Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Citron, “Round Table Discussion: Conclusions”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-15, pp. XX-XX.
[n] K. Abe et al., “Development of the Kicker Magnet for BSR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B12, pp. 2113-2115.
[n] S. Azizpourian, H. Afarideh, M. Afkhami Karaei, M. Mousavinia, and F. Abbasi Davani, “Simulation of Optimum Thickness and Configuration of 10 MeV Cyclotron Shield”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 110-113. doi:10.18429/JACoW-Cyclotrons2016-MOP22
[n] C. B. Bigham, T. K. Alexander, R. J. Burton, E. A. Heighway, J. E. McGregor, and E. P. Stock, “First Operation of the TASCC Beam Bunching System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2763-2766.
[n] T. Kamps, “Collimation System for the BESSY FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS02, pp. XX-XX.
[n] H. Grote, “Self-consistent Orbits with Beam-beam Effect in the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B10, pp. 1202-1204.
[n] T. Hezel et al., “Experimental Results with a Novel Superconductive In-Vacuum Mini-Undulator Test Device at the Mainz Microtron MAMI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR5, pp. 165-167.
[n] C. Joshi, “Laser Accelerators: Experiments, Computations and Prospects”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 1BC005, pp. 11-15.
[n] G. A. Karamysheva and L. M. Onischenko, “INJECTION SYSTEM OF THE COMPACT CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO18, pp. XX-XX.
[n] J. D. Fox et al., “A 4 GS/s Feedback Processing System for Control of Intra-Bunch Instabilities”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUBL2, pp. 323-326.
[n] A. K. Ghosh, J. P. Cozzolino, M. A. Harrison, W. B. Sampson, and P. J. Wanderer, “A Common Coil Magnet for Testing High Field Superconductors”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP117, pp. 3230-3232.
[n] Y. Sun, P. Emma, T. O. Raubenheimer, and J. Wu, “X-band FEL Driver Linac Design with Optics Linearization”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO15, pp. 273-275.
[n] H. Halama and H. Hahn, “Proposed Microwave Systems for Superconducting Radiofrequency Beam Separators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 350-356.
[n] O. Karamyshev, G. A. Karamysheva, D. V. Popov, G. Shirkov, S. G. Shirkov, and V. Malinin, “Beam Dynamics Simulations in the Dubna SC202 Superconducting Cyclotron for Hadron Therapy”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3270-3272. doi:10.18429/JACoW-IPAC2018-THPAK028
[n] P. Stoltz and A. Prideaux, “Close-Coupling R-Matrix Approach to Simulating Ion-Atom Collisions for Accelerator Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP020, pp. 1685-1685.
[n] A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3999-4001. doi:10.18429/JACoW-IPAC2016-THPOW028
[n] A. Friedman, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “3d and r, z Particle Simulation of Beams for Heavy Ion Fusion: The WARP Code”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 263-266.
[n] T. O. Raubenheimer and R. D. Ruth, “A New Method of Correcting the Trajectory In Linacs”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2503-2506.
[n] M. J. Burns, “Status of the Dual-Axis Radiographic Hydrotest Facility”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP85, pp. 875-880.
[n] H. Grote, “Beam Threading in the LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05B, pp. 1277-1279.
[n] B. Hillenbrand, “The Preparation of Superconducting Nb3Sn Surfaces for RF Applications”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-3, pp. XX-XX.
[n] L. Schachter, “New Directions in the RF Sources”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2567-2572.
[n] C. E. Chen et al., “Progress of RFQ for Ion Implantation at Peking University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B11, pp. 2594-2596.
[n] T. O. Raubenheimer and R. D. Ruth, “A New Trajectory Correction Technique for Linacs”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1405-1408.
[n] R. M. Suyama, J. A. Johnson, and D. R. Machen, “The FMIT Facility Control System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2252-2255.
[n] M. Busch et al., “Further Tests on the Final State of the SC 325 MHz CH-Cavity and Coupler Test Bench Update”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2783-2785. doi:10.18429/JACoW-IPAC2018-WEPML040
[n] A. Bosotti, M. Di Giacomo, C. Pagani, G. Varisco, and F. Zibra, “Tests of the Computer Controlled Electronics for the RF System of the Milan k800 Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1014-1017.
[n] G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173.
[n] D. Holmes, “Status of the Fermilab Main Injector and Recycler”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B001, pp. 47-50.
[n] Y. Matsumoto et al., “A New DC Muon Beam Line at RCNP, Osaka University”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2537-2540. doi:10.18429/JACoW-IPAC2015-WEPWA021
[n] Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
[n] T. O. Raubenheimer, “A Formalism and Computer Program for Couple Lattices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1313-1316.
[n] Y. Arakaki et al., “Electrostatic Septum for 50GeV Proton Synchrotron in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB010, pp. 3900-3902.
