Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Calaga et al., “Status of LHC Crab Cavity Simulations and Beam Studies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4RAC02, pp. 85-87.
[n] S. Zander, F. Frommberger, P. Haenisch, W. Hillert, and B. Neff, “A New Diagnostic Beamline at ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR011, pp. 795-797.
[n] R. Kapeller, C. E. Higgs, R. A. Krempaska, and H. Lutz, “From Real to Virtual - How to Provide a High-avaliblity Computer Server Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THMIB03, pp. 1076-1078.
[n] S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
[n] S. H. Mirza, B. Dursun, H. T. Duhme, H. Schlarb, S. Pfeiffer, and S. Jablonski, “Lattice-based simulations for the fast orbit feedback system of PETRA IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3989-3991. doi:10.18429/JACoW-IPAC2023-THPA022
[n] Z. C. Liu, J. Gao, and Z. Q. Li, “Inspection Camera for Superconducting Cavity at IHEP”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP170, pp. 1808-1809.
[n] D. Carter and T. Nishikawa, “Aperture and Cell Size Effects on Shunt Impedance of Alternating Periodic Structures”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-04, pp. 104-108.
[n] L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
[n] S. Zander, F. Frommberger, W. Hillert, and D. Proft, “Simultaneous Measurement of Emittance at the Storage Ring and the External Beamlines of ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR010, pp. 792-794.
[n] M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
[n] R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
[n] P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
[n] H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
[n] S.-C. Kim, A. Ahn, J. M. Kim, K. R. Kim, C. D. Park, and J. C. Yoon, “Magnet Power Supplies Performance at the PLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3558-3560. doi:10.18429/JACoW-IPAC2016-THPMW011
[n] R. Ferdinand, J.-M. Lagniel, P. Mattei, and S. Nath, “Optimization of RFQ Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23G, pp. 1106-1108.
[n] S. Lederer, K. Floettmann, L. Lilje, and N. Plambeck, “The REGAE Accelerator Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2493-2495. doi:10.18429/JACoW-IPAC2018-WEPMF055
[n] Z. Li et al., “Towards Simulation of Electromagnetics and Beam Physics at the Petascale”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZBC01, pp. 889-893.
[n] X. Wu, D. Gorelov, T. Grimm, W. Hartung, F. Marti, and R. C. York, “The Misalignment and RF Error Analysis for The RIA Driver Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO441, pp. 133-135.
[n] J. L. Brito Neto, G. B. M. Bruno, S. R. Marques, L. M. Russo, and D. O. Tavares, “A MicroTCA.4 Timing Receiver for the Sirius Timing System”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 375-378. doi:10.18429/JACoW-IBIC2018-WEPA01
[n] A. A. Aksoy et al., “Conceptual Design of a X-FEL Facility using CLIC X-band Accelerating Structure”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2914-2917. doi:10.18429/JACoW-IPAC2014-THPRO025
[n] J. Kim et al., “An Integrated Femtosecond Timing Distribution System for XFELs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOPA03, pp. 2744-2746.
[n] K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
[n] L. Xiao et al., “HOM and LOM Coupler Optimizations for the ILC Crab Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS050, pp. 2457-2459.
[n] R. De Prisco, M. Eshraqi, M. Comunian, F. Grespan, A. Pisent, and A. R. Karlsson, “ESS DTL Status: Redesign and Optimizations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3314-3316. doi:10.18429/JACoW-IPAC2014-THPME041
[n] L. Ge, C. Ko, K. H. Lee, Z. Li, C.-K. Ng, and L. Xiao, “Analyzing Multipacting Problems in Accelerators using ACE3P on High Performance Computers”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOSDI1, pp. 54-58.
[n] P. Brunelle et al., “Experimental Characterization of the Insertion Device Effects on Beam Dynamics at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC048, pp. 2097-2099.
[n] A. Drees, L. Ahrens, R. Fliller III, W. Fu, G. Heppner, and V. Kain, “Abort Gap Studies and Cleaning during RHIC Heavy Ion Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB030, pp. 1685-1687.
