Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Taylor, B. G. Chidley, and G. E. McMichael, “Design Recommendations for Low-Energy Components of ESNIT and OMEGA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-17, pp. 651-653.
[n] J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 411-414. doi:10.18429/JACoW-FEL2017-WEC02
[n] S. V. Semenov, A. G. Kobets, S. A. Melnikov, I. N. Meshkov, and A. S. Sergeev, “Commissioning of Electron Cooling System of the NICA Booster Synchrotron”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB03, unpublished.
[n] K. Hatanaka et al., “Present Status of the RCNP Cyclotron Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP016, pp. 78-80.
[n] A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 257-260. doi:10.18429/JACoW-FLS2023-TH4A2
[n] T. von Witzleben et al., “Beam dynamics for concurrent operation of the LHeC and the HL-LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 151-154. doi:10.18429/JACoW-IPAC2023-MOPA054
[n] J. R. Calvey et al., “Advances in Understanding of Ion Effects in Electron Storage Rings”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1267-1272. doi:10.18429/JACoW-IPAC2021-TUXA01
[n] K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2774-2776. doi:10.18429/JACoW-IPAC2023-WEPA051
[n] S. Lee et al., “The Beam Diagnostics System in the J-PARC LINAC”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP74, pp. 441-443.
[n] C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2877-2880. doi:10.18429/JACoW-IPAC2023-WEPA099
[n] M. Brendike et al., “ESRF-Double Crystal Monochromator Prototype - Control Concept”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 777. doi:10.18429/JACoW-ICALEPCS2019-TUCPL05
[n] J. S. Yang, M.-H. Chun, Y. J. Han, S.-H. Nam, and I. H. Yu, “The Experiences of Operation and Performance about the 500 MHz CW Klystrons at the PLS Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF039, pp. 1051-1053.
[n] P.-W. Huang et al., “High brightness electron source development in Tsinghua university”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC78, unpublished.
[n] N. Gandolfo et al., “Fast Tuner Performance for a Double Spoke Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP077, pp. 1034-1036.
[n] S. D. Kolokolchikov, V. Senichev, and E. Syresin, “Magneto-Optical Structure of the NICA Collider With High Critical Energy”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 245-247. doi:10.18429/JACoW-RuPAC2021-TUPSB08
[n] Y. Sun et al., “The APS linac refurbishment program at Argonne”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM102, unpublished.
[n] Yu. Shvyd'ko et al., “Diamond Double-Crystal System for a Forward Bragg Diffraction X-Ray Monochromator of the Self-Seeded PAL XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 29-33. doi:10.18429/JACoW-FEL2017-MOP001
[n] C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
[n] G. Stinson et al., “COMPLETION OF THE ISAC-I ACCELERATOR FOR RADIOACTIVE IONS AND EXTENSION TO ISAC-II”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THAU03, pp. XX-XX.
[n] N. Tsoupas et al., “An Induction-Type Septum Magnet for the EIC Complex”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 603-606. doi:10.18429/JACoW-IPAC2022-MOPOTK060
[n] C. Feng et al., “Operation status of China Accelerator Facility for Superheavy Elements (CAFE2)”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper TUY02, unpublished.
[n] V. M. Kotov and R. A. Pose, “Control System for a Heavy-Ion Accelerator Complex K4 - K10”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 47-49. doi:10.18429/JACoW-ICALEPCS1991-S01SRA12
[n] O. Bajeat, C. Barue, M. Dubois, F. Lemagnen, and M. Michel, “A New Resistive High Temperature Oven for Metallic Beams Production”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper MOZZO05, unpublished.
[n] B. Stechauner, E. Fol, C. Rogers, J. Schieck, and D. Schulte, “Searching for the best initial beam parameters for efficient muon ionization cooling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2552-2555. doi:10.18429/JACoW-IPAC2024-WEPR30
[n] Z. Liang et al., “Superconducting β=0.40 half-wave cavity design for CiADS”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 434-437. doi:10.18429/JACoW-LINAC2024-TUPB054
[n] W. W. Destler, H. H. Fleischmann, P. G. O, M. Reiser, C. D. Striffler, and D. Welsh, “Studies of the Helix Controlled Beam Front Accelerator Concept”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3183-3186.
