Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. D. Farkas, C. J. Kruse, G. A. Loew, and R. A. McConnell, “Design and Performance of the SLAC RF Drive System”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 223-229.
[n] D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
[n] R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1916-1919.
[n] T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
[n] C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710.
[n] S. Sievers et al., “Retreatment of European XFEL Series Cavities at DESY as Part of the Repair of European XFEL Accelerating Modules”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 384-387. doi:10.18429/JACoW-LINAC2018-TUPO028
[n] J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482.
[n] K. Junck et al., “Commissioning and First Operational Experience of the 400 MeV linac at Fermilab”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 751-754.
[n] A. Schnase, H. Meuth, and H. Rongen, “A Digital Synthesizer and Phase Control System for RF-Acceleration in COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1220-1223.
[n] C. G. Trahern et al., “Relational Databases for RHIC Design and Control”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1806-1809.
[n] M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
[n] A. D. Yeremian, C. Adolphsen, J. Chan, G. DeContreras, K. Fant, and C. D. Nantista, “LCLS-II High Power RF System Overview and Progress”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB012, pp. 562-565.
[n] C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
[n] P. Gladkikh, E. V. Bulyak, T. Omori, V. A. Skomorokhov, and J. Urakawa, “Gamma-Ray Source for Nuclear Resonance Fluorescence Based on Compton Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA038, pp. 154-156.
[n] V. Balakin et al., “Experimental Results from a Microwave Cavity Beam Position Monitor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAR2, pp. 461-464.
[n] W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
[n] F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088.
[n] K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703.
[n] Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
[n] D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
[n] J. R. Zhang, Y. L. Chi, J. Lei, H. Wang, X. Wang, and S. Shu, “Design of a C-band Travelling-wave Accelerating Structure at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4196-4199. doi:10.18429/JACoW-IPAC2017-THPIK045
[n] A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
[n] M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2348-2351.
[n] J. Kewisch et al., “Model for RHIC Ramp Controls”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1815-1818.
[n] S. Poppi et al., “DISCOS Updates”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 994-996. doi:10.18429/JACoW-ICALEPCS2021-FRAL02
[n] M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
[n] J. C. Dooling, W. Berg, H.-D. Nuhn, A. F. Pietryla, and B. X. Yang, “Simulations of the Beam Loss Monitor System for the LCLS Undulator Beamline”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP002, pp. 3435-3437.
[n] W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
[n] M. Yadav et al., “Optimization of the Gain Medium Delivery System for an X-Ray Laser Oscillator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 524-527. doi:10.18429/JACoW-IPAC2021-MOPAB150
[n] P. Yuan et al., “Laser Evaporated Aluminium in ECR2 Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-10, pp. 430-432.
[n] J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
[n] J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
[n] H. Oikawa, K. Enami, H. Hayano, H. Inoue, and T. Higashiguchi, “Fabrication of Nb Mushroom Shaped Cavity for Evaluation of Multi-layer Thin-film Superconductor”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 454-457. doi:10.18429/JACoW-LINAC2018-TUPO053
[n] M. S. de Jong and E. A. Heighway, “A First Order Space Charge Option for TRANSOPTR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2666-2669.
[n] J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
[n] A. Lakatos, J. Pozimski, O. Meusel, A. Jakob, and H. Klein, “Study of Space Charge Compensated LEBT for ESS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA90, pp. 1288-1290.
[n] P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
[n] M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1379-1382. doi:10.18429/JACoW-IPAC2024-TUPG57
[n] T. Iwashita et al., “Induction Acceleration System for KEK Digital Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC051, pp. 573-575.
[n] T. E. Plawski, R. Bachimanchi, S. Higgins, C. Hovater, J. Latshaw, and C. I. Mounts, “First SELAP Algorithm Operational Experience of the New LLRF 3.0 RF Control System”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 795-797. doi:10.18429/JACoW-LINAC2022-THPOPA24
[n] L. L. Reginato et al., “Advanced Test Accelerator (ATA) Pulse Power Technology Development”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2758-2761.
[n] Y. Chung, D. Barr, M. Borland, G. Decker, K. Kim, and J. Kirchman, “Development of GUS for Control Applications at the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1794-1797.
