Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 749-752. doi:10.18429/JACoW-FEL2019-THP084
[n] E. Huenges, H. Morinaga, and H. Muthig, “Performance of the Munich Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-04, pp. 111-112.
[n] N. R. Kurita, R. M. Boyce, E. F. Daly, B. D. Scott, and T. A. Trautwein, “Overview of the SPEAR3 Vacuum System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA123, pp. 1363-1365.
[n] M. Jenkins et al., “A Prototype 1 Mev X-Band Linac for Aviation Cargo Inspection”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP012, pp. 853-855.
[n] A. Moretti, R. J. Lari, R. L. Martin, R. L. Stockley, and J. M. Watson, “Low Frequency RFQ Linacs for Heavy Ion Fusion”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E16, pp. 197-199.
[n] K. Ohmi and Y. Alexahin, “Effect of Beam-beam Interactions on Stability of Coherent Oscillations in a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR004, pp. 2940-2942.
[n] A. T. Visser and R. F. Nissen, “Pulsed Septum Magnet and Power Supply for the 8 GeV Beam Transfer Line at the National Accelerator Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 991-994.
[n] V. Kumar and K.-J. Kim, “Effect of Energy Spread on Start Current of Smith-Purcell BWO”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH004, pp. 13-16.
[n] W. P. Lysenko, E. A. Wadlinger, B. Rusnak, F. Krawczyk, K. Saadatmand, and Z. Wan, “Designing Double-Gap Linear Accelerators for a Wide Mass Range”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4038, pp. 854-856.
[n] H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707.
[n] A. Cianchi et al., “Superconducting Niobium Film for RF Applications”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF025, pp. 1021-1023.
[n] B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2477-2480.
[n] M. G. Tiefenback and D. Keefe, “Measurements of Stability Limits for a Space-Charge-Dominated Ion Beam in a Long A.G. Transport Channel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2483-2486.
[n] A. Facco et al., “Superconducting RF Activities at LNL”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL014, pp. XX-XX.
[n] M. Cargnelutti et al., “S-Band Cavity BPM Readout Electronics for the ELI-NP Gamma Beam Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 243-246. doi:10.18429/JACoW-IBIC2017-TUPCF15
[n] S. Doering and U. Berges, “EPICS at the Synchrotron Radiation Source DELTA”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB32, pp. 232-234.
[n] P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1226-1229. doi:10.18429/JACoW-IPAC2022-TUPOTK014
[n] P. Brittner et al., “The Stochastic Cooling System of COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 842-845.
[n] D. E. Young et al., “Initial Performance of the NAL 200-MeV Linear Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 517-522.
[n] M. Mishima et al., “Numerical Study on Electron Beam Properties in Triode Type Thermionic RF Gun”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO50, pp. 344-347.
[n] J. D. Ivers, J. A. Nation, and I. Roth, “Proton Acceleration in an Induction Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3380-3383.
[n] S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1934-1936. doi:10.18429/JACoW-IPAC2024-WECD1
[n] M. Jenkins, J. Ollier, J. Burke, and M. Procter, “The X-ray imaging laboratory: a radiation test facility for validating industrial linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3684-3686. doi:10.18429/JACoW-IPAC2024-THPR72
[n] I. Haber, “Computer Simulation of Multiple-Beam Final Focusing Systems for Heavy Ion Fusion”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2616-2618.
[n] D. C. Carey, R. J. Stefanski, and L. C. Teng, “Wide Band Neutrino Beams with Quadrupole Focusing”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 755-759.
[n] Th. Sluyters and V. Kovarik, “Properties of H- and D- Beams from Magnetron and Penning Sources”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-4, pp. 428-431.
[n] A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 89-91. doi:10.18429/JACoW-HIAT2018-TUOXA01
[n] A. Nordt et al., “Development, Characterisation and Performance of the LHC Beam Loss Monitoring System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD63, pp. 240-244.
[n] H. Vennekate et al., “On the Way to a 10 MeV, Conduction-Cooled, Compact SRF Accelerator”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 471-476. doi:10.18429/JACoW-SRF2023-TUPTB033
[n] M. A. Balcewicz, M. Blaskiewicz, and Y. Hao, “Method for a Multiple Square Well Model to Study Transverse Mode Coupling Instability”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 395-398. doi:10.18429/JACoW-NAPAC2019-TUPLM12
[n] J. King, “Studies for Muon Collider Parameters at Center-of-Mass Energies of 10 TeV and 100 TeV”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP37, pp. 3038-3040.