[n] S. A. Heifets, J. Seeman, and W. Stoeffl, “Pressure Stability under a Pump Failure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC02, pp. 2319-2320.
[n] S. Nagaitsev, A. Romanov, A. Shemyakin, A. Valishev, G. Stancari, and I. Lobach, “Two-photon undulator radiation”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA170, unpublished.
[n] J. M. Fisher, J. B. Gordon, L. J. Lagin, S. L. West, and J. C. Ho, “Java Tool Framework for Automation of Hardware Commissioning and Maintenance Procedures”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA14, pp. 547-549.
[n] M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 288-291. doi:10.18429/JACoW-IPAC2022-MOPOPT023
[n] E. Wang and J. Biswas, “Space Charge Effects on Spin Polarization in a High-Intensity Preinjector”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1353, unpublished.
[n] D. G. Crabb et al., “The Possibility of Acceleration of Polarized Protons in the Broookhaven AGS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3203-3206.
[n] F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4393-4395. doi:10.18429/JACoW-IPAC2023-THPA184
[n] B. Leissner et al., “Bunch Length Measurements using a Martin Puplett Interferometer at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA131, pp. 2172-2174.
[n] W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA130, unpublished.
[n] F. Lemagnen et al., “New Metallic Stable Ion Beams for GANIL”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 54-56. doi:10.18429/JACoW-ECRIS2020-MOZZO04
[n] H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
[n] J. Jarvis, A. Mondal, A. Romanov, J. Ruan, M. Wallbank, and V. Lebedev, “New advances in optical stochastic cooling”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOZD1, unpublished.
[n] R. J. Grieggs, A. Harvey, and D. J. Liska, “Radiation-Hardened Field Coils for FMIT Quadrupoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3617-3620.
[n] H. Wang et al., “Progress on magnetron R&Ds for industrial particle accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1498-1501. doi:10.18429/JACoW-IPAC2024-TUPR39
[n] A. Sandström et al., “Open source EtherCAT motion control, ECMC, at PSI”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 147-154. doi:10.18429/JACoW-ICALEPCS2025-MODG002
[n] F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
[n] C. Haddock et al., “SSC Dipole Quench Protection Heater Test Results”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2215-2218.
[n] C. Yang et al., “Distributed Self-Seeding Scheme for LCLS-II”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 68-71. doi:10.18429/JACoW-FEL2017-MOP018
[n] J. Ozelis et al., “Performance of PIP-II high-beta 650 cryomodule after transatlantic shipping”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 198-201. doi:10.18429/JACoW-LINAC2024-MOPB067
[n] J. L. Conradie et al., “New Developments and a Review of the Accelerator Facilities at iThemba LABS”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEXOR02, pp. 98-102.
[n] V. Lebedev et al., “NICA ion collider and its acceleration complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 634-637. doi:10.18429/JACoW-IPAC2023-MOPL043
[n] C.-Y. Tsai, J. Wu, C. Yang, M. Yoon, and G. Zhou, “Sideband Instability in a Tapered Free Electron Laser”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 76-79. doi:10.18429/JACoW-FEL2017-MOP020
[n] A. Anoshin et al., “A NEW INJECTION SYSTEM FOR KURCHATOV SOURCE OF SR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU01, pp. XX-XX.
[n] J. Wolfenden, C. Swain, C. Welsch, and T. Pacey, “Optical pepper-pots: developing single-shot emittance diagnostics”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3966-3969. doi:10.18429/JACoW-IPAC2023-THPA009
[n] B. Hendricks and R. H. Joshel, “Overview of the Next Generation of Fermilab Collider Software”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 243-245. doi:10.18429/JACoW-ICALEPCS1991-S06SA01
[n] C. Bontoiu et al., “TeV/m acceleration in laser-graphene interactions”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1454-1456. doi:10.18429/JACoW-IPAC2023-TUPA051
[n] L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1545-1548. doi:10.18429/JACoW-IPAC2023-TUPA097
[n] W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
[n] A. Maalberg et al., “First high-power RF tests of cavities for BESSY II with a new mTCA-based LLRF system”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM014, unpublished.
