (ZGS)”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1313-1317.
- R. A. Dehn, J. E. Griffin, and Q. A. Kerns, “Mode Damping in NAL Main Ring Accelerating Cavities”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 260-262.
- T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Measurements and Analysis of Longitudinal HOM Driven Coupled Bunch Modes in PEP-II Rings”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF014, pp. 115-119.
- B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
- N. Sereno et al., “First Beam Tests of the APS MBA Upgrade Orbit Feedback Controller”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 39-42.
- G. Feng, B. Deriy, and J. Wang, “A Linear MOSFET Regulator for Improving Performance of the Booster Ramping Power Supplies at the APS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN114, pp. 434-436.
- D. A. Swenson, F. W. Guy, and W. J. Starling, “Commissioning the 2.5-MeV RFD Linac Prototype”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA63, pp. 3531-3533.
- T. Saito, I. Miura, M. Uraki, Y. Kumata, Y. Touchi, and K. Uno, “The RF System for the RCNP Ring Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-02, pp. 201-204.
- J. F. Bridges, J. E. Griffin, and D. E. Johnson, “Dielectric Property Measurements on Large Alumina Vacuum Seals Used on Fermilab Accelerator RF Cavities”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1296-1299.
- S. Babel et al., “Magnet Corrector Power Supply Controller for LCLS-I”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 100-102.
- M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1491-1494.
- I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
- F. Pedersen, N. Rasmussen, and H. Schoenauer, “Fast Capture of Heavy Ions in the CERN PS Booster”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1225-1228.
- K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
- M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO02, pp. 278-281.
Back to search