[n] J. M. K?â, J. Knobloch, and O. Kugeler, “Simulation of the Thermoelectrically Generated Magnetic Field in a SC Nine-Cell Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 968-970. doi:10.18429/JACoW-IPAC2017-MOPVA048
[n] G. B. M. Bruno et al., “Open Hardware Experience on LNLS' Beam Diagnostics”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 75-79. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO04
[n] H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 463-467. doi:10.18429/JACoW-IBIC2025-TUPMO06
[n] K. A. Brown, L. Ahrens, F. Severino, K. S. Smith, and M. Wilinski, “AGS Booster Beam Position, Tune, and Longitudinal Profile Data Acquisition System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB012, pp. 2441-2443.
[n] T. C. Katsouleas et al., “Positron Beam Propagation in a Meter Long Plasma Channel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB011, pp. 731-733.
[n] Z. C. Liu and J. Gao, “A Green CEPC Using the Power of Nuclear Waste”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT5A2, pp. 49-53.
[n] A. Gerbershagen, A. Andersson, D. Schulte, P. Burrows, and F. O. Ilday, “Specifications of the Distributed Timing System for the CLIC Main Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB045, pp. 273-275.
[n] R. A. Krempaska, A. G. Bertrand, F. Lendzian, and H. Lutz, “High Intensity Proton Accelerator Controls Network Upgrade”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS020, pp. 361-363.
[n] R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
[n] S. P. Virostek, M. A. Green, T. O. Niinikoski, S. Prestemon, and M. S. Zisman, “Progress on the Modeling and Modification of the MICE Superconducting Spectrometer Solenoids”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP173, pp. 1151-1153.
[n] Y. I. Levinsen et al., “Plans for the European Spallation Source Beam Physics Control Software”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3086-3089. doi:10.18429/JACoW-IPAC2016-WEPOY043
[n] P. Kneisel, G. Ciovati, A. Matheisen, J. S. Sekutowicz, W. Singer, and X. Singer, “Development of a Superconducting Connection for Niobium Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS062, pp. 2484-2486.
[n] M. Comunian, F. Grespan, A. Pisent, C. Roncolato, R. De Prisco, and P. Mereu, “PROGRESS ON DTL DESIGN FOR ESS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO024, pp. 3815-3817.
[n] C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
[n] R. K. Reed and J. C. Bell, “Personnel and Machine Protection Systems in The National Ignition Facility (NIF)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA08, pp. 933-936.
[n] K. A. Brown et al., “Status of Slow Extraction of High Intensity Protons from Brookhaven's AGS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE003, pp. 1545-1547.
[n] S. R. Marques, G. B. M. Bruno, L. M. Russo, H. A. Silva, and D. O. Tavares, “Commissioning of the Open Source Sirius BPM Electronics”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 196-203. doi:10.18429/JACoW-IBIC2018-TUOC03
[n] A. Winter, F. O. Ilday, and B. Steffen, “Femtosecond Yb-Doped Fiber Laser System at 1 um of Wavelength with 100-nm Bandwidth and Variable Pulse Structure for Accelerator Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB03, pp. 235-237.
[n] C. J. Gardner et al., “Setup and Performance of the RHIC Injector Accelerators for the 2005 Run with Copper Ions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE029, pp. 2068-2070.
[n] H. J. Zheng et al., “Preliminary Design of CEPC RF Superconducting System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP022, pp. 140-144.
[n] D. Anicic, T. Blumer, I. Jirousek, H. Lutz, and A. Mezger, “Requirements and Solutions for Accelerator Control Systems”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-6, pp. XX-XX.
[n] E. Sombrowski, R. Kammering, and K. R. Rehlich, “A HTML5 Web Interface for JAVA DOOCS Data Display”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1056-1058. doi:10.18429/JACoW-ICALEPCS2015-WEPGF150
[n] J. Choi, H.-S. Kang, J. W. Lee, B. R. Park, and J. C. Yoon, “Developing of SMS Mobile System for the PLS Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA37, pp. 392-394.
