Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n] R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4075-4078.
[n] R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896.
[n] M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n] N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 794-804.
[n] I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n] H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761.
[n] M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR31, unpublished.
[n] E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
[n] H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2313-2316.
[n] D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
[n] T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120.
[n] I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n] A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237.
[n] G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n] F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
[n] I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
[n] N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
[n] G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 101-104. doi:10.18429/JACoW-FEL2015-MOP034
[n] M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221.
[n] A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n] J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659.
[n] M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
[n] S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n] R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577.
[n] J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580.
[n] M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-06, pp. 81-88.
[n] M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1006. doi:10.18429/JACoW-ICALEPCS2019-WEMPL005
[n] A. Hofmann and K. W. Robinson, “Measurement of Cross Section of a High-Energy Electron Beam by Means of the X-Ray Portion of the Synchrotron Radiation”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 937-939.
[n] G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468.
[n] J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157.
[n] J.-C. Denard, P. Piot, K. Capek, and E. Feldl, “High Power Beam Profile Monitor with Optical Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P062, pp. 2198-2200.
[n] K. Hanke et al., “Status of the Linac4 Project at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD015, pp. 702-704.
[n] T. Tominaka, M. Okamura, and T. Katayama, “Analytical Field Calculation of Helical Dipole Magnets for RHIC Snake”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P018, pp. 3437-3439.
[n] I. N. Birukov, V. A. Moiseev, and P. N. Ostroumov, “Analysis of the Closed Orbit Distortions in the MMF Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1447-1449.
[n] L. Harwood, G. Biallas, A. Guerra, W. Heilbrunn, and J. Karn, “Magnet Design and Performance for the CEBAF Beam Transport System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1350-1353.
[n] A. Latina et al., “CompactLight Design Study”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 85-88. doi:10.18429/JACoW-FLS2018-WEP1WC02
[n] P. Kneisel and B. Lewis, “Advanced Surface Cleaning Methods - Three Years of Experience with High Pressure Ultrapure Water Rinsing of Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95L02, pp. 311-327.
[n] T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 940-943.
[n] W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2285-2287.
[n] J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX.
[n] W. Jule, R. Chasman, and R. L. Gluckstern, “Band Closing in an Alvarez Type Periodic Structure”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-9, pp. 343-351.
[n] J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974.
[n] J. Schuchman et al., “SXLS Phase II Vacuum System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2316-2319.
[n] L. Felsberger, A. Apollonio, T. Cartier-Michaud, E. Montesinos, J. C. Oliveira, and J. A. Uythoven, “Availability Modeling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2308-2311. doi:10.18429/JACoW-IPAC2021-TUPAB345
[n] K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 736-739.
[n] P. Piot et al., “A Multislit Transverse-Emittance Diagnostic for Space-Charge-Dominated Electron Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P064, pp. 2204-2206.
[n] C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316.
[n] L. Maunoury et al., “Multigan?«: a New Multicharged Ion Source Based on Axisymetric Magnetic Structure”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK05, pp. 37-39.
[n] W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219.
[n] R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
[n] S. P. Kearney, S. Chen, B. Lai, J. Maser, T. Mooney, and D. Shu, “Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 71. doi:10.18429/JACoW-MEDSI2020-MOPC10
[n] J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482.
[n] C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589.
[n] P. Musumeci et al., “Status of the SPARC Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
[n] R. J. England, M. J. Hogan, J. B. Rosenzweig, and G. Travish, “Longitudinal Shaping of Electron Bunches with Applications to the Plasma Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3GBI02, pp. 3105-3105.
[n] D. A. Gray, “The Operational Experience with Nimrod”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 743-749.
[n] G. Danby et al., “Unicell Structure for Superconducting Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1614-1617.
[n] P. Robillard et al., “RF Power Tests and Results of the First Rebuncher for the SPIRAL 2 Driver”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP051, pp. 172-174.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 363-366.
- R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4075-4078.
- R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1893-1896.
- M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM010, pp. 4912-4915.
- N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 794-804.
- I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC11, pp. 329-332.
- H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 758-761.
- M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR31, unpublished.
- E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
- H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2313-2316.
- D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
- T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120.
- I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2910-2913.
- A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 233-237.
- G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1216-1218.
- F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
- I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
- N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
- G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 101-104.
- M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221.
- A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2540-2543.
- J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1655-1659.
- M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
- S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 345.
- R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577.
- J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 576-580.
- M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABC-06, pp. 81-88.
- M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1006.
- A. Hofmann and K. W. Robinson, “Measurement of Cross Section of a High-Energy Electron Beam by Means of the X-Ray Portion of the Synchrotron Radiation”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 937-939.
- G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468.
- J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157.
- J.-C. Denard, P. Piot, K. Capek, and E. Feldl, “High Power Beam Profile Monitor with Optical Transition Radiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P062, pp. 2198-2200.
- K. Hanke et al., “Status of the Linac4 Project at CERN”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD015, pp. 702-704.
- T. Tominaka, M. Okamura, and T. Katayama, “Analytical Field Calculation of Helical Dipole Magnets for RHIC Snake”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P018, pp. 3437-3439.
- I. N. Birukov, V. A. Moiseev, and P. N. Ostroumov, “Analysis of the Closed Orbit Distortions in the MMF Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1447-1449.
- L. Harwood, G. Biallas, A. Guerra, W. Heilbrunn, and J. Karn, “Magnet Design and Performance for the CEBAF Beam Transport System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1350-1353.
- A. Latina et al., “CompactLight Design Study”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 85-88.
- P. Kneisel and B. Lewis, “Advanced Surface Cleaning Methods - Three Years of Experience with High Pressure Ultrapure Water Rinsing of Superconducting Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95L02, pp. 311-327.
- T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 940-943.
- W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2285-2287.
- J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX.
- W. Jule, R. Chasman, and R. L. Gluckstern, “Band Closing in an Alvarez Type Periodic Structure”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-9, pp. 343-351.
- J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3971-3974.
- J. Schuchman et al., “SXLS Phase II Vacuum System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2316-2319.
- L. Felsberger, A. Apollonio, T. Cartier-Michaud, E. Montesinos, J. C. Oliveira, and J. A. Uythoven, “Availability Modeling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2308-2311.
- K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 736-739.
- P. Piot et al., “A Multislit Transverse-Emittance Diagnostic for Space-Charge-Dominated Electron Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P064, pp. 2204-2206.
- C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316.
- L. Maunoury et al., “Multigan?«: a New Multicharged Ion Source Based on Axisymetric Magnetic Structure”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK05, pp. 37-39.
- W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1216-1219.
- R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
- S. P. Kearney, S. Chen, B. Lai, J. Maser, T. Mooney, and D. Shu, “Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 71.
- J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 479-482.
- C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589.
- P. Musumeci et al., “Status of the SPARC Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
- R. J. England, M. J. Hogan, J. B. Rosenzweig, and G. Travish, “Longitudinal Shaping of Electron Bunches with Applications to the Plasma Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH3GBI02, pp. 3105-3105.
- D. A. Gray, “The Operational Experience with Nimrod”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 743-749.
- G. Danby et al., “Unicell Structure for Superconducting Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1614-1617.
- P. Robillard et al., “RF Power Tests and Results of the First Rebuncher for the SPIRAL 2 Driver”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP051, pp. 172-174.
Back to search