JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657. 
[n]	C. S. Chen, K. T. Chen, C. H. Kuo, and K. K. Lin, “Bunch-by-Bunch Intensity, Position Monitor for the Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP44C, pp. 1532-1534. 
[n]	E. Gjonaj, F. Quetscher, H. De Gersem, and Y.-C. Chae, “Impedance computation for large accelerator structures using a domain decomposition method”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3159-3162. doi:10.18429/JACoW-IPAC2024-THPC62
[n]	H.-S. Kang, J. Choi, K. M. Ha, E.-H. Lee, T.-Y. Lee, and W. W. Lee, “Test Result of Slow Global Orbit Feedback using MATLAB at PLS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT084, pp. 2694-2696. 
[n]	K. Ohmi et al., “Electron Cloud Instability in SuperKEKB Phase I Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3104-3106. doi:10.18429/JACoW-IPAC2017-WEPIK075
[n]	A. Walker and W. J. Gallagher, “Mechanical Limitations in High Average Power Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3125-3128. 
[n]	A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403. 
[n]	L. Hermansson and Y.-N. Rao, “Intra-Beam Scattering at CELSIUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B10, pp. 1549-1551. 
[n]	B. Lorentz et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT043, pp. 1246-1248. 
[n]	Ch. Schmidt, M. K. Bock, W. Koprek, S. Pfeiffer, H. Schlarb, and W. Jalmuzna, “Feedback Strategies for Bunch Arrival Time Stabilization at FLASH Towards 10 fs”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA26, pp. 531-534. 
[n]	J. Wang, M. Li, H. B. Wang, and D. Wu, “Bunch Length Measurement Based on the Beam Position Monitor”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA33, pp. 555-556. 
[n]	W. J. Gallagher, “Properties of Disc-Loaded Lines”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 952-957. 
[n]	B. Lorbeer, H. T. Duhme, I. Krouptchenkov, T. Lensch, D. Lipka, and M. Werner, “First Test with MicroTCA Based Cavity BPM Electronics for the European XFEL and FLASH”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 70-73. doi:10.18429/JACoW-IBIC2023-MOP019
[n]	N. Kishida, T. Inamura, H. Saito, T. Wada, and Y. Yano, “Beam Transport System for the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-37, pp. 517-519. 
[n]	D. Gassner and R. L. Witkover, “Design and Testing of the New Ion Chamber Loss Monitor for SNS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB019, pp. 2450-2452. 
[n]	T. Shibata, K. Fan, K. Hamano, K. Ishii, H. Matsumoto, and T. Sugimoto, “The New Eddy Current type Septum Magnets for Upgrading of Fast Extraction in Main Ring of J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1997-2000. doi:10.18429/JACoW-IPAC2019-TUPTS029
[n]	A. Abramov, G. Broggi, K. André, M. Hofer, R. Bruce, and S. Redaelli, “Studies of layout and cleaning performance for the FCC-ee collimation system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 356-359. doi:10.18429/JACoW-IPAC2023-MOPA128
[n]	J. Welch, L. Rubin, and B. Temnykh, “The Superconducting Interaction Region Magnet Positioning System for the CESR Phase III Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P066, pp. 3654-3656. 
[n]	P. J. Chou and A. W. Chao, “Collective Beam Instabilities in the Taiwan Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH133, pp. 1978-1980. 
[n]	A. Novokhatski et al., “The design and electromagnetic analyses of the new elements in the FCC-ee IR vacuum chamber”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2508-2511. doi:10.18429/JACoW-IPAC2024-WEPR18
[n]	Y. W. Parc, M. S. Chae, J. H. Hong, and I. S. Ko, “Simulation Study on Emittance Increase due to RF Asymmetry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE038, pp. 2224-2226. 
[n]	G. Kube and M. Werner, “Signal Level Calculation for the PETRA-III Beam Position Monitor System”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB19, pp. 105-107. 
[n]	P. S. Kallakuri, A. R. Brill, J. Carwardine, and N. Sereno, “Closed Loop Modeling of the APS-U Orbit Feedback System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 683-686. doi:10.18429/JACoW-NAPAC2019-WEPLM11
[n]	A. M. Porcellato et al., “On Line Performance and Upgrading of ALPI Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP010, pp. 174-178. 
[n]	C. Chen and J. Z. Zhou, “Equilibrium Theory of an Intense Elliptic Beam for High-Power Ribbon-Beam Klystron Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN119, pp. 2316-2318. 
[n]	P. Muggli et al., “Electron Bunch Self-modulation in Long Plasmas at SLAC FACET”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1476-1478. doi:10.18429/JACoW-IPAC2014-TUPME050
[n]	A. Mapar, F. Pourboghrat, T. R. Bieler, C. Compton, and J. E. Murphy, “Hydroforming of Large Grain Niobium Tube”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB040, pp. 1171-1175. 
[n]	D. M. Harryman et al., “Beam Loss Monitoring in the ISIS Synchrotron Main Dipole Magnets”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 236-239. doi:10.18429/JACoW-IBIC2018-TUPA14
[n]	J. Lee et al., “Bunch by Bunch Position Measurement and Analysis at PLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 232-234. doi:10.18429/JACoW-IPAC2016-MOPMR002
[n]	Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX. 
[n]	J. Starker and M. Engström, “Status of the Control and Beam Diagnostic Systems of the CRYRING Project”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 167-170. doi:10.18429/JACoW-ICALEPCS1991-S04SRS03
[n]	S. P. Virostek, M. D. Hoff, D. Li, J. W. Staples, and R. P. Wells, “Mechanical Design and Analysis of a 200 MHz, Bolt-together RFQ for the Accelerator Driven Neutron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN118, pp. 2313-2315. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search