[n] M. T. Switka, W. Hillert, M. Schedler, and S. Zander, “Streak Camera Imaging at ELSA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC31, pp. 132-134.
[n] S. P. Virostek, M. A. Green, D. Li, and M. S. Zisman, “Progress on the Fabrication and Testing of the MICE Spectrometer Solenoids”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP070, pp. 292-294.
[n] M. Jonker, H. Schmickler, R. Schmidt, D. Schulte, and M. C. Ross, “Machine Protection Issues and Solutions for Linear Accelerator Complexes”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB091, pp. 1032-1034.
[n] J. Choi, K. M. Ha, H.-S. Kang, E.-H. Lee, J. C. Yoon, and J. W. Lee, “Upgrade of BPM Data Acquisition System Using Reflective Memory at PLS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA16, pp. 348-349.
[n] C. D. Barnes et al., “Improvements for the Third Generation Plasma Wakefield Experiment E-164 at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG044, pp. 1530-1532.
[n] P. Bagley and D. Rubin, “Diagnosis of Transverse Coupling Errors in a Storage Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1301-1304.
[n] S. P. Virostek, M. A. Green, D. Li, and M. S. Zisman, “Progress on the Design and Fabrication of the MICE Spectrometer Solenoids”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS029, pp. 497-499.
[n] P. Sanchez Navarro, “Thermal Contact Conductance in a Typical Silicon Crystal Assembly Found in Particle Accelerators”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 353. doi:10.18429/JACoW-MEDSI2020-THOB01
[n] J. M. Weber, J. C. Bell, M. J. Chin, W. E. Norum, and G. J. Portmann, “Advanced Light Source High Speed Digitizer”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 132-135. doi:10.18429/JACoW-IBIC2020-WEPP16
[n] J. C. Yoon, C. Kim, K. R. Kim, and S. J. Park, “Developing of PBPM Data Acquisition Control System for the PLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP019, pp. 4808-4810.
[n] A. Gerbershagen, A. Andersson, D. Schulte, P. Burrows, and F. O. Ilday, “Specifications of the Distributed Timing System for the CLIC Main Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB008, pp. 16-18.
[n] R. De Prisco and D. C. Plostinar, “Beam Dynamics Studies of the ESS LINAC Using a New Multicell Cavity Model”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 870-873. doi:10.18429/JACoW-IPAC2018-TUPAF063
[n] O. V. Chubar, C. Benabderrahmane, J. Chavanne, P. Elleaume, O. Marcouill?®, and F. Marteau, “Application of Finite Volume Integral Approach to Computing of 3D Magnetic Fields Created by Distributed Iron-dominated Electromagnet Structures”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF033, pp. 1675-1677.
[n] S. Robertson, “A Plasma Lens and Accelerator Based Upon Magnetically Driven Charge Separation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2641-2644.
[n] C. A. Valerio, R. Scrivens, and N. Chauvin, “Space Charge Compensation in the Linac4 LEBT for Three Injected Gas Types”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP036, pp. 510-512.
[n] R. A. Washington, “Development of a New Timing System for ISIS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1247-1249. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO23
[n] L. Ahrens, K. Brown, J. W. Glenn, T. Roser, N. Tsoupas, and W. van Asselt, “AGS Resonant Extraction with High Intensity Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP140, pp. 3291-3293.
[n] S. Jabłoński et al., “Conceptual Design of the Transverse Multi-Bunch Feedback for the Synchrotron Radiation Source PETRA IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 488-491. doi:10.18429/JACoW-IBIC2022-WEP36
[n] G. Benedetti, M. Carlà, O. Blanco-García, Z. Martí, and F. Perez, “Status of lattice studies for ALBA-II”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5034, unpublished.
[n] H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n] T. Higo et al., “Status of C-band Accelerating Section Development at the KEKB Injector Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP087, pp. 788-790.
[n] Yu. P. Bouzouloukov et al., “Beam Transport and Special Undulators Designed for High Power FELs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP106G, pp. 742-744.
