Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Zennaro, P. Craievich, C. P. Hauri, L. Stingelin, A. Trisorio, and C. Vicario, “Compact Electron RF Travelling Wave Gun Photo Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1550-1552. doi:10.18429/JACoW-IPAC2017-TUPAB102
[n] Z. Greenwald and S. Greenwald, “3-D Numerical Field Calculations of CESR's Upgraded Superconducting Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P077, pp. 2547-2549.
[n] H. Hanaki, K. Yanagida, and S. Suzuki, “Development of Integrator Circuit for Charge Monitoring”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP078, pp. 576-578.
[n] C. Vicario et al., “Photocathode Drive Laser for SwissFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB14, pp. 425-428.
[n] T. Schmidt et al., “Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 564-568. doi:10.18429/JACoW-FEL2019-WED01
[n] R. E. Worsham, T. Enegren, D. Dohan, L. Durieu, and R. Poirier, “System for Flat-topping the RF Voltage at TRIUMF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J07, pp. 360-363.
[n] M. F. Reusch and D. L. Bruhwiler, “Transport of Bunched Beams with Space Charge Through a Periodic Lattice”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR08, pp. 3257-3259.
[n] T. A. Jafer, A. Hesham Abdelbagi Ali, and J. Malherbe, “Effects of implantation temperature and annealing on structural evolution and migration of ruthenium in glassy carbon”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR65, unpublished.
[n] S. B. van der Geer and M. J. de Loos, “Applications of the General Particle Tracer Code”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P090, pp. 2577-2579.
[n] R. Defavari et al., “Manufacturing of Ceramic Vacuum Chambers for Sirius On-Axis Kicker”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2457-2460. doi:10.18429/JACoW-IPAC2021-TUPAB400
[n] L. R. Dalesio, D. Dohan, and R. Lange, “A Proposal for Introspection In EPICS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP036, pp. 739-740.
[n] R. Ruo et al., “H- Beam Dynamics Study of a LEBT in XiPAF Project with the WARP PIC Code”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 449-452. doi:10.18429/JACoW-HB2016-WEPM5Y01
[n] J. I. M. Botman et al., “Control Software for EUTERPE”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1820-1823.
[n] R. Ganter et al., “SwissFEL Cathode Load-lock System”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO21, pp. 259-262.
[n] R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n] H. S. Uhm, R. C. Davidson, and I. D. Kaganovich, “Vlasov-Maxwell Description of Axisymmetric Two-Stream Instabilities in High-Intensity Particle Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH104, pp. 1912-1914.
[n] Y. Guo, W. Fang, Y. Lu, and Z. Zhao, “Fabrication and tuning of a 325 MHz ion-injector prototype for particle therapy facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3650-3652. doi:10.18429/JACoW-IPAC2024-THPR58
[n] P. Rojsel, “Beam Stability in Max-II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP093G, pp. 679-681.
[n] H. Schlarb, “Simulation of Dark Current Transport through the TESLA Test Facility Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE039, pp. 1190-1192.
[n] P. Rojsel, “The QSBPM System Performance, and a Comparison to Conventional BPM Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP065L, pp. 1692-1694.
[n] P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 549-553. doi:10.18429/JACoW-ICALEPCS2015-TUC3O04
[n] L. A. Kull and C. B. Williams, “The Influence of Drift Distance on the Attainable Energy Resolution of a Bunched Electron Beam”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1097-1099.
[n] P. Goudket, C. D. Beard, G. Burt, A. C. Dexter, R. M. Jones, and P. A. McIntosh, “Comparison of Stretched-wire, Bead-pull and Numerical Impedance Calculations on 3.9 GHz Dipole Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP128, pp. 859-861.
[n] K. S. Saintin, A. Buteau, V. H. Hardion, and M. Ounsy, “Integrating High Level Applications and Software Components Using a SCADA Tool”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD001, pp. 904-906.
[n] C. B. Williams and M. H. MacGregor, “Space Charge Effects in High Current Linear Electron Accelerator Injection Systems”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 581-586.
[n] Y. Batygin, “Simultaneous acceleration of multiple beams in novel LANSCE front end”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3505-3507. doi:10.18429/JACoW-IPAC2024-THPR12
[n] C. Vicario et al., “Photocathode Laser Wavelength-tuning for Thermal Emittance and Quantum Efficiency Studies”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO86, pp. 434-437.