[n] J. Tang, J. F. Chen, and Y. Zou, “Momentum Collimation in a High-intensity Compact Rapid Cycling Proton Synchrotron”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD66, pp. 254-258.
[n] Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 986-989.
[n] L. Rossa and M. Brendike, “EPICS Integration for Rapid Control Prototyping Hardware from Speedgoat”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1317-1321. doi:10.18429/JACoW-ICALEPCS2023-THPDP013
[n] D. A. Gray, “The Operational Experience with Nimrod”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 743-749.
[n] G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 794-797.
[n] W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
[n] H. S. Kang, E. H. Lee, and J. Choi, “A GUI for Slow Orbit Feedback Using MATLAB”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP555, pp. XX-XX.
[n] Z. Hazami, F. P?®rez, A. Salom, and P. Solans, “Development of a 1.5 GHz, 1 KW Solid State Power Amplifier for 3rd Harmonic System of the Alba Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4240-4243. doi:10.18429/JACoW-IPAC2019-THPTS059
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1825-1826.
[n] P. M. Hanlet, “Status of Mice Step IV”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1562-1564. doi:10.18429/JACoW-IPAC2016-TUPMY010
[n] E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2068-2071. doi:10.18429/JACoW-IPAC2024-WEPC47
[n] B. Lindstrom et al., “High Luminosity LHC collimation system performance for different optics configurations”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 663-666. doi:10.18429/JACoW-IPAC2025-MOPS029
[n] P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
[n] M. Eguiraun et al., “Taranta, the No-Code Web Dashboard in Production”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1017-1022. doi:10.18429/JACoW-ICALEPCS2021-FRAR01
[n] U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
[n] N. Yu. Muchnoi, “FCC-ee Beam Energy Measurement Suggestion”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SUT1A3, pp. 230-232.
[n] M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
[n] Y. D. Joo et al., “RF Accelerating Voltage of PLS-II Superconducting RF System for Stable Top-up Operation with Beam Current of 400 mA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3015-3017. doi:10.18429/JACoW-IPAC2015-WEPMN039
[n] D. J. Clark, “Recent Progress in Ion Sources and Pre-Accelerators”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-1, pp. 409-419.
[n] E. Paoloni, “Interaction Region Magnets”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT3B2, pp. 130-133.
[n] H. Bui et al., “Feedback Controller Development for the APS-MBA Upgrade”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 203-205. doi:10.18429/JACoW-IBIC2017-TUPCF04
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
[n] R. Fabris and P. Tosolini, “Test Results of the 8.35 kA, 15 kV, 10 pps Pulser for the Elettra Kickers”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1333-1336.
[n] S. C. Zhang et al., “Development of High Brightness Injector at NSRL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP101, pp. 605-607.
[n] J. J. Kritzinger, R. E. F. Fenemore, G. Hardman, M. J. van Niekerk, and A. H. Botha, “A Wide-Range Radio-Frequency System for an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J11, pp. 373-376.
[n] M. B. Shrader, D. H. Preist, and R. N. Tornoe, “High Power CW Klystrode[registered] Amplifier for 267 MHz”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1103-1106.
[n] I. Ben-Zvi, J. F. Crawford, and J. P. Turneaure, “Electron Multiplication in Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 54-59.
[n] J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
[n] G. Stancari et al., “Undulator radiation of single electrons: coherence length and quantum-optical properties”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 300-303. doi:10.18429/JACoW-IPAC2024-MOPG06
[n] P. Suominen, T. Stora, J. Medard, and P. Sortais, “Ionization Efficiency of a COMIC Ion Source Equipped With a Quartz Plasma Chamber”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT006, pp. 51-53.
[n] F. Fernandez, F. Perez, and M. Pont, “Dismantle, assembly and installation plans for the ALBA II upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1217-1219. doi:10.18429/JACoW-IPAC2024-TUPG01
[n] X. Yin et al., “Development of CW Heavy Ion Linac at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 326-328. doi:10.18429/JACoW-LINAC2018-TUPO003
[n] P. Yuan et al., “The Preliminary Explanation of a New Working Model on 10 GHz ECR2 Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-02, pp. 402-404.