[n] M. Othman, D. Bizzozero, C.-K. Ng, and L. Xiao, “Progress of the nonlinear time-domain finite element solver implementation in the electromagnetic code ACE3P”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS28, unpublished.
[n] C. Gardner, L. Ahrens, T. Roser, and K. Zeno, “Injection of Gold Ions in the AGS Booster with Linear Coupling”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA85, pp. 1276-1278.
[n] M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the IPAC'26, Deauville, France, May 2026, paper MOV7004, unpublished.
[n] M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS67, unpublished.
[n] A. Amjad, J.-M. Christmann, S. H. Mirza, S. Pfeiffer, and H. Schlarb, “Test Bench Design and First Measurement Results for the PETRA IV FOFB Actuator Chain”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6109, unpublished.
[n] M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n] M. Mayerhofer, V. Bencini, G. Dollinger, and M. A. Sammer, “A Carbon Minibeam Irradiation Facility Concept”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2947-2950. doi:10.18429/JACoW-IPAC2022-THPOMS006
[n] J. Y. Huang, J.-H. Kim, J.-W. Lee, M. K. Park, and S. C. Won, “PLS Beam Position Measurement and Feedback System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 427-430. doi:10.18429/JACoW-ICALEPCS1991-S12FC05
[n] V. Schuster, H. Winter, S. Brenner, G. Dollinger, M. Mayerhofer, and V. Nedeljkovic-Groha, “Experimental validation of an additively manufactured 1.3 GHz radio frequency cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7171, unpublished.
[n] K. A. Brown et al., “Measurements and Modeling of Eddy Current Effects in BNL's AGS Booster”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH063, pp. 2068-2070.
[n] D. O. Tavares, G. B. M. Bruno, S. R. Marques, L. M. Russo, and H. A. Silva, “MicroTCA.4 at Sirius and a Closer Look into the Community”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 461-470. doi:10.18429/JACoW-IBIC2019-WEBO02
[n] S. Pfeiffer et al., “LLRF Control and Synchronization System of the ARES Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3347-3350. doi:10.18429/JACoW-IPAC2021-WEPAB294
[n] J. Arnold et al., “Energy Loss of Proton and Lead Beams in the CERN-SPS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V036, pp. 1813-1815.
[n] O. V. Chubar and N. V. Smolyakov, “Generation of Intensive Long-Wavelength Edge Radiation in High-Energy Electron Storage Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1626-1629.
[n] Q. Zhao et al., “Beam Simulations for the MSU-RIA Driver Linac Using IMPACT Code”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP085, pp. 457-459.
[n] B. Dursun et al., “PETRA-IV FOFB System Integration Test Setup”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1428-1432. doi:10.18429/JACoW-ICALEPCS2025-THCG005
[n] C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA059, unpublished.
[n] W. Hartung et al., “Status and Plans for the Facility for Rare Isotope Beams at Michigan State University”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP046, pp. 160-162.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Calaga et al., “Status of LHC Crab Cavity Simulations and Beam Studies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4RAC02, pp. 85-87.
- S. Zander, F. Frommberger, P. Haenisch, W. Hillert, and B. Neff, “A New Diagnostic Beamline at ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR011, pp. 795-797.
- R. Kapeller, C. E. Higgs, R. A. Krempaska, and H. Lutz, “From Real to Virtual - How to Provide a High-avaliblity Computer Server Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THMIB03, pp. 1076-1078.
- S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
- S. H. Mirza, B. Dursun, H. T. Duhme, H. Schlarb, S. Pfeiffer, and S. Jablonski, “Lattice-based simulations for the fast orbit feedback system of PETRA IV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA022, pp. 3989-3991.
- Z. C. Liu, J. Gao, and Z. Q. Li, “Inspection Camera for Superconducting Cavity at IHEP”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP170, pp. 1808-1809.
- D. Carter and T. Nishikawa, “Aperture and Cell Size Effects on Shunt Impedance of Alternating Periodic Structures”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-04, pp. 104-108.
- L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
- S. Zander, F. Frommberger, W. Hillert, and D. Proft, “Simultaneous Measurement of Emittance at the Storage Ring and the External Beamlines of ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR010, pp. 792-794.
