Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] U. Ratzinger, S. Minaev, and C. A. Kitegi, “The IH Cavity for HITRAP”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP10, pp. 54-56.
[n] S. Saraf, S. C. Alverson, M. Boyes, D. K. Gill, S. Kwon, and G. Lanza, “Control Systems Design for LCLS-II Vacuum System at SLAC National Accelerator Laboratory”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA128, pp. XX-XX.
[n] C. Welsch, “EuPRAXIA doctoral network”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1567-1570. doi:10.18429/JACoW-IPAC2023-TUPA109
[n] S. Shchelkunov et al., “Recent progress at the Low Energy Accelerator Development Facility”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2658-2660. doi:10.18429/JACoW-IPAC2025-THPB089
[n] D. Angal-Kalinin et al., “Electron beam test facilities for novel applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 32-37. doi:10.18429/JACoW-IPAC2023-MOZG1
[n] R. De Maria et al., “SixTrack Version 5: Status and New Developments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3200-3203. doi:10.18429/JACoW-IPAC2019-WEPTS043
[n] J. Diamond, “An Agile/XP software development process for modernizing the accelerator control system at Fermilab”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1512-1515. doi:10.18429/JACoW-ICALEPCS2025-THMG014
[n] Y. Nakazawa et al., “High-Power Test of an APF IH-DTL Prototype for the Muon Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 275-278. doi:10.18429/JACoW-LINAC2022-MOPORI22
[n] L. Zytniak, K. Fugiel, M. Gandor, P. Mo, S. Kupiecki, and T. Madej, “IC@MS – web-based alarm management software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1722-1727. doi:10.18429/JACoW-ICALEPCS2025-THPD058
[n] N. Bazin, “Cryomodule Design”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper SATUT01, unpublished.
[n] T. Madej, L. Zytniak, and J. Smyrski, “Gas supply control system for straw tube detectors in the PANDA experiment”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1727-1731. doi:10.18429/JACoW-ICALEPCS2025-THPD059
[n] K. Kümpel, H. Podlech, and S. Wagner, “Optimisation of the stem cooling design of the normally conducting Myrrha-CH structures using the example of CH 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1751-1753. doi:10.18429/JACoW-IPAC2023-TUPA187
[n] A. H. Barnard et al., “Vertical Focussing with a Field Gradient Spiral Inflector”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 58-61. doi:10.18429/JACoW-CYCLOTRONS2019-MOP016
[n] R. Thornton et al., “Initial results from 35 keV H+ beam at the LANL RFQ test stand”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 149-152. doi:10.18429/JACoW-IPAC2024-MOPC39
[n] H. Sakai et al., “Development of Copper Coated Chamber for Third Generation Light Sources”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE040, pp. 2633-2635.
[n] S. Biri et al., “Multi-Diagnostic Setup to Investigate the Two-Close-Frequency Phenomena”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 115-119. doi:10.18429/JACoW-ECRIS2018-TUP14
[n] J. Lewellen et al., “Requirements Evolution for the LANSCE Accelerator Modernization Project (LAMP)”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4329, unpublished.
[n] K. Malapati and Z. Lentz, “EPICS in practice at LCLS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1537-1542. doi:10.18429/JACoW-ICALEPCS2025-THMR008
[n] C. Feng, “Comissioning progress and advanced FEL experiments at the SXFEL facility”, presented at the SAP'23, Xichang, China, Jul. 2023, paper MOBA03, unpublished.
[n] T. Hellert and A. Sulc, “Enhancing ALS injector performance through data analysis”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM021, unpublished.
[n] C. Hovater, “RF Control of High QL Superconducting Cavities”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper WE105, pp. 704-708.
[n] J. Knobloch et al., “CW Superconducting RF Photoinjector Development for Energy Recovery Linacs”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP112, pp. 998-1000.
[n] D. Schulte et al., “Status of the CLIC Phase and Amplitude Stabilisation Concept”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP024, pp. 103-105.
[n] V. K. B. Olsen, J. J. Batkiewicz, S. Deghaye, S. J. Gessner, E. Gschwendtner, and P. Muggli, “Data Acquisition and Controls Integration of the AWAKE Experiment at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1833-1835. doi:10.18429/JACoW-IPAC2017-TUPIK061
[n] D. Hitz, D. Cormier, and J.-M. Mathonnet, “A New Room Temperature ECR Ion Source for Accelerator Facilities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI005, pp. 1718-1720.
[n] B. Y. Feng, H. B. Chen, Q. Gao, X. Lin, J. R. Shi, and H. Zha, “Multipole Field Optimization of X-Band High Gradient Structure”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 108-110. doi:10.18429/JACoW-SAP2023-TUPB013
[n] J. C. Yang, “The High-Intensity Heavy-Ion Accelerator R&D”, presented at the SAP'23, Xichang, China, Jul. 2023, paper MOAA03, unpublished.
[n] J.-K. Liao, Y.-S. Cheng, K. H. Hu, K.-T. Hsu, S.-H. Lee, and C. Wu, “Development of a new control interface for the electron gun pulser of TLS LINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4018-4020. doi:10.18429/JACoW-IPAC2023-THPA032
[n] T. J. Zhang et al., “A New Solution for Cost Effective, High Average Power (2 GeV, 6 MW) Proton Accelerator and its R&D Activities”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 334-339. doi:10.18429/JACoW-CYCLOTRONS2019-FRA01
[n] K. R. Eppley, “Simulation of Traveling-Wave Output Structures for High Power rf Tubes”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1190-1193.