[n] D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134.
[n] S. Seddon-Stettler et al., “Thin gold layers on niobium for SRF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 10-12. doi:10.18429/JACoW-LINAC2024-MOAA001
[n] C. L. Li et al., “Photoinjector Drive Laser Temporal Shaping for Shanghai Soft X-Ray Free Electron Laser”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1674-1677. doi:10.18429/JACoW-IPAC2021-TUPAB121
[n] M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3465-3468. doi:10.18429/JACoW-IPAC2024-THPG84
[n] R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731.
[n] R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
[n] R. Paparella et al., “INFN-LASA for the Fermilab PIP-II”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1249-1251. doi:10.18429/JACoW-IPAC2022-TUPOTK022
[n] R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
[n] M. Borland and J. W. Lewellen, “Initial Characterization of Coherent Synchrotron Radiation Effects in the APS Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH001, pp. 2839-2841.
[n] S. D. Holmes, J. D. McCarthy, S. A. Sommers, R. C. Webber, and J. R. Zagel, “The TeV I Beam Position Monitor System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1927-1930.
[n] E. Regenstreif, “Phase Space Acceptance of a General Triplet”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper H-10, pp. 899-904.
[n] M. Vossberg et al., “Adaption of the HSI -RFQ Rf-Properties to an Improved Beam Dynamics Layout”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 938-940. doi:10.18429/JACoW-IPAC2018-TUPAF086
[n] P. A. Gurd, W. H. Strong, and J. Creel, “Programming PLCs under EPICS at the SNS Project : Further Experiences in Collaboration”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH514, pp. XX-XX.
[n] D. C. Larbalestier and P. J. Lee, “Prospects for the Use of High Temperature Superconductors in High Field Accelerator Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBR4, pp. 177-181.
[n] Y. Jiang et al., “Electron cyclotron resonance accelerator for industrial radiation processing”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1567-1569. doi:10.18429/JACoW-IPAC2025-TUPS060
[n] R. A. Bosch, “Initial and Subsequent Growth of the Fast Ion ("Ion Hose") Instability”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH136, pp. 1987-1989.
[n] A. Picksley et al., “High-intensity pulse propagation in multi-GeV laser plasma accelerator stages”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR51, unpublished.
[n] J. P. Blewett et al., “Injection into the ISA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 816-819.
[n] B. Singh, A. I. Baldwin, R. Bartolini, and I. P. S. Martin, “Effect of Insertion Devices on Beam Dynamics of the Diamond Storage Ring Using Kick Maps”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH075, pp. 2092-2094.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 749-752.
- E. Huenges, H. Morinaga, and H. Muthig, “Performance of the Munich Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-04, pp. 111-112.
- N. R. Kurita, R. M. Boyce, E. F. Daly, B. D. Scott, and T. A. Trautwein, “Overview of the SPEAR3 Vacuum System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA123, pp. 1363-1365.
- M. Jenkins et al., “A Prototype 1 Mev X-Band Linac for Aviation Cargo Inspection”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP012, pp. 853-855.
- A. Moretti, R. J. Lari, R. L. Martin, R. L. Stockley, and J. M. Watson, “Low Frequency RFQ Linacs for Heavy Ion Fusion”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E16, pp. 197-199.
- K. Ohmi and Y. Alexahin, “Effect of Beam-beam Interactions on Stability of Coherent Oscillations in a Muon Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR004, pp. 2940-2942.
- A. T. Visser and R. F. Nissen, “Pulsed Septum Magnet and Power Supply for the 8 GeV Beam Transfer Line at the National Accelerator Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 991-994.
- V. Kumar and K.-J. Kim, “Effect of Energy Spread on Start Current of Smith-Purcell BWO”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH004, pp. 13-16.
- W. P. Lysenko, E. A. Wadlinger, B. Rusnak, F. Krawczyk, K. Saadatmand, and Z. Wan, “Designing Double-Gap Linear Accelerators for a Wide Mass Range”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4038, pp. 854-856.
- H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707.
- A. Cianchi et al., “Superconducting Niobium Film for RF Applications”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF025, pp. 1021-1023.
- B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2477-2480.
- M. G. Tiefenback and D. Keefe, “Measurements of Stability Limits for a Space-Charge-Dominated Ion Beam in a Long A.G. Transport Channel”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2483-2486.