[n] F. Tamura, H. Yoshikawa, J. Chiba, M. Yoshii, M. Tanaka, and S. Shimazaki, “J-PARC Timing System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU115, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Zennaro, P. Craievich, C. P. Hauri, L. Stingelin, A. Trisorio, and C. Vicario, “Compact Electron RF Travelling Wave Gun Photo Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1550-1552.
- Z. Greenwald and S. Greenwald, “3-D Numerical Field Calculations of CESR's Upgraded Superconducting Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P077, pp. 2547-2549.
- H. Hanaki, K. Yanagida, and S. Suzuki, “Development of Integrator Circuit for Charge Monitoring”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP078, pp. 576-578.
- C. Vicario et al., “Photocathode Drive Laser for SwissFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB14, pp. 425-428.
- T. Schmidt et al., “Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 564-568.
- R. E. Worsham, T. Enegren, D. Dohan, L. Durieu, and R. Poirier, “System for Flat-topping the RF Voltage at TRIUMF”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J07, pp. 360-363.
- M. F. Reusch and D. L. Bruhwiler, “Transport of Bunched Beams with Space Charge Through a Periodic Lattice”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR08, pp. 3257-3259.
- T. A. Jafer, A. Hesham Abdelbagi Ali, and J. Malherbe, “Effects of implantation temperature and annealing on structural evolution and migration of ruthenium in glassy carbon”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR65, unpublished.
- S. B. van der Geer and M. J. de Loos, “Applications of the General Particle Tracer Code”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P090, pp. 2577-2579.
- R. Defavari et al., “Manufacturing of Ceramic Vacuum Chambers for Sirius On-Axis Kicker”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2457-2460.
- L. R. Dalesio, D. Dohan, and R. Lange, “A Proposal for Introspection In EPICS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP036, pp. 739-740.
- R. Ruo et al., “H- Beam Dynamics Study of a LEBT in XiPAF Project with the WARP PIC Code”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 449-452.
- J. I. M. Botman et al., “Control Software for EUTERPE”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1820-1823.
- R. Ganter et al., “SwissFEL Cathode Load-lock System”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO21, pp. 259-262.
- R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3459-3462.
- H. S. Uhm, R. C. Davidson, and I. D. Kaganovich, “Vlasov-Maxwell Description of Axisymmetric Two-Stream Instabilities in High-Intensity Particle Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH104, pp. 1912-1914.
- Y. Guo, W. Fang, Y. Lu, and Z. Zhao, “Fabrication and tuning of a 325 MHz ion-injector prototype for particle therapy facility”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR58, pp. 3650-3652.
- P. Rojsel, “Beam Stability in Max-II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP093G, pp. 679-681.
- H. Schlarb, “Simulation of Dark Current Transport through the TESLA Test Facility Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE039, pp. 1190-1192.
- P. Rojsel, “The QSBPM System Performance, and a Comparison to Conventional BPM Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP065L, pp. 1692-1694.
- P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 549-553.
- L. A. Kull and C. B. Williams, “The Influence of Drift Distance on the Attainable Energy Resolution of a Bunched Electron Beam”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1097-1099.
- P. Goudket, C. D. Beard, G. Burt, A. C. Dexter, R. M. Jones, and P. A. McIntosh, “Comparison of Stretched-wire, Bead-pull and Numerical Impedance Calculations on 3.9 GHz Dipole Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP128, pp. 859-861.
- K. S. Saintin, A. Buteau, V. H. Hardion, and M. Ounsy, “Integrating High Level Applications and Software Components Using a SCADA Tool”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THD001, pp. 904-906.
- C. B. Williams and M. H. MacGregor, “Space Charge Effects in High Current Linear Electron Accelerator Injection Systems”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 581-586.
- Y. Batygin, “Simultaneous acceleration of multiple beams in novel LANSCE front end”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR12, pp. 3505-3507.
- C. Vicario et al., “Photocathode Laser Wavelength-tuning for Thermal Emittance and Quantum Efficiency Studies”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO86, pp. 434-437.
- F. Tamura, H. Yoshikawa, J. Chiba, M. Yoshii, M. Tanaka, and S. Shimazaki, “J-PARC Timing System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU115, pp. XX-XX.
Back to search