[n] D. Horan et al., “Solid state amplifier project at the Advanced Photon Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1470-1473. doi:10.18429/JACoW-IPAC2024-TUPR24
[n] A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 627-633. doi:10.18429/JACoW-SRF2023-WEIXA03
[n] I. Podadera et al., “DONES-ConP1 project: consolidating the start of the IFMIF-DONES construction phase”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1076-1079. doi:10.18429/JACoW-IPAC2024-TUPC35
[n] C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3233-3235. doi:10.18429/JACoW-IPAC2023-WEPL053
[n] A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
[n] K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n] Y. L. Chi et al., “The Development of the H- Ion Source Test Stand for CSNS”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP115, pp. 1007-1009.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Taylor, B. G. Chidley, and G. E. McMichael, “Design Recommendations for Low-Energy Components of ESNIT and OMEGA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-17, pp. 651-653.
- J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 411-414.
- S. V. Semenov, A. G. Kobets, S. A. Melnikov, I. N. Meshkov, and A. S. Sergeev, “Commissioning of Electron Cooling System of the NICA Booster Synchrotron”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB03, unpublished.
- K. Hatanaka et al., “Present Status of the RCNP Cyclotron Facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP016, pp. 78-80.
- A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A2, pp. 257-260.
- T. von Witzleben et al., “Beam dynamics for concurrent operation of the LHeC and the HL-LHC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA054, pp. 151-154.
- J. R. Calvey et al., “Advances in Understanding of Ion Effects in Electron Storage Rings”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1267-1272.
- K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA051, pp. 2774-2776.
- S. Lee et al., “The Beam Diagnostics System in the J-PARC LINAC”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP74, pp. 441-443.
- C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA099, pp. 2877-2880.
- M. Brendike et al., “ESRF-Double Crystal Monochromator Prototype - Control Concept”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 777.
- J. S. Yang, M.-H. Chun, Y. J. Han, S.-H. Nam, and I. H. Yu, “The Experiences of Operation and Performance about the 500 MHz CW Klystrons at the PLS Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF039, pp. 1051-1053.
- P.-W. Huang et al., “High brightness electron source development in Tsinghua university”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC78, unpublished.
- N. Gandolfo et al., “Fast Tuner Performance for a Double Spoke Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP077, pp. 1034-1036.
- S. D. Kolokolchikov, V. Senichev, and E. Syresin, “Magneto-Optical Structure of the NICA Collider With High Critical Energy”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 245-247.
- Y. Sun et al., “The APS linac refurbishment program at Argonne”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM102, unpublished.
- Yu. Shvyd'ko et al., “Diamond Double-Crystal System for a Forward Bragg Diffraction X-Ray Monochromator of the Self-Seeded PAL XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 29-33.
- C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
- G. Stinson et al., “COMPLETION OF THE ISAC-I ACCELERATOR FOR RADIOACTIVE IONS AND EXTENSION TO ISAC-II”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THAU03, pp. XX-XX.
- N. Tsoupas et al., “An Induction-Type Septum Magnet for the EIC Complex”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 603-606.
- C. Feng et al., “Operation status of China Accelerator Facility for Superheavy Elements (CAFE2)”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUY02, unpublished.
- V. M. Kotov and R. A. Pose, “Control System for a Heavy-Ion Accelerator Complex K4 - K10”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S01SRA12, pp. 47-49.
- O. Bajeat, C. Barue, M. Dubois, F. Lemagnen, and M. Michel, “A New Resistive High Temperature Oven for Metallic Beams Production”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO05, unpublished.
- B. Stechauner, E. Fol, C. Rogers, J. Schieck, and D. Schulte, “Searching for the best initial beam parameters for efficient muon ionization cooling”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR30, pp. 2552-2555.
- Z. Liang et al., “Superconducting β=0.40 half-wave cavity design for CiADS”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 434-437.