- A. Facco et al., “Superconducting RF Activities at LNL”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL014, pp. XX-XX.
- M. Cargnelutti et al., “S-Band Cavity BPM Readout Electronics for the ELI-NP Gamma Beam Source”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 243-246.
- S. Doering and U. Berges, “EPICS at the Synchrotron Radiation Source DELTA”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB32, pp. 232-234.
- P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1226-1229.
- P. Brittner et al., “The Stochastic Cooling System of COSY”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 842-845.
- D. E. Young et al., “Initial Performance of the NAL 200-MeV Linear Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 517-522.
- M. Mishima et al., “Numerical Study on Electron Beam Properties in Triode Type Thermionic RF Gun”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO50, pp. 344-347.
- J. D. Ivers, J. A. Nation, and I. Roth, “Proton Acceleration in an Induction Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3380-3383.
- S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECD1, pp. 1934-1936.
- M. Jenkins, J. Ollier, J. Burke, and M. Procter, “The X-ray imaging laboratory: a radiation test facility for validating industrial linacs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR72, pp. 3684-3686.
- I. Haber, “Computer Simulation of Multiple-Beam Final Focusing Systems for Heavy Ion Fusion”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2616-2618.
- D. C. Carey, R. J. Stefanski, and L. C. Teng, “Wide Band Neutrino Beams with Quadrupole Focusing”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 755-759.
- Th. Sluyters and V. Kovarik, “Properties of H- and D- Beams from Magnetron and Penning Sources”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-4, pp. 428-431.
- A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 89-91.
- A. Nordt et al., “Development, Characterisation and Performance of the LHC Beam Loss Monitoring System”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD63, pp. 240-244.
- H. Vennekate et al., “On the Way to a 10 MeV, Conduction-Cooled, Compact SRF Accelerator”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB033, pp. 471-476.
- M. A. Balcewicz, M. Blaskiewicz, and Y. Hao, “Method for a Multiple Square Well Model to Study Transverse Mode Coupling Instability”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 395-398.
- J. King, “Studies for Muon Collider Parameters at Center-of-Mass Energies of 10 TeV and 100 TeV”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP37, pp. 3038-3040.
- D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134.
- S. Seddon-Stettler et al., “Thin gold layers on niobium for SRF cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 10-12.
- C. L. Li et al., “Photoinjector Drive Laser Temporal Shaping for Shanghai Soft X-Ray Free Electron Laser”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1674-1677.
- M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG84, pp. 3465-3468.
- R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731.
- R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
- R. Paparella et al., “INFN-LASA for the Fermilab PIP-II”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1249-1251.
- R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
- M. Borland and J. W. Lewellen, “Initial Characterization of Coherent Synchrotron Radiation Effects in the APS Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH001, pp. 2839-2841.
- S. D. Holmes, J. D. McCarthy, S. A. Sommers, R. C. Webber, and J. R. Zagel, “The TeV I Beam Position Monitor System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1927-1930.
- E. Regenstreif, “Phase Space Acceptance of a General Triplet”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper H-10, pp. 899-904.
- M. Vossberg et al., “Adaption of the HSI -RFQ Rf-Properties to an Improved Beam Dynamics Layout”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 938-940.
- P. A. Gurd, W. H. Strong, and J. Creel, “Programming PLCs under EPICS at the SNS Project : Further Experiences in Collaboration”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH514, pp. XX-XX.
- D. C. Larbalestier and P. J. Lee, “Prospects for the Use of High Temperature Superconductors in High Field Accelerator Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBR4, pp. 177-181.
- Y. Jiang et al., “Electron cyclotron resonance accelerator for industrial radiation processing”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS060, pp. 1567-1569.
- R. A. Bosch, “Initial and Subsequent Growth of the Fast Ion ("Ion Hose") Instability”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH136, pp. 1987-1989.
- A. Picksley et al., “High-intensity pulse propagation in multi-GeV laser plasma accelerator stages”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR51, unpublished.
- J. P. Blewett et al., “Injection into the ISA”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 816-819.
- B. Singh, A. I. Baldwin, R. Bartolini, and I. P. S. Martin, “Effect of Insertion Devices on Beam Dynamics of the Diamond Storage Ring Using Kick Maps”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH075, pp. 2092-2094.
Back to search