Favourites
For Word
[n] H. Xu et al., “Update on septum magnet redesign at LANSCE Proton Storage Ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1143-1146. doi:10.18429/JACoW-NAPAC2025-THP093
[n] W. Chang et al., “Automation of Superconducting Cavity and Superconducting Magnet Operation for FRIB”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 239-241. doi:10.18429/JACoW-NAPAC2022-MOPA83
[n] L. P. Petrosyan, “Improving Perfomance of the MTCA System by use of PCI Express Non-Transparent Bridging and Point-To-Point PCI Express Transactions”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 479. doi:10.18429/JACoW-ICALEPCS2019-MOPHA112
[n] M. Seidel, R. Bospflug, J. Boster, W. Giesske, U. Naujoks, and M. Schwartz, “The Vacuum System for PETRA III”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE037, pp. 2473-2475.
[n] T. Shintake et al., “C-Band Linac RF-System for e+e- Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA20, pp. 1099-1101.
[n] E. M. Lechner, J. W. Angle, C. G. Baxley, M. J. Kelley, and C. E. Reece, “Topographic Evolution of Nitrogen Doped Nb Subjected to Electropolishing”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 207-210. doi:10.18429/JACoW-SRF2023-MOPMB044
[n] D. Gonnella et al., “Cryomodule Testing of Nitrogen-Doped Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB041, pp. 182-186.
[n] X. Zhang, V. D. Shiltsev, and C.-Y. Tan, “Tevatron Admittance Measurement”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP033, pp. 2306-2308.
[n] S. Fukumoto, “Cyclotron versus Synchrotron for Proton Beam Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper J-13, pp. 533-536.
[n] H. Xu, P. Anisimov, W. Barkley, and E. Simakov, “C-band photoinjector radiofrequency cavity design for enhanced beam generation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2061-2063. doi:10.18429/JACoW-IPAC2023-TUPL139
[n] C. Bate, D. Reschke, J. Schaffran, L. Steder, L. Trelle, and H. Weise, “Recent mid-T Single-Cell Treatments R&D at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 129-134. doi:10.18429/JACoW-SRF2023-MOPMB022
[n] H. Iinuma et al., “Beamline Design and Diagnostics for Strong X–Y Coupled Beams Using a Rotating Quadrupole”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5620, unpublished.
[n] I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2123-2126. doi:10.18429/JACoW-IPAC2023-TUPL162
[n] T. Tran et al., “Standardizing UI/UX across accelerator labs”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1491-1496. doi:10.18429/JACoW-ICALEPCS2025-THMG009
[n] H. Xu et al., “Design of a two-cell C-band accelerator cavity with higher-order mode damping”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 989-991. doi:10.18429/JACoW-IPAC2024-TUPC02
[n] T. Glasmacher, “Building the Facility for Rare Isotope Beams”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper MOXX02, unpublished.
[n] L. Popielarski et al., “SRF Highbay Technical Infrastructure for FRIB Production at Michigan State University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP046, pp. 954-956.
[n] J. May-Mann and R. G. Eichhorn, “Simulation of Geometry Dependent Flux Trapping”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB013, pp. 105-109.
[n] H. Ao, K. Elliott, D. D. Jager, S. H. Kim, and L. Popielarski, “FRIB Driver Linac Integration to Support Operations and Protect SRF Cryomodules”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 316-318. doi:10.18429/JACoW-SRF2023-MOPMB084
[n] R. Martin, C. Hatch, and S. Baily, “Object-oriented industrial I/O for EPICS on NI cRIO: reusable LabVIEW-FPGA bitfiles via the NI C API”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD021, unpublished.
[n] T. Tran et al., “Standardizing UI/UX across accelerator labs”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD094, unpublished.
[n] A. Braido et al., “Upgrade of the Los Alamos Neutron Science Center (LANSCE) Beam Chopper Pattern Generator”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD036, unpublished.
[n] R. Wanzenberg, M. Bieler, J. Keil, G. Sahoo, and M. Schaumann, “PETRA III operation and studies in 2022”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 415-417. doi:10.18429/JACoW-IPAC2023-MOPA155
[n] M. D'Andrea et al., “Crystal collimation performance at the LHC with a 6.8 TeV proton beam”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 563-566. doi:10.18429/JACoW-IPAC2023-MOPL023
[n] R. G. Eichhorn, C. Egerer, and V. Veshcherevich, “Low Kick Coupler for Superconducting Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP019, pp. 876-878.
[n] S. J. Payne et al., “Beam Diagnostics at ISIS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF10, pp. 466-471.
[n] M. Wilinski et al., “Improvements for Operational Baseband Tune and Coupling Measurements and Feedback at RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM068, pp. 333-337.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Xu et al., “Update on septum magnet redesign at LANSCE Proton Storage Ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1143-1146.
- W. Chang et al., “Automation of Superconducting Cavity and Superconducting Magnet Operation for FRIB”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 239-241.
- L. P. Petrosyan, “Improving Perfomance of the MTCA System by use of PCI Express Non-Transparent Bridging and Point-To-Point PCI Express Transactions”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 479.
- M. Seidel, R. Bospflug, J. Boster, W. Giesske, U. Naujoks, and M. Schwartz, “The Vacuum System for PETRA III”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE037, pp. 2473-2475.
- T. Shintake et al., “C-Band Linac RF-System for e+e- Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA20, pp. 1099-1101.
- E. M. Lechner, J. W. Angle, C. G. Baxley, M. J. Kelley, and C. E. Reece, “Topographic Evolution of Nitrogen Doped Nb Subjected to Electropolishing”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB044, pp. 207-210.
- D. Gonnella et al., “Cryomodule Testing of Nitrogen-Doped Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB041, pp. 182-186.
- X. Zhang, V. D. Shiltsev, and C.-Y. Tan, “Tevatron Admittance Measurement”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP033, pp. 2306-2308.
- S. Fukumoto, “Cyclotron versus Synchrotron for Proton Beam Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper J-13, pp. 533-536.
- H. Xu, P. Anisimov, W. Barkley, and E. Simakov, “C-band photoinjector radiofrequency cavity design for enhanced beam generation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL139, pp. 2061-2063.
- C. Bate, D. Reschke, J. Schaffran, L. Steder, L. Trelle, and H. Weise, “Recent mid-T Single-Cell Treatments R&D at DESY”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB022, pp. 129-134.
- H. Iinuma et al., “Beamline Design and Diagnostics for Strong X–Y Coupled Beams Using a Rotating Quadrupole”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5620, this conference.
- I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL162, pp. 2123-2126.
- T. Tran et al., “Standardizing UI/UX across accelerator labs”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1491-1496.
- H. Xu et al., “Design of a two-cell C-band accelerator cavity with higher-order mode damping”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC02, pp. 989-991.
- T. Glasmacher, “Building the Facility for Rare Isotope Beams”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper MOXX02, unpublished.
- L. Popielarski et al., “SRF Highbay Technical Infrastructure for FRIB Production at Michigan State University”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP046, pp. 954-956.
- J. May-Mann and R. G. Eichhorn, “Simulation of Geometry Dependent Flux Trapping”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB013, pp. 105-109.
- H. Ao, K. Elliott, D. D. Jager, S. H. Kim, and L. Popielarski, “FRIB Driver Linac Integration to Support Operations and Protect SRF