Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Benvenuti, S. Calatroni, M. Hauer, M. Minestrini, G. Orlandi, and W. Weingarten, “(NbTi)N and NbTi Coatings for Superconducting Accelerating Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E15, pp. XX-XX.
[n] P. M. McIntyre, J. Breitschopf, D. C. V. Chavez, J. N. Kellams, and A. Sattarov, “LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 552-555. doi:10.18429/JACoW-IPAC2019-MOPMP048
[n] S. Jin et al., “Development of Frequency Measurement Setup for ADS 650MHz and 1.3GHz Superconducting RF Cavities at IHEP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO019, pp. 2358-2360.
[n] N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
[n] J. Plouin et al., “Main Choices and Preliminary Design for the IFMIF RF Couplers”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO033, pp. 634-637.
[n] A. Ropert and L. Farvacque, “Measurements of Tune Shifts with Amplitude at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE012, pp. 1284-1286.
[n] S. A. Veitzer, J. M. Byrd, K. G. Sonnad, and P. Stoltz, “Modeling Microwave Transmission in Electron Clouds”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP089, pp. 4512-4512.
[n] H. Wang et al., “RF Design Optimization for New Injector Cryounit at CEBAF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO073, pp. 2471-2473.
[n] S. F. Mikhailov, H. Hao, V. Popov, and Y. K. Wu, “Developing an Improved Pulsed Mode Operation for Duke Storage Ring Based FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1860-1862. doi:10.18429/JACoW-IPAC2015-TUPMA012
[n] A. Lasheen et al., “Investigations of losses on the CERN SPS flat bottom with HL-LHC type beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1652-1655. doi:10.18429/JACoW-IPAC2023-TUPA153
[n] C. Figley, “Electrical Performance of the Injection System Kickers at the Saskatchewan Accelerator Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 869-872.
[n] V. S. Lavrik, L. H. J. Bozyk, O. K. Kester, and A. Reiter, “Beam Loss Monitoring Study for SIS100@FAIR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC46, pp. 485-488.
[n] C. Wiesner, F. Carra, J. Kruse-Hansen, M. Masci, Y. Nie, and D. Wollmann, “Efficient Coupling of Hydrodynamic and Energy-Deposition Codes for Hydrodynamic-Tunnelling Studies on High-Energy Particle Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 119-122. doi:10.18429/JACoW-IPAC2021-MOPAB024
[n] M. Nomura et al., “Influence of Core Winding Tension and Ribbon Quality on the MA Core RF Characteristics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI021, pp. 2747-2749.
[n] M. P. Level, P. C. Marin, E. M. Sommer, B. Zotter, and H. Zyngier, “Transverse Mode-Coupling Experiment in DCI”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2215-2218.
[n] F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
[n] A. P. Shishlo, “SNS Linac Beam Dynamics: What We Understand, and What We Don’t”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 91-96. doi:10.18429/JACoW-HB2023-TUC2I2
[n] A. Salehilashkajani et al., “Non-Invasive Beam Profile Monitoring for the HL-LHC Hollow Electron Lens”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 884-887. doi:10.18429/JACoW-IPAC2021-MOPAB279
For LaTeX
Use Complete Form
For BibTeX
References
- C. Benvenuti, S. Calatroni, M. Hauer, M. Minestrini, G. Orlandi, and W. Weingarten, “(NbTi)N and NbTi Coatings for Superconducting Accelerating Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E15, pp. XX-XX.
- P. M. McIntyre, J. Breitschopf, D. C. V. Chavez, J. N. Kellams, and A. Sattarov, “LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 552-555.
- S. Jin et al., “Development of Frequency Measurement Setup for ADS 650MHz and 1.3GHz Superconducting RF Cavities at IHEP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO019, pp. 2358-2360.
- N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
- J. Plouin et al., “Main Choices and Preliminary Design for the IFMIF RF Couplers”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO033, pp. 634-637.
- A. Ropert and L. Farvacque, “Measurements of Tune Shifts with Amplitude at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE012, pp. 1284-1286.
- S. A. Veitzer, J. M. Byrd, K. G. Sonnad, and P. Stoltz, “Modeling Microwave Transmission in Electron Clouds”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP089, pp. 4512-4512.
- H. Wang et al., “RF Design Optimization for New Injector Cryounit at CEBAF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO073, pp. 2471-2473.
- S. F. Mikhailov, H. Hao, V. Popov, and Y. K. Wu, “Developing an Improved Pulsed Mode Operation for Duke Storage Ring Based FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1860-1862.
- A. Lasheen et al., “Investigations of losses on the CERN SPS flat bottom with HL-LHC type beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA153, pp. 1652-1655.
- C. Figley, “Electrical Performance of the Injection System Kickers at the Saskatchewan Accelerator Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 869-872.
- V. S. Lavrik, L. H. J. Bozyk, O. K. Kester, and A. Reiter, “Beam Loss Monitoring Study for SIS100@FAIR”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC46, pp. 485-488.
- C. Wiesner, F. Carra, J. Kruse-Hansen, M. Masci, Y. Nie, and D. Wollmann, “Efficient Coupling of Hydrodynamic and Energy-Deposition Codes for Hydrodynamic-Tunnelling Studies on High-Energy Particle Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 119-122.
- M. Nomura et al., “Influence of Core Winding Tension and Ribbon Quality on the MA Core RF Characteristics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI021, pp. 2747-2749.
- M. P. Level, P. C. Marin, E. M. Sommer, B. Zotter, and H. Zyngier, “Transverse Mode-Coupling Experiment in DCI”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2215-2218.
- F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
- A. P. Shishlo, “SNS Linac Beam Dynamics: What We Understand, and What We Don’t”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC2I2, pp. 91-96.
- A. Salehilashkajani et al., “Non-Invasive Beam Profile Monitoring for the HL-LHC Hollow Electron Lens”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 884-887.
Back to search