Favourites
For Word
[n] H. Hahn and S. Tepikian, “On the Longitudinal Coupling Impedance of a Toroidal Beam Tube”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1043-1046.
[n] M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115.
[n] C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442.
[n] M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1951-1953. doi:10.18429/JACoW-IPAC2019-TUPTS009
[n] O. Kumar, N. Falls, and S. Philip, “Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM091, unpublished.
[n] C. Antoine, J. Gaiffier, H. Chalaye, and J. F. Roche, “Hydroforming at C. E.A. Saclay: First Results”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C20, pp. 598-605.
[n] B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
[n] K. Nii et al., “Impact of Vertical Electropolishing with Flipping System on Removal Uniformity and Surface State: Study with 9-Cell Niobium Coupon Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 783. doi:10.18429/JACoW-SRF2021-THPCAV003
[n] P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
[n] C. Maglioni, M. Delonca, M. Gil Costa, and A. Vacca, “Use of Silicon Carbide as Beam Intercepting Device Material: Tests, Issues and Numerical Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3998-4000. doi:10.18429/JACoW-IPAC2014-THPRI096
[n] K. Nohara et al., “Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2869-2872. doi:10.18429/JACoW-IPAC2015-WEPMA046
[n] ?à. Andersson, M. Eriksson, M. Georgsson, G. LeBlanc, L.-J. Lindgren, and S. Werin, “MAX-III, a 700 MeV Storage Ring for Synchrotron Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A19, pp. 643-644.
[n] H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46.
[n] M. A. Mamun et al., “Production of Magnetized Electron Beam from a DC High Voltage Photogun”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4567-4570. doi:10.18429/JACoW-IPAC2018-THPMK108
[n] D. A. Herrup, D. Finley, and G. Jackson, “Luminosity Lifetime in the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1824-1827.
[n] K. N. Nii et al., “Vertical Electropolishing of Niobium Nine-Cell Cavity with a Cavity Flipping System for Uniform Removal”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 467-469. doi:10.18429/JACoW-SRF2019-TUP027
[n] V. Vuppala et al., “Distributed Information Services for Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA02, pp. 1000-1003.
[n] H. Maesaka et al., “Beam Diagnostic System of XFEL/SPring-8”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOA03, pp. 11-13.
[n] V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
[n] T. Konomi, F. Furuta, K. Saito, and F. Yasuda, “Development of the Demountable Damped Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO038, pp. 172-176.
[n] D. Dohan, “The IRMIS Universal Component-Type Model”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA03, pp. 82-83.
[n] M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
[n] Y. Yuri et al., “Beam Uniformization System Using Multipole Magnets at the JAEA AVF Cyclotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC045, pp. 3077-3079.
[n] X. Y. Xu, J. W. Xia, and P. Yuan, “A Program on Magnet Optimization Design”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-21, pp. 526-527.
[n] L. Wang, H. Fukuma, S. Kurokawa, K. Ohmi, and K. Oide, “Photoelectron Trapping in Electric and Magetic Field”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO007, pp. 1586-1588.
[n] E. Ferrari et al., “Dispersion-Free Steering Beam Based Alignment at SwissFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1163-1166. doi:10.18429/JACoW-IPAC2022-TUPOPT065
[n] X. Zhao et al., “Surface Characterization of Niobium Samples Electropolished Together with Real Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO086, pp. 441-445.
[n] J. W. Xia, B. W. Wei, and W. L. Zhan, “Cooler Storage Ring at China Institute of Modern Physics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPD003, pp. 271-275.
[n] A. Akiyama et al., “Control System of the KEKB Accelerator Complex”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPB04, pp. 268-270.
[n] M. Signorelli, Y. Cai, and G. Hoffstaetter, “BAGELS: A general method for minimizing the rate of radiative depolarization in electron storage rings”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 262-265. doi:10.18429/JACoW-IPAC2024-MOPC81
[n] M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 261-264. doi:10.18429/JACoW-IBIC2018-TUPB03
[n] F. Simoens and A. France, “Tuning Procedure of The 5 MeV IPHI RFQ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH486, pp. 794-796.
[n] S. Y. Lee and S. Tepikian, “The Chaotic Dynamical Aperture”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2225-2228.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn and S. Tepikian, “On the Longitudinal Coupling Impedance of a Toroidal Beam Tube”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1043-1046.
- M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115.
- C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442.
- M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1951-1953.
- O. Kumar, N. Falls, and S. Philip, “Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM091, unpublished.
- C. Antoine, J. Gaiffier, H. Chalaye, and J. F. Roche, “Hydroforming at C. E.A. Saclay: First Results”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C20, pp. 598-605.
- B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
- K. Nii et al., “Impact of Vertical Electropolishing with Flipping System on Removal Uniformity and Surface State: Study with 9-Cell Niobium Coupon Cavity”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 783.
- P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
- C. Maglioni, M. Delonca, M. Gil Costa, and A. Vacca, “Use of Silicon Carbide as Beam Intercepting Device Material: Tests, Issues and Numerical Simulations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3998-4000.
- K. Nohara et al., “Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2869-2872.
- ?à. Andersson, M. Eriksson, M. Georgsson, G. LeBlanc, L.-J. Lindgren, and S. Werin, “MAX-III, a 700 MeV Storage Ring for Synchrotron Radiation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A19, pp. 643-644.
- H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46.
- M. A. Mamun et al., “Production of Magnetized Electron Beam from a DC High Voltage Photogun”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4567-4570.
- D. A. Herrup, D. Finley, and G. Jackson, “Luminosity Lifetime in the Tevatron Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1824-1827.
- K. N. Nii et al., “Vertical Electropolishing of Niobium Nine-Cell Cavity with a Cavity Flipping System for Uniform Removal”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 467-469.
- V. Vuppala et al., “Distributed Information Services for Control Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOBA02, pp. 1000-1003.
- H. Maesaka et al., “Beam Diagnostic System of XFEL/SPring-8”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOOA03, pp. 11-13.
- V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
- T. Konomi, F. Furuta, K. Saito, and F. Yasuda, “Development of the Demountable Damped Cavity”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO038, pp. 172-176.
- D. Dohan, “The IRMIS Universal Component-Type Model”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA03, pp. 82-83.
- M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
- Y. Yuri et al., “Beam Uniformization System Using Multipole Magnets at the JAEA AVF Cyclotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC045, pp. 3077-3079.
- X. Y. Xu, J. W. Xia, and P. Yuan, “A Program on Magnet Optimization Design”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-21, pp. 526-527.
- L. Wang, H. Fukuma, S. Kurokawa, K. Ohmi, and K. Oide, “Photoelectron Trapping in Electric and Magetic Field”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO007, pp. 1586-1588.
- E. Ferrari et al., “Dispersion-Free Steering Beam Based Alignment at SwissFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1163-1166.
- X. Zhao et al., “Surface Characterization of Niobium Samples Electropolished Together with Real Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO086, pp. 441-445.
- J. W. Xia, B. W. Wei, and W. L. Zhan, “Cooler Storage Ring at China Institute of Modern Physics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPD003, pp. 271-275.
- A. Akiyama et al., “Control System of the KEKB Accelerator Complex”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPB04, pp. 268-270.
- M. Signorelli, Y. Cai, and G. Hoffstaetter, “BAGELS: A general method for minimizing the rate of radiative depolarization in electron storage rings”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC81, pp. 262-265.
- M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 261-264.
- F. Simoens and A. France, “Tuning Procedure of The 5 MeV IPHI RFQ”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH486, pp. 794-796.
- S. Y. Lee and S. Tepikian, “The Chaotic Dynamical Aperture”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2225-2228.
Back to search