[n] O. Azuma, H. Mizuno, and S. Tokumoto, “High Power Operation Results of the X-Band SLED System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1202-1205.
[n] D. Demetriadou, A. Abramov, G. Iadarola, and F. Van der Veken, “Tools for integrated simulation of collimation processes in Xsuite”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2801-2804. doi:10.18429/JACoW-IPAC2023-WEPA066
[n] N. Banerjee et al., “Electron Cooling Experiment for Proton Beams with Intense Space-Charge in IOTA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2395-2398. doi:10.18429/JACoW-IPAC2022-THOXGD2
[n] S. Döbert et al., “Bunch Length Measurements in CTF3”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP082, pp. 588-590.
For LaTeX
Use Complete Form
For BibTeX
References
- U. Ratzinger, S. Minaev, and C. A. Kitegi, “The IH Cavity for HITRAP”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP10, pp. 54-56.
- S. Saraf, S. C. Alverson, M. Boyes, D. K. Gill, S. Kwon, and G. Lanza, “Control Systems Design for LCLS-II Vacuum System at SLAC National Accelerator Laboratory”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA128, pp. XX-XX.
- C. Welsch, “EuPRAXIA doctoral network”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA109, pp. 1567-1570.
- S. Shchelkunov et al., “Recent progress at the Low Energy Accelerator Development Facility”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB089, pp. 2658-2660.
- D. Angal-Kalinin et al., “Electron beam test facilities for novel applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOZG1, pp. 32-37.
- R. De Maria et al., “SixTrack Version 5: Status and New Developments”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3200-3203.
- J. Diamond, “An Agile/XP software development process for modernizing the accelerator control system at Fermilab”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1512-1515.
- Y. Nakazawa et al., “High-Power Test of an APF IH-DTL Prototype for the Muon Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 275-278.
- L. Zytniak, K. Fugiel, M. Gandor, P. Mo, S. Kupiecki, and T. Madej, “IC@MS – web-based alarm management software”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1722-1727.
- N. Bazin, “Cryomodule Design”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper SATUT01, unpublished.
- T. Madej, L. Zytniak, and J. Smyrski, “Gas supply control system for straw tube detectors in the PANDA experiment”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1727-1731.
- K. Kümpel, H. Podlech, and S. Wagner, “Optimisation of the stem cooling design of the normally conducting Myrrha-CH structures using the example of CH 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA187, pp. 1751-1753.
- A. H. Barnard et al., “Vertical Focussing with a Field Gradient Spiral Inflector”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 58-61.
- R. Thornton et al., “Initial results from 35 keV H+ beam at the LANL RFQ test stand”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC39, pp. 149-152.
- H. Sakai et al., “Development of Copper Coated Chamber for Third Generation Light Sources”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE040, pp. 2633-2635.
- S. Biri et al., “Multi-Diagnostic Setup to Investigate the Two-Close-Frequency Phenomena”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 115-119.
- J. Lewellen et al., “Requirements Evolution for the LANSCE Accelerator Modernization Project (LAMP)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4329, this conference.
- K. Malapati and Z. Lentz, “EPICS in practice at LCLS”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1537-1542.
- C. Feng, “Comissioning progress and advanced FEL experiments at the SXFEL facility”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper MOBA03, unpublished.
- T. Hellert and A. Sulc, “Enhancing ALS injector performance through data analysis”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM021, unpublished.
- C. Hovater, “RF Control of High QL Superconducting Cavities”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper WE105, pp. 704-708.
- J. Knobloch et al., “CW Superconducting RF Photoinjector Development for Energy Recovery Linacs”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP112, pp. 998-1000.
- D. Schulte et al., “Status of the CLIC Phase and Amplitude Stabilisation Concept”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP024, pp. 103-105.
- V. K. B. Olsen, J. J. Batkiewicz, S. Deghaye, S. J. Gessner, E. Gschwendtner, and P. Muggli, “Data Acquisition and Controls Integration of the AWAKE Experiment at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1833-1835.
- D. Hitz, D. Cormier, and J.-M. Mathonnet, “A New Room Temperature ECR Ion Source for Accelerator Facilities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI005, pp. 1718-1720.
- B. Y. Feng, H. B. Chen, Q. Gao, X. Lin, J. R. Shi, and H. Zha, “Multipole Field Optimization of X-Band High Gradient Structure”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 108-110.
- J. C. Yang, “The High-Intensity Heavy-Ion Accelerator R&D”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper MOAA03, unpublished.
- J.-K. Liao, Y.-S. Cheng, K. H. Hu, K.-T. Hsu, S.-H. Lee, and C. Wu, “Development of a new control interface for the electron gun pulser of TLS LINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA032, pp. 4018-4020.
- T. J. Zhang et al., “A New Solution for Cost Effective, High Average Power (2 GeV, 6 MW) Proton Accelerator and its R&D Activities”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 334-339.
- K. R. Eppley, “Simulation of Traveling-Wave Output Structures for High Power rf Tubes”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1190-1193.
- O. Azuma, H. Mizuno, and S. Tokumoto, “High Power Operation Results of the X-Band SLED System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1202-1205.
- D. Demetriadou, A. Abramov, G. Iadarola, and F. Van der Veken, “Tools for integrated simulation of collimation processes in Xsuite”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA066, pp. 2801-2804.
- N. Banerjee et al., “Electron Cooling Experiment for Proton Beams with Intense Space-Charge in IOTA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2395-2398.
- S. Döbert et al., “Bunch Length Measurements in CTF3”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP082, pp. 588-590.
Back to search