[n] ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 496-499. doi:10.18429/JACoW-IBIC2022-WEP38
[n] J. Hinkson, G. Behrsing, E. Hazelton, W. Hearn, and H. Lancaster, “A New, Rugged, High Power Cockcroft-Walton Power Supply”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2961-2964.
[n] T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
[n] M. Wiseman et al., “Jefferson Lab IR FEL Cryomodule Modifications and Test Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P035, pp. 3108-3110.
[n] P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
[n] T. Bohl et al., “Synchro-betatron Resonances in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1612-1615.
[n] K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 809-814.
[n] P. Colestock, J. Griffin, G. Jackson, C. Jensen, J. Lackey, and X. Lu, “An Investigation of the Source of a Low-Q, Low-frequency Impedance Disrupting Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1740-1743.
[n] R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
[n] T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2243-2246.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. D. Farkas, C. J. Kruse, G. A. Loew, and R. A. McConnell, “Design and Performance of the SLAC RF Drive System”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 223-229.
- D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
- R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1916-1919.
- T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
- C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 707-710.
- S. Sievers et al., “Retreatment of European XFEL Series Cavities at DESY as Part of the Repair of European XFEL Accelerating Modules”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 384-387.
- J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 479-482.
- K. Junck et al., “Commissioning and First Operational Experience of the 400 MeV linac at Fermilab”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 751-754.
- A. Schnase, H. Meuth, and H. Rongen, “A Digital Synthesizer and Phase Control System for RF-Acceleration in COSY”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1220-1223.
- C. G. Trahern et al., “Relational Databases for RHIC Design and Control”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1806-1809.
- M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
- A. D. Yeremian, C. Adolphsen, J. Chan, G. DeContreras, K. Fant, and C. D. Nantista, “LCLS-II High Power RF System Overview and Progress”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB012, pp. 562-565.
- C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
- P. Gladkikh, E. V. Bulyak, T. Omori, V. A. Skomorokhov, and J. Urakawa, “Gamma-Ray Source for Nuclear Resonance Fluorescence Based on Compton Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA038, pp. 154-156.
- V. Balakin et al., “Experimental Results from a Microwave Cavity Beam Position Monitor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAR2, pp. 461-464.
- W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
- F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3085-3088.
- K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703.
- Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
- D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
- J. R. Zhang, Y. L. Chi, J. Lei, H. Wang, X. Wang, and S. Shu, “Design of a C-band Travelling-wave Accelerating Structure at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4196-4199.
- A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
- M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2348-2351.
- J. Kewisch et al., “Model for RHIC Ramp Controls”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1815-1818.
- S. Poppi et al., “DISCOS Updates”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 994-996.
- M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
- J. C. Dooling, W. Berg, H.-D. Nuhn, A. F. Pietryla, and B. X. Yang, “Simulations of the Beam Loss Monitor System for the LCLS Undulator Beamline”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP002, pp. 3435-3437.
- W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
- M. Yadav et al., “Optimization of the Gain Medium Delivery System for an X-Ray Laser Oscillator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 524-527.
- P. Yuan et al., “Laser Evaporated Aluminium in ECR2 Ion Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-10, pp. 430-432.
- J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
- J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
- H. Oikawa, K. Enami, H. Hayano, H. Inoue, and T. Higashiguchi, “Fabrication of Nb Mushroom Shaped Cavity for Evaluation of Multi-layer Thin-film Superconductor”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 454-457.
- M. S. de Jong and E. A. Heighway, “A First Order Space Charge Option for TRANSOPTR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2666-2669.
- J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
- A. Lakatos, J. Pozimski, O. Meusel, A. Jakob, and H. Klein, “Study of Space Charge Compensated LEBT for ESS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA90, pp. 1288-1290.
- P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
- M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG57, pp. 1379-1382.
- T. Iwashita et al., “Induction Acceleration System for KEK Digital Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC051, pp. 573-575.
- T. E. Plawski, R. Bachimanchi, S. Higgins, C. Hovater, J. Latshaw, and C. I. Mounts, “First SELAP Algorithm Operational Experience of the New LLRF 3.0 RF Control System”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 795-797.
- L. L. Reginato et al., “Advanced Test Accelerator (ATA) Pulse Power Technology Development”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2758-2761.
- Y. Chung, D. Barr, M. Borland, G. Decker, K. Kim, and J. Kirchman, “Development of GUS for Control Applications at the Advanced Photon Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1794-1797.
