Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1100-1103. doi:10.18429/JACoW-IPAC2024-TUPC41
[n] Y. Liu, J. Tong, and Q. Yuan, “EMI measurement for SXFEL klystron-modulator system”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS34, unpublished.
[n] M. Trovo et al., “Recent results of the high gradient S-band accelerating module for FERMI energy upgrade”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 109-111. doi:10.18429/JACoW-LINAC2024-MOPB032
[n] P. Betinelli-Deck et al., “Status of the SOLEIL Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O4_015.
[n] N. Vitoratou, P. Karataev, and G. Rehm, “Beam Loss Monitors for Energy Measurements in Diamond Light Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 482-486. doi:10.18429/JACoW-IBIC2017-TH1AB3
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] A. Coniglio, C. R. Frascati, M. D, M. P. Pillon, and S. Sandri, “Neutron Flux and Activation Calculations for a High Current Deuteron Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE010, pp. 1192-1194.
[n] R. J. Michnoff et al., “The Brookhaven Linac Isotope Production (BLIP) Facility Raster Scanning System First Year Operation with Beam”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-IBIC2016-MOPG28
[n] P. D. Hermes, K. A. Dewhurst, A. S. Fomin, D. Mirarchi, and S. Redaelli, “Layouts for Feasibility Studies of Fixed-Target Experiments at the LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2134-2137. doi:10.18429/JACoW-IPAC2022-WEPOTK033
[n] L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3912-3914. doi:10.18429/JACoW-IPAC2019-THPRB044
[n] C. Z. Antoine et al., “Magnetic Screening of NbN Multilayers Samples”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUIOA03, pp. 281-286.
[n] T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1884-1887.
[n] N. Delerue et al., “Prospects of Additive Manufacturing for Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4118-4120. doi:10.18429/JACoW-IPAC2019-THPTS008
[n] A. Cianchi et al., “Superconducting Niobium Film for RF Applications”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF025, pp. 1021-1023.
[n] N. Fuster-Martinez et al., “Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 139-142. doi:10.18429/JACoW-IBIC2016-MOPG40
[n] J. Shi and G. Hoffstaetter, “Method of Perturbative-PIC Simulation for Interactions between a Bunch and Its Synchrotron Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS045, pp. 3594-3596.
[n] R. A. Legg, W. Graves, T. L. Grimm, and P. Piot, “Half Wave Injector Design for WiFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD012, pp. 469-471.
[n] B. V. Golovenskiy et al., “He⁺ Ion Source for the NICA Injection Complex”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 316-318. doi:10.18429/JACoW-RuPAC2021-TUPSB40
[n] B. Mustapha, M. Alcorta, B. Back, and P. N. Ostroumov, “Design and Simulation of the Argonne Inflight Radiactive Ion Separator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPSM02, pp. 351-353.
[n] Y. Li, S. Y. Chen, C. Han, and P. Liu, “Research on Module Design and Network Management of Accelerator Power Supply System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1291-1293. doi:10.18429/JACoW-IPAC2019-TUPMP024
[n] R. Cimino et al., “A Retarding Field Detector to Measure the Actual Energy of Electrons Participating in E-cloud Formation in Accelerators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC019, pp. 1086-1088.
[n] B. Farnham et al., “A Movement Control System for Roman Pots at the LHC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC025, pp. 115-118.
[n] Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 587-590. doi:10.18429/JACoW-NAPAC2019-TUPLE13
[n] S. Tazzari, “The ARES Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 317-320.
[n] A. Brinkmann, M. Lengkeit, and J. A. Lorkiewicz, “TiN Coating of RF Power Components for the European XFEL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO037, pp. 652-655.
[n] E. Benedetto, M. Cieslak-Kowalska, and P. Zisopoulos, “Tail Repopulation Measurements in the PSB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3343-3346. doi:10.18429/JACoW-IPAC2017-WEPVA038
[n] F. Zimmermann, R. W. Assmann, and A. P. Blondel, “Summary of Design Concepts”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 195-198. doi:10.18429/JACoW-eeFACT2016-THS1H1
[n] W. W. Gao, W. Li, and L. Wang, “Low Emittance Lattice Optimization Using Multiobjective Genetic Algorithm”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE001, pp. 4515-4517.
[n] R. Pan, T. Lefevre, W. A. Gillespie, and S. P. Jamison, “Synchronization Scheme a Bunch Profile Monitor Based on Electro-Optic Spectral Decoding”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG034, pp. 104-106.
[n] G. Abeillé et al., “Rolling Out a New Platform for Information System Architecture at SOLEIL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1301-1305. doi:10.18429/JACoW-ICALEPCS2023-THPDP007
[n] N. Steinhau-Kuehl, T. Eidtner, C. Hartmann, B. Henkel, and A. Matheisen, “Update on Quality Control of the Electro-Polishing Acid”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO081, pp. 811-813.
[n] Q. Qin et al., “Beam Dynamic Issues in the BEPCII Luminosity Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB020, pp. 1560-1562.
[n] H. Junkes et al., “Integrating the FHI-FEL Into the FHI Research Environment - Design and Implementation Aspects”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO30, pp. 562-565.