- W. W. Destler, H. H. Fleischmann, P. G. O, M. Reiser, C. D. Striffler, and D. Welsh, “Studies of the Helix Controlled Beam Front Accelerator Concept”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3183-3186.
- S. A. Heifets, J. Seeman, and W. Stoeffl, “Pressure Stability under a Pump Failure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC02, pp. 2319-2320.
- S. Nagaitsev, A. Romanov, A. Shemyakin, A. Valishev, G. Stancari, and I. Lobach, “Two-photon undulator radiation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA170, unpublished.
- J. M. Fisher, J. B. Gordon, L. J. Lagin, S. L. West, and J. C. Ho, “Java Tool Framework for Automation of Hardware Commissioning and Maintenance Procedures”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA14, pp. 547-549.
- M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 288-291.
- E. Wang and J. Biswas, “Space Charge Effects on Spin Polarization in a High-Intensity Preinjector”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1353, this conference.
- D. G. Crabb et al., “The Possibility of Acceleration of Polarized Protons in the Broookhaven AGS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3203-3206.
- F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA184, pp. 4393-4395.
- B. Leissner et al., “Bunch Length Measurements using a Martin Puplett Interferometer at the TESLA Test Facility Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA131, pp. 2172-2174.
- W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA130, unpublished.
- F. Lemagnen et al., “New Metallic Stable Ion Beams for GANIL”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO04, pp. 54-56.
- H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
- J. Jarvis, A. Mondal, A. Romanov, J. Ruan, M. Wallbank, and V. Lebedev, “New advances in optical stochastic cooling”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOZD1, unpublished.
- R. J. Grieggs, A. Harvey, and D. J. Liska, “Radiation-Hardened Field Coils for FMIT Quadrupoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3617-3620.
- H. Wang et al., “Progress on magnetron R&Ds for industrial particle accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR39, pp. 1498-1501.
- A. Sandström et al., “Open source EtherCAT motion control, ECMC, at PSI”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 147-154.
- F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
- C. Haddock et al., “SSC Dipole Quench Protection Heater Test Results”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2215-2218.
- C. Yang et al., “Distributed Self-Seeding Scheme for LCLS-II”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 68-71.
- J. Ozelis et al., “Performance of PIP-II high-beta 650 cryomodule after transatlantic shipping”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 198-201.
- J. L. Conradie et al., “New Developments and a Review of the Accelerator Facilities at iThemba LABS”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEXOR02, pp. 98-102.
- V. Lebedev et al., “NICA ion collider and its acceleration complex”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL043, pp. 634-637.
- C.-Y. Tsai, J. Wu, C. Yang, M. Yoon, and G. Zhou, “Sideband Instability in a Tapered Free Electron Laser”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 76-79.
- A. Anoshin et al., “A NEW INJECTION SYSTEM FOR KURCHATOV SOURCE OF SR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU01, pp. XX-XX.
- J. Wolfenden, C. Swain, C. Welsch, and T. Pacey, “Optical pepper-pots: developing single-shot emittance diagnostics”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA009, pp. 3966-3969.
- B. Hendricks and R. H. Joshel, “Overview of the Next Generation of Fermilab Collider Software”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S06SA01, pp. 243-245.
- C. Bontoiu et al., “TeV/m acceleration in laser-graphene interactions”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA051, pp. 1454-1456.
- L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA097, pp. 1545-1548.
- W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
- A. Maalberg et al., “First high-power RF tests of cavities for BESSY II with a new mTCA-based LLRF system”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM014, unpublished.
- D. Horan et al., “Solid state amplifier project at the Advanced Photon Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR24, pp. 1470-1473.
- A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEIXA03, pp. 627-633.
- I. Podadera et al., “DONES-ConP1 project: consolidating the start of the IFMIF-DONES construction phase”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC35, pp. 1076-1079.
- C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL053, pp. 3233-3235.
- A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
- K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC43, pp. 2060-2063.
- Y. L. Chi et al., “The Development of the H- Ion Source Test Stand for CSNS”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP115, pp. 1007-1009.
Back to search