[n] H. Hahn and H. J. Halama, “Q-Measurements of Superconducting Cavities at 2.868 GHz”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-8, pp. 774-774.
[n] K. Bishofberger et al., “An overview of the LAMP front-end upgrade at LANSCE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1677-1679. doi:10.18429/JACoW-IPAC2024-TUPS18
[n] H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
[n] J. D, L. Buchmann, J. S. Fraser, and H. R. Schneider, “Accelerated Radioactive Beams at TRIUMF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2607-2610.
[n] A. Citron, “Compilation of Experimental Results and Operating Experience”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-1, pp. XX-XX.
[n] M. Tigner, “Superconducting Cavities for Electron Storage Rings - a Review”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-14, pp. XX-XX.
[n] B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 141-143. doi:10.18429/JACoW-RUPAC2016-THCDMH02
[n] W. M. Sharp et al., “Realistic Modeling of Chamber Transport for Heavy-Ion Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG022, pp. 2637-2639.
[n] C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3283-3286.
[n] C. Dimopoulou et al., “Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD04, pp. 25-28.
[n] S. T. Huynh et al., “Applying Standardised Software Architectural Concepts to Design Robust and Adaptable PLC Solutions”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 40-46. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO04
[n] M. Kuntze, “Additional Design Criteria for low B Structures”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-11, pp. XX-XX.
[n] M. S. Patil, C. Compton, S. H. Kim, S. J. Miller, and T. Xu, “Mechanical Design and Analysis of SRF Gun Cavity Using ASME BPVC Section Viii, Division-2, Design by Analysis Requirement”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 501-506. doi:10.18429/JACoW-SRF2023-TUPTB040
[n] R. M. Hutcheon, J. C. Brown, R. J. Burton, and R. A. Vokes, “A Simple Higher Order Mode Damping System for the PETRA II Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1546-1549.
[n] G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
[n] M. T. Buttram, “Repetitive Pulse Accelerator Technology for Light Ion Inertial Confinement Fusion”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1571-1576.
[n] P. M. Lapostolle, “Bunching”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-1, pp. 317-327.
[n] A. Gover and A. Nause, “Computational Model Analysis for Experimental Observation of Optical Current Noise Suppression Below the Shot-noise Limit”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH2A004, pp. 783-786.
[n] H. A. Thiessen, “A Review of Kaon Factory Proposals”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1601-1607.
[n] T. Saeki et al., “The first processing of capacitive-coupling coupler at room temperature in a cryomodule at STF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP45, pp. XX-XX.
[n] B. A. Frolov, V. S. Klenov, and V. Zubets, “Power Supplies for IHEP Negative Hydrogen Ions Source”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 612-614. doi:10.18429/JACoW-RUPAC2016-THPSC031
[n] Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-MEDSI2016-TUPE44
For LaTeX
Use Complete Form
For BibTeX
References
- A. Citron, “Round Table Discussion: Conclusions”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-15, pp. XX-XX.
- K. Abe et al., “Development of the Kicker Magnet for BSR”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B12, pp. 2113-2115.
- S. Azizpourian, H. Afarideh, M. Afkhami Karaei, M. Mousavinia, and F. Abbasi Davani, “Simulation of Optimum Thickness and Configuration of 10 MeV Cyclotron Shield”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 110-113.
- C. B. Bigham, T. K. Alexander, R. J. Burton, E. A. Heighway, J. E. McGregor, and E. P. Stock, “First Operation of the TASCC Beam Bunching System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2763-2766.
- T. Kamps, “Collimation System for the BESSY FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS02, pp. XX-XX.
- H. Grote, “Self-consistent Orbits with Beam-beam Effect in the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B10, pp. 1202-1204.
- T. Hezel et al., “Experimental Results with a Novel Superconductive In-Vacuum Mini-Undulator Test Device at the Mainz Microtron MAMI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR5, pp. 165-167.
- C. Joshi, “Laser Accelerators: Experiments, Computations and Prospects”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 1BC005, pp. 11-15.
- G. A. Karamysheva and L. M. Onischenko, “INJECTION SYSTEM OF THE COMPACT CYCLOTRON”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO18, pp. XX-XX.
- J. D. Fox et al., “A 4 GS/s Feedback Processing System for Control of Intra-Bunch Instabilities”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUBL2, pp. 323-326.
- A. K. Ghosh, J. P. Cozzolino, M. A. Harrison, W. B. Sampson, and P. J. Wanderer, “A Common Coil Magnet for Testing High Field Superconductors”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP117, pp. 3230-3232.
- Y. Sun, P. Emma, T. O. Raubenheimer, and J. Wu, “X-band FEL Driver Linac Design with Optics Linearization”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO15, pp. 273-275.
- H. Halama and H. Hahn, “Proposed Microwave Systems for Superconducting Radiofrequency Beam Separators”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 350-356.