- M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
- R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
- P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
- H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
- S.-C. Kim, A. Ahn, J. M. Kim, K. R. Kim, C. D. Park, and J. C. Yoon, “Magnet Power Supplies Performance at the PLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3558-3560.
- R. Ferdinand, J.-M. Lagniel, P. Mattei, and S. Nath, “Optimization of RFQ Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23G, pp. 1106-1108.
- S. Lederer, K. Floettmann, L. Lilje, and N. Plambeck, “The REGAE Accelerator Vacuum System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2493-2495.
- Z. Li et al., “Towards Simulation of Electromagnetics and Beam Physics at the Petascale”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZBC01, pp. 889-893.
- X. Wu, D. Gorelov, T. Grimm, W. Hartung, F. Marti, and R. C. York, “The Misalignment and RF Error Analysis for The RIA Driver Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO441, pp. 133-135.
- J. L. Brito Neto, G. B. M. Bruno, S. R. Marques, L. M. Russo, and D. O. Tavares, “A MicroTCA.4 Timing Receiver for the Sirius Timing System”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 375-378.
- A. A. Aksoy et al., “Conceptual Design of a X-FEL Facility using CLIC X-band Accelerating Structure”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2914-2917.
- J. Kim et al., “An Integrated Femtosecond Timing Distribution System for XFELs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOPA03, pp. 2744-2746.
- K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
- L. Xiao et al., “HOM and LOM Coupler Optimizations for the ILC Crab Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS050, pp. 2457-2459.
- R. De Prisco, M. Eshraqi, M. Comunian, F. Grespan, A. Pisent, and A. R. Karlsson, “ESS DTL Status: Redesign and Optimizations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3314-3316.
- L. Ge, C. Ko, K. H. Lee, Z. Li, C.-K. Ng, and L. Xiao, “Analyzing Multipacting Problems in Accelerators using ACE3P on High Performance Computers”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper MOSDI1, pp. 54-58.
- P. Brunelle et al., “Experimental Characterization of the Insertion Device Effects on Beam Dynamics at SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC048, pp. 2097-2099.
- A. Drees, L. Ahrens, R. Fliller III, W. Fu, G. Heppner, and V. Kain, “Abort Gap Studies and Cleaning during RHIC Heavy Ion Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB030, pp. 1685-1687.
- J. M. K?â, J. Knobloch, and O. Kugeler, “Simulation of the Thermoelectrically Generated Magnetic Field in a SC Nine-Cell Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 968-970.
- G. B. M. Bruno et al., “Open Hardware Experience on LNLS' Beam Diagnostics”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 75-79.
- H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 463-467.
- K. A. Brown, L. Ahrens, F. Severino, K. S. Smith, and M. Wilinski, “AGS Booster Beam Position, Tune, and Longitudinal Profile Data Acquisition System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB012, pp. 2441-2443.
- T. C. Katsouleas et al., “Positron Beam Propagation in a Meter Long Plasma Channel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB011, pp. 731-733.
- Z. C. Liu and J. Gao, “A Green CEPC Using the Power of Nuclear Waste”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT5A2, pp. 49-53.
- A. Gerbershagen, A. Andersson, D. Schulte, P. Burrows, and F. O. Ilday, “Specifications of the Distributed Timing System for the CLIC Main Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB045, pp. 273-275.
- R. A. Krempaska, A. G. Bertrand, F. Lendzian, and H. Lutz, “High Intensity Proton Accelerator Controls Network Upgrade”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS020, pp. 361-363.
- R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
- S. P. Virostek, M. A. Green, T. O. Niinikoski, S. Prestemon, and M. S. Zisman, “Progress on the Modeling and Modification of the MICE Superconducting Spectrometer Solenoids”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP173, pp. 1151-1153.
- Y. I. Levinsen et al., “Plans for the European Spallation Source Beam Physics Control Software”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3086-3089.