- J. Tang, J. F. Chen, and Y. Zou, “Momentum Collimation in a High-intensity Compact Rapid Cycling Proton Synchrotron”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD66, pp. 254-258.
- Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 986-989.
- L. Rossa and M. Brendike, “EPICS Integration for Rapid Control Prototyping Hardware from Speedgoat”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP013, pp. 1317-1321.
- D. A. Gray, “The Operational Experience with Nimrod”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 743-749.
- G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 794-797.
- W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
- H. S. Kang, E. H. Lee, and J. Choi, “A GUI for Slow Orbit Feedback Using MATLAB”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP555, pp. XX-XX.
- Z. Hazami, F. P?®rez, A. Salom, and P. Solans, “Development of a 1.5 GHz, 1 KW Solid State Power Amplifier for 3rd Harmonic System of the Alba Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4240-4243.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1825-1826.
- P. M. Hanlet, “Status of Mice Step IV”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1562-1564.
- E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC47, pp. 2068-2071.
- B. Lindstrom et al., “High Luminosity LHC collimation system performance for different optics configurations”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS029, pp. 663-666.
- P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
- M. Eguiraun et al., “Taranta, the No-Code Web Dashboard in Production”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 1017-1022.
- U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
- N. Yu. Muchnoi, “FCC-ee Beam Energy Measurement Suggestion”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SUT1A3, pp. 230-232.
- M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
- Y. D. Joo et al., “RF Accelerating Voltage of PLS-II Superconducting RF System for Stable Top-up Operation with Beam Current of 400 mA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3015-3017.
- D. J. Clark, “Recent Progress in Ion Sources and Pre-Accelerators”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-1, pp. 409-419.
- E. Paoloni, “Interaction Region Magnets”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT3B2, pp. 130-133.
- H. Bui et al., “Feedback Controller Development for the APS-MBA Upgrade”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 203-205.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
- R. Fabris and P. Tosolini, “Test Results of the 8.35 kA, 15 kV, 10 pps Pulser for the Elettra Kickers”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1333-1336.
- S. C. Zhang et al., “Development of High Brightness Injector at NSRL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP101, pp. 605-607.
- J. J. Kritzinger, R. E. F. Fenemore, G. Hardman, M. J. van Niekerk, and A. H. Botha, “A Wide-Range Radio-Frequency System for an 8 MeV Injector Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J11, pp. 373-376.
- M. B. Shrader, D. H. Preist, and R. N. Tornoe, “High Power CW Klystrode[registered] Amplifier for 267 MHz”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1103-1106.
- I. Ben-Zvi, J. F. Crawford, and J. P. Turneaure, “Electron Multiplication in Cavities”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 54-59.
- J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
- G. Stancari et al., “Undulator radiation of single electrons: coherence length and quantum-optical properties”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG06, pp. 300-303.
- P. Suominen, T. Stora, J. Medard, and P. Sortais, “Ionization Efficiency of a COMIC Ion Source Equipped With a Quartz Plasma Chamber”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT006, pp. 51-53.
- F. Fernandez, F. Perez, and M. Pont, “Dismantle, assembly and installation plans for the ALBA II upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG01, pp. 1217-1219.
- X. Yin et al., “Development of CW Heavy Ion Linac at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 326-328.
- P. Yuan et al., “The Preliminary Explanation of a New Working Model on 10 GHz ECR2 Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-02, pp. 402-404.
- ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 496-499.
- J. Hinkson, G. Behrsing, E. Hazelton, W. Hearn, and H. Lancaster, “A New, Rugged, High Power Cockcroft-Walton Power Supply”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2961-2964.
- T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
- M. Wiseman et al., “Jefferson Lab IR FEL Cryomodule Modifications and Test Results”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P035, pp. 3108-3110.
- P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
- T. Bohl et al., “Synchro-betatron Resonances in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1612-1615.
- K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 809-814.
- P. Colestock, J. Griffin, G. Jackson, C. Jensen, J. Lackey, and X. Lu, “An Investigation of the Source of a Low-Q, Low-frequency Impedance Disrupting Bunch Coalescing in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1740-1743.
- R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
- T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2243-2246.
Back to search