- O. Karamyshev, G. A. Karamysheva, D. V. Popov, G. Shirkov, S. G. Shirkov, and V. Malinin, “Beam Dynamics Simulations in the Dubna SC202 Superconducting Cyclotron for Hadron Therapy”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3270-3272.
- P. Stoltz and A. Prideaux, “Close-Coupling R-Matrix Approach to Simulating Ion-Atom Collisions for Accelerator Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP020, pp. 1685-1685.
- A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3999-4001.
- A. Friedman, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “3d and r, z Particle Simulation of Beams for Heavy Ion Fusion: The WARP Code”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 263-266.
- T. O. Raubenheimer and R. D. Ruth, “A New Method of Correcting the Trajectory In Linacs”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2503-2506.
- M. J. Burns, “Status of the Dual-Axis Radiographic Hydrotest Facility”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP85, pp. 875-880.
- H. Grote, “Beam Threading in the LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP05B, pp. 1277-1279.
- B. Hillenbrand, “The Preparation of Superconducting Nb3Sn Surfaces for RF Applications”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-3, pp. XX-XX.
- L. Schachter, “New Directions in the RF Sources”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2567-2572.
- C. E. Chen et al., “Progress of RFQ for Ion Implantation at Peking University”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B11, pp. 2594-2596.
- T. O. Raubenheimer and R. D. Ruth, “A New Trajectory Correction Technique for Linacs”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1405-1408.
- R. M. Suyama, J. A. Johnson, and D. R. Machen, “The FMIT Facility Control System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2252-2255.
- M. Busch et al., “Further Tests on the Final State of the SC 325 MHz CH-Cavity and Coupler Test Bench Update”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2783-2785.
- A. Bosotti, M. Di Giacomo, C. Pagani, G. Varisco, and F. Zibra, “Tests of the Computer Controlled Electronics for the RF System of the Milan k800 Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1014-1017.
- G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173.
- D. Holmes, “Status of the Fermilab Main Injector and Recycler”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B001, pp. 47-50.
- Y. Matsumoto et al., “A New DC Muon Beam Line at RCNP, Osaka University”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2537-2540.
- Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
- T. O. Raubenheimer, “A Formalism and Computer Program for Couple Lattices”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1313-1316.
- Y. Arakaki et al., “Electrostatic Septum for 50GeV Proton Synchrotron in J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB010, pp. 3900-3902.
- H. Hahn and H. J. Halama, “Q-Measurements of Superconducting Cavities at 2.868 GHz”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-8, pp. 774-774.
- K. Bishofberger et al., “An overview of the LAMP front-end upgrade at LANSCE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS18, pp. 1677-1679.
- H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
- J. D, L. Buchmann, J. S. Fraser, and H. R. Schneider, “Accelerated Radioactive Beams at TRIUMF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2607-2610.
- A. Citron, “Compilation of Experimental Results and Operating Experience”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-1, pp. XX-XX.
- M. Tigner, “Superconducting Cavities for Electron Storage Rings - a Review”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-14, pp. XX-XX.
- B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 141-143.
- W. M. Sharp et al., “Realistic Modeling of Chamber Transport for Heavy-Ion Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG022, pp. 2637-2639.
- C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3283-3286.
- C. Dimopoulou et al., “Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD04, pp. 25-28.
- S. T. Huynh et al., “Applying Standardised Software Architectural Concepts to Design Robust and Adaptable PLC Solutions”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO04, pp. 40-46.
- M. Kuntze, “Additional Design Criteria for low B Structures”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-11, pp. XX-XX.
- M. S. Patil, C. Compton, S. H. Kim, S. J. Miller, and T. Xu, “Mechanical Design and Analysis of SRF Gun Cavity Using ASME BPVC Section Viii, Division-2, Design by Analysis Requirement”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB040, pp. 501-506.
- R. M. Hutcheon, J. C. Brown, R. J. Burton, and R. A. Vokes, “A Simple Higher Order Mode Damping System for the PETRA II Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1546-1549.
- G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
- M. T. Buttram, “Repetitive Pulse Accelerator Technology for Light Ion Inertial Confinement Fusion”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1571-1576.
- P. M. Lapostolle, “Bunching”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-1, pp. 317-327.
- A. Gover and A. Nause, “Computational Model Analysis for Experimental Observation of Optical Current Noise Suppression Below the Shot-noise Limit”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH2A004, pp. 783-786.
- H. A. Thiessen, “A Review of Kaon Factory Proposals”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1601-1607.
- T. Saeki et al., “The first processing of capacitive-coupling coupler at room temperature in a cryomodule at STF”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP45, pp. XX-XX.
- B. A. Frolov, V. S. Klenov, and V. Zubets, “Power Supplies for IHEP Negative Hydrogen Ions Source”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 612-614.
- Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 254-256.
Back to search