- P. Kneisel, G. Ciovati, A. Matheisen, J. S. Sekutowicz, W. Singer, and X. Singer, “Development of a Superconducting Connection for Niobium Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS062, pp. 2484-2486.
- M. Comunian, F. Grespan, A. Pisent, C. Roncolato, R. De Prisco, and P. Mereu, “PROGRESS ON DTL DESIGN FOR ESS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO024, pp. 3815-3817.
- C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
- R. K. Reed and J. C. Bell, “Personnel and Machine Protection Systems in The National Ignition Facility (NIF)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA08, pp. 933-936.
- K. A. Brown et al., “Status of Slow Extraction of High Intensity Protons from Brookhaven's AGS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE003, pp. 1545-1547.
- S. R. Marques, G. B. M. Bruno, L. M. Russo, H. A. Silva, and D. O. Tavares, “Commissioning of the Open Source Sirius BPM Electronics”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 196-203.
- A. Winter, F. O. Ilday, and B. Steffen, “Femtosecond Yb-Doped Fiber Laser System at 1 um of Wavelength with 100-nm Bandwidth and Variable Pulse Structure for Accelerator Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB03, pp. 235-237.
- C. J. Gardner et al., “Setup and Performance of the RHIC Injector Accelerators for the 2005 Run with Copper Ions”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE029, pp. 2068-2070.
- H. J. Zheng et al., “Preliminary Design of CEPC RF Superconducting System”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP022, pp. 140-144.
- D. Anicic, T. Blumer, I. Jirousek, H. Lutz, and A. Mezger, “Requirements and Solutions for Accelerator Control Systems”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-6, pp. XX-XX.
- E. Sombrowski, R. Kammering, and K. R. Rehlich, “A HTML5 Web Interface for JAVA DOOCS Data Display”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1056-1058.
- J. Choi, H.-S. Kang, J. W. Lee, B. R. Park, and J. C. Yoon, “Developing of SMS Mobile System for the PLS Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA37, pp. 392-394.
- M. T. Switka, W. Hillert, M. Schedler, and S. Zander, “Streak Camera Imaging at ELSA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC31, pp. 132-134.
- S. P. Virostek, M. A. Green, D. Li, and M. S. Zisman, “Progress on the Fabrication and Testing of the MICE Spectrometer Solenoids”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP070, pp. 292-294.
- M. Jonker, H. Schmickler, R. Schmidt, D. Schulte, and M. C. Ross, “Machine Protection Issues and Solutions for Linear Accelerator Complexes”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB091, pp. 1032-1034.
- J. Choi, K. M. Ha, H.-S. Kang, E.-H. Lee, J. C. Yoon, and J. W. Lee, “Upgrade of BPM Data Acquisition System Using Reflective Memory at PLS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA16, pp. 348-349.
- C. D. Barnes et al., “Improvements for the Third Generation Plasma Wakefield Experiment E-164 at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG044, pp. 1530-1532.
- P. Bagley and D. Rubin, “Diagnosis of Transverse Coupling Errors in a Storage Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1301-1304.
- S. P. Virostek, M. A. Green, D. Li, and M. S. Zisman, “Progress on the Design and Fabrication of the MICE Spectrometer Solenoids”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS029, pp. 497-499.
- P. Sanchez Navarro, “Thermal Contact Conductance in a Typical Silicon Crystal Assembly Found in Particle Accelerators”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 353.
- J. M. Weber, J. C. Bell, M. J. Chin, W. E. Norum, and G. J. Portmann, “Advanced Light Source High Speed Digitizer”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 132-135.
- J. C. Yoon, C. Kim, K. R. Kim, and S. J. Park, “Developing of PBPM Data Acquisition Control System for the PLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP019, pp. 4808-4810.
- A. Gerbershagen, A. Andersson, D. Schulte, P. Burrows, and F. O. Ilday, “Specifications of the Distributed Timing System for the CLIC Main Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB008, pp. 16-18.
- R. De Prisco and D. C. Plostinar, “Beam Dynamics Studies of the ESS LINAC Using a New Multicell Cavity Model”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 870-873.
- O. V. Chubar, C. Benabderrahmane, J. Chavanne, P. Elleaume, O. Marcouill?®, and F. Marteau, “Application of Finite Volume Integral Approach to Computing of 3D Magnetic Fields Created by Distributed Iron-dominated Electromagnet Structures”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF033, pp. 1675-1677.
- S. Robertson, “A Plasma Lens and Accelerator Based Upon Magnetically Driven Charge Separation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2641-2644.
- C. A. Valerio, R. Scrivens, and N. Chauvin, “Space Charge Compensation in the Linac4 LEBT for Three Injected Gas Types”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP036, pp. 510-512.
- R. A. Washington, “Development of a New Timing System for ISIS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO23, pp. 1247-1249.
- L. Ahrens, K. Brown, J. W. Glenn, T. Roser, N. Tsoupas, and W. van Asselt, “AGS Resonant Extraction with High Intensity Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP140, pp. 3291-3293.
- S. Jabłoński et al., “Conceptual Design of the Transverse Multi-Bunch Feedback for the Synchrotron Radiation Source PETRA IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 488-491.
- G. Benedetti, M. Carlà, O. Blanco-García, Z. Martí, and F. Perez, “Status of lattice studies for ALBA-II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5034, this conference.
- H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 363-366.
- T. Higo et al., “Status of C-band Accelerating Section Development at the KEKB Injector Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP087, pp. 788-790.
- Yu. P. Bouzouloukov et al., “Beam Transport and Special Undulators Designed for High Power FELs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP106G, pp. 742-744.
- M. Othman, D. Bizzozero, C.-K. Ng, and L. Xiao, “Progress of the nonlinear time-domain finite element solver implementation in the electromagnetic code ACE3P”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS28, unpublished.
- C. Gardner, L. Ahrens, T. Roser, and K. Zeno, “Injection of Gold Ions in the AGS Booster with Linear Coupling”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA85, pp. 1276-1278.
- M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOV7004, this conference.
- M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS67, unpublished.
- A. Amjad, J.-M. Christmann, S. H. Mirza, S. Pfeiffer, and H. Schlarb, “Test Bench Design and First Measurement Results for the PETRA IV FOFB Actuator Chain”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6109, this conference.
- M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM035, pp. 4967-4970.
- M. Mayerhofer, V. Bencini, G. Dollinger, and M. A. Sammer, “A Carbon Minibeam Irradiation Facility Concept”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2947-2950.
- J. Y. Huang, J.-H. Kim, J.-W. Lee, M. K. Park, and S. C. Won, “PLS Beam Position Measurement and Feedback System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S12FC05, pp. 427-430.
- V. Schuster, H. Winter, S. Brenner, G. Dollinger, M. Mayerhofer, and V. Nedeljkovic-Groha, “Experimental validation of an additively manufactured 1.3 GHz radio frequency cavity”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7171, this conference.
- K. A. Brown et al., “Measurements and Modeling of Eddy Current Effects in BNL's AGS Booster”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH063, pp. 2068-2070.
- D. O. Tavares, G. B. M. Bruno, S. R. Marques, L. M. Russo, and H. A. Silva, “MicroTCA.4 at Sirius and a Closer Look into the Community”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 461-470.
- S. Pfeiffer et al., “LLRF Control and Synchronization System of the ARES Facility”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3347-3350.
- J. Arnold et al., “Energy Loss of Proton and Lead Beams in the CERN-SPS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V036, pp. 1813-1815.
- O. V. Chubar and N. V. Smolyakov, “Generation of Intensive Long-Wavelength Edge Radiation in High-Energy Electron Storage Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1626-1629.
- Q. Zhao et al., “Beam Simulations for the MSU-RIA Driver Linac Using IMPACT Code”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP085, pp. 457-459.
- B. Dursun et al., “PETRA-IV FOFB System Integration Test Setup”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1428-1432.
- C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA059, unpublished.
- W. Hartung et al., “Status and Plans for the Facility for Rare Isotope Beams at Michigan State University”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP046, pp. 160-162.
Back to search