[n] P. Kneisel, A. Brinkmann, G. Ciovati, D. Reschke, W. Singer, and X. Singer, “Performance of Single Crystal Niobium Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP136, pp. 877-879.
[n] D. Einfeld, “Performance and Perspective of Modern Synchrotron Light Sources”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 17-24. doi:10.18429/JACoW-eeFACT2016-MOOTH4
[n] Zh. C. Liu and J. Qiang, “Performance Optimization of a Beam Dynamics PIC Code On Hybrid Computer Architectures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3309-3312. doi:10.18429/JACoW-IPAC2018-THPAK043
[n] Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC41, pp. 1100-1103.
- Y. Liu, J. Tong, and Q. Yuan, “EMI measurement for SXFEL klystron-modulator system”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS34, unpublished.
- M. Trovo et al., “Recent results of the high gradient S-band accelerating module for FERMI energy upgrade”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 109-111.
- P. Betinelli-Deck et al., “Status of the SOLEIL Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O4_015.
- N. Vitoratou, P. Karataev, and G. Rehm, “Beam Loss Monitors for Energy Measurements in Diamond Light Source”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 482-486.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- A. Coniglio, C. R. Frascati, M. D, M. P. Pillon, and S. Sandri, “Neutron Flux and Activation Calculations for a High Current Deuteron Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE010, pp. 1192-1194.
- R. J. Michnoff et al., “The Brookhaven Linac Isotope Production (BLIP) Facility Raster Scanning System First Year Operation with Beam”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- P. D. Hermes, K. A. Dewhurst, A. S. Fomin, D. Mirarchi, and S. Redaelli, “Layouts for Feasibility Studies of Fixed-Target Experiments at the LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2134-2137.
- L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3912-3914.
- C. Z. Antoine et al., “Magnetic Screening of NbN Multilayers Samples”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUIOA03, pp. 281-286.
- T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1884-1887.
- N. Delerue et al., “Prospects of Additive Manufacturing for Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4118-4120.
- A. Cianchi et al., “Superconducting Niobium Film for RF Applications”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF025, pp. 1021-1023.
- N. Fuster-Martinez et al., “Performance Studies of a Single Vertical Beam Halo Collimation System at ATF2”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 139-142.
- J. Shi and G. Hoffstaetter, “Method of Perturbative-PIC Simulation for Interactions between a Bunch and Its Synchrotron Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS045, pp. 3594-3596.
- R. A. Legg, W. Graves, T. L. Grimm, and P. Piot, “Half Wave Injector Design for WiFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD012, pp. 469-471.
- B. V. Golovenskiy et al., “He⁺ Ion Source for the NICA Injection Complex”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 316-318.
- B. Mustapha, M. Alcorta, B. Back, and P. N. Ostroumov, “Design and Simulation of the Argonne Inflight Radiactive Ion Separator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPSM02, pp. 351-353.
- Y. Li, S. Y. Chen, C. Han, and P. Liu, “Research on Module Design and Network Management of Accelerator Power Supply System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1291-1293.
- R. Cimino et al., “A Retarding Field Detector to Measure the Actual Energy of Electrons Participating in E-cloud Formation in Accelerators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC019, pp. 1086-1088.
- B. Farnham et al., “A Movement Control System for Roman Pots at the LHC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC025, pp. 115-118.
- Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 587-590.
- S. Tazzari, “The ARES Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 317-320.
- A. Brinkmann, M. Lengkeit, and J. A. Lorkiewicz, “TiN Coating of RF Power Components for the European XFEL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO037, pp. 652-655.
- E. Benedetto, M. Cieslak-Kowalska, and P. Zisopoulos, “Tail Repopulation Measurements in the PSB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3343-3346.
- F. Zimmermann, R. W. Assmann, and A. P. Blondel, “Summary of Design Concepts”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 195-198.
- W. W. Gao, W. Li, and L. Wang, “Low Emittance Lattice Optimization Using Multiobjective Genetic Algorithm”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE001, pp. 4515-4517.
- R. Pan, T. Lefevre, W. A. Gillespie, and S. P. Jamison, “Synchronization Scheme a Bunch Profile Monitor Based on Electro-Optic Spectral Decoding”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG034, pp. 104-106.
- G. Abeillé et al., “Rolling Out a New Platform for Information System Architecture at SOLEIL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP007, pp. 1301-1305.
- N. Steinhau-Kuehl, T. Eidtner, C. Hartmann, B. Henkel, and A. Matheisen, “Update on Quality Control of the Electro-Polishing Acid”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO081, pp. 811-813.
- Q. Qin et al., “Beam Dynamic Issues in the BEPCII Luminosity Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB020, pp. 1560-1562.
- H. Junkes et al., “Integrating the FHI-FEL Into the FHI Research Environment - Design and Implementation Aspects”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO30, pp. 562-565.
- P. Kneisel, A. Brinkmann, G. Ciovati, D. Reschke, W. Singer, and X. Singer, “Performance of Single Crystal Niobium Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP136, pp. 877-879.
- D. Einfeld, “Performance and Perspective of Modern Synchrotron Light Sources”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 17-24.
- Zh. C. Liu and J. Qiang, “Performance Optimization of a Beam Dynamics PIC Code On Hybrid Computer Architectures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3309-3312.
- Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
Back to search