Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Adelmann, S. Adam, R. D?Âlling, M. Pedrozzi, J.-Y. Raguin, and P. Schmelzbach, “Beam Dynamic Studies of the 72 MeV Beamline with a 'Super Buncher'”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT048, pp. 1945-1947.
[n] B. Urbaniec, L. Burdzanowski, and S. G. Gennaro, “Developing Modern High-Level Controls APIs”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1145-1149. doi:10.18429/JACoW-ICALEPCS2023-TH2AO04
[n] Y. Yamamoto et al., “Stable Beam Operation at 33 MV/m in STF-2 Cryomodules at KEK”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 382. doi:10.18429/JACoW-SRF2021-TUPFAV003
[n] C. Markovits, “The 870 keV High Intensity Proton Beam Transfer Line for the Injector II Cyclotron of SIN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1954-1957.
[n] M. Reiser, P. Loschialpo, W. Namkung, J. Suter, and J. D. Lawson, “Experimental Studies of Electron Beam Focusing with Solenoid Lenses Near the Space Charge Limit”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G103, pp. 235-238.
[n] B. Berkes, “Solution of Potential Problems for Variable Permeability Materials by Computer Technique”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E03, pp. XX-XX.
[n] E. Metral et al., “Transverse Impedance of LHC Collimators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAC03, pp. 2003-2005.
[n] W. P. Johnson, “Status of the University of Maryland Cyclotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 268-272.
[n] M. Reiser et al., “The High-Current Electron Beam Transport Experiment at the University of Maryland”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0007, pp. 309-311.
[n] P. A. Schmelzbach, “Production and Uses of Heavy Ions Beams at the PSI Philips Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-09, pp. 48-51.
[n] R. M. Lill, J. T. Collins, G. Decker, L. Erwin, J. Z. Xu, and B. X. Yang, “Studies of APS Storage Ring Vacuum Chamber Thermal Mechanical Effects and their Impact on Beam Stability”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM050, pp. 265-268.
[n] B. Buonomo and L. G. Foggetta, “DANE LINAC: Beam Diagnostics and Outline of the Last Improvements”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1549-1551. doi:10.18429/JACoW-IPAC2015-TUPWA057
[n] Y. Shoji, “Analytical Formula for the Transient Bunch Lengthening by a Betatron Motion along Bending Sections”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD089, pp. 4494-4496.
[n] L. R. Doolittle et al., “Plans for Precision RF Controls for FERMI@ELETTRA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN116, pp. 2310-2312.
[n] L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
[n] I. Vasserman, B. Berkes, J. Kvitkovitc, and J. Z. Xu, “Compensation of the Planar Hall Effect Voltage Using a New Two-Sensor Hall Probe Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP062, pp. 2404-2406.
[n] L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
[n] F. Ehm, “Running a Reliable Messaging Infrastructure for CERN's Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN006, pp. 724-727.
[n] T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
[n] M. Borland, S. J. Pasky, N. Sereno, R. M. Lill, and L. Erwin, “Linac Automated Beam Phase Control System”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP001, pp. 241-243.
[n] B. Copy et al., “Protecting Your Controls Infrastructure Supply Chain”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 196-200. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO03
For LaTeX
Use Complete Form
For BibTeX
References
- A. Adelmann, S. Adam, R. D?Âlling, M. Pedrozzi, J.-Y. Raguin, and P. Schmelzbach, “Beam Dynamic Studies of the 72 MeV Beamline with a 'Super Buncher'”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT048, pp. 1945-1947.
- B. Urbaniec, L. Burdzanowski, and S. G. Gennaro, “Developing Modern High-Level Controls APIs”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO04, pp. 1145-1149.
- Y. Yamamoto et al., “Stable Beam Operation at 33 MV/m in STF-2 Cryomodules at KEK”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 382.
- C. Markovits, “The 870 keV High Intensity Proton Beam Transfer Line for the Injector II Cyclotron of SIN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1954-1957.
- M. Reiser, P. Loschialpo, W. Namkung, J. Suter, and J. D. Lawson, “Experimental Studies of Electron Beam Focusing with Solenoid Lenses Near the Space Charge Limit”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G103, pp. 235-238.
- B. Berkes, “Solution of Potential Problems for Variable Permeability Materials by Computer Technique”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E03, pp. XX-XX.
- E. Metral et al., “Transverse Impedance of LHC Collimators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOAC03, pp. 2003-2005.
- W. P. Johnson, “Status of the University of Maryland Cyclotron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 268-272.
- M. Reiser et al., “The High-Current Electron Beam Transport Experiment at the University of Maryland”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0007, pp. 309-311.
- P. A. Schmelzbach, “Production and Uses of Heavy Ions Beams at the PSI Philips Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-09, pp. 48-51.
- R. M. Lill, J. T. Collins, G. Decker, L. Erwin, J. Z. Xu, and B. X. Yang, “Studies of APS Storage Ring Vacuum Chamber Thermal Mechanical Effects and their Impact on Beam Stability”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM050, pp. 265-268.
- B. Buonomo and L. G. Foggetta, “DANE LINAC: Beam Diagnostics and Outline of the Last Improvements”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1549-1551.
- Y. Shoji, “Analytical Formula for the Transient Bunch Lengthening by a Betatron Motion along Bending Sections”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD089, pp. 4494-4496.
- L. R. Doolittle et al., “Plans for Precision RF Controls for FERMI@ELETTRA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN116, pp. 2310-2312.
- L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
- I. Vasserman, B. Berkes, J. Kvitkovitc, and J. Z. Xu, “Compensation of the Planar Hall Effect Voltage Using a New Two-Sensor Hall Probe Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP062, pp. 2404-2406.
- L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
- F. Ehm, “Running a Reliable Messaging Infrastructure for CERN's Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN006, pp. 724-727.
- T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
- M. Borland, S. J. Pasky, N. Sereno, R. M. Lill, and L. Erwin, “Linac Automated Beam Phase Control System”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP001, pp. 241-243.
- B. Copy et al., “Protecting Your Controls Infrastructure Supply Chain”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4BCO03, pp. 196-200.
Back to search