Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 266. doi:10.18429/JACoW-MEDSI2020-WEPB01
[n] K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2031-2033. doi:10.18429/JACoW-IPAC2022-WEPOTK004
[n] A. E. Siy et al., “Design and Fabrication of a Waveguide for Conductivity Measurement of Electroplated Copper at 170GHz - 200GHz”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPC05, pp. XX-XX.
[n] E. Haas, E. Cardenas, and A. P. Sirna, “An Improved, Compact High Temperature Sample Furnace for X-Ray Powder Diffraction”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 317. doi:10.18429/JACoW-MEDSI2020-WEPC05
[n] R. L. Madrak et al., “Improving Magnetic Materials for RCS Cavity Tuners”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1139-1142. doi:10.18429/JACoW-IPAC2021-MOPAB366
[n] J. M. Asimow, G. H. Hoffstaetter, D. Sagan, and M. G. Signorelli, “Fast First-Order Spin Propagation for Spin Matching and Polarization Optimization with Bmad”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 369-371. doi:10.18429/JACoW-NAPAC2022-TUPA14
[n] P. A. Arrutia Sota et al., “RF techniques for spill quality improvement in the SPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 319-322. doi:10.18429/JACoW-IPAC2023-MOPA116
[n] M. Waniczek, A. Curcio, G. W. Kowalski, R. Pana, and A. I. Wawrzyniak, “X-Ray Beam Position Monitor (XBPM) Calibration at NSRC Solaris”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4292-4295. doi:10.18429/JACoW-IPAC2021-THPAB249
[n] A. Andersson, J. Breunlin, M. Brosi, and R. Svärd, “Recent progress at the UV to visible light-based diagnostic beam lines at MAX IV”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL135, unpublished.
[n] K. J. Suthar, G. Navrotski, A. Zholents, and P. R. Carriere, “Study of Copper Microstructure Produced by Electroforming for the 180-GHz Frequency Corrugated Waveguide”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 178. doi:10.18429/JACoW-MEDSI2020-TUPC01
[n] J. K. Tiskumara, J. R. Delayen, G. V. Eremeev, and U. Pudasaini, “Surface Properties and RF Performance of Vapor Diffused Nb₃Sn on Nb after Sequential Anneals below 1000 °C”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 433-437. doi:10.18429/JACoW-SRF2023-TUPTB020
For LaTeX
Use Complete Form
For BibTeX
References
- X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 266.
- K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2031-2033.
- A. E. Siy et al., “Design and Fabrication of a Waveguide for Conductivity Measurement of Electroplated Copper at 170GHz - 200GHz”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUPC05, pp. XX-XX.
- E. Haas, E. Cardenas, and A. P. Sirna, “An Improved, Compact High Temperature Sample Furnace for X-Ray Powder Diffraction”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 317.
- R. L. Madrak et al., “Improving Magnetic Materials for RCS Cavity Tuners”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1139-1142.
- J. M. Asimow, G. H. Hoffstaetter, D. Sagan, and M. G. Signorelli, “Fast First-Order Spin Propagation for Spin Matching and Polarization Optimization with Bmad”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 369-371.
- P. A. Arrutia Sota et al., “RF techniques for spill quality improvement in the SPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA116, pp. 319-322.
- M. Waniczek, A. Curcio, G. W. Kowalski, R. Pana, and A. I. Wawrzyniak, “X-Ray Beam Position Monitor (XBPM) Calibration at NSRC Solaris”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4292-4295.
- A. Andersson, J. Breunlin, M. Brosi, and R. Svärd, “Recent progress at the UV to visible light-based diagnostic beam lines at MAX IV”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL135, unpublished.
- K. J. Suthar, G. Navrotski, A. Zholents, and P. R. Carriere, “Study of Copper Microstructure Produced by Electroforming for the 180-GHz Frequency Corrugated Waveguide”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 178.
- J. K. Tiskumara, J. R. Delayen, G. V. Eremeev, and U. Pudasaini, “Surface Properties and RF Performance of Vapor Diffused Nb₃Sn on Nb after Sequential Anneals below 1000 °C”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB020, pp. 433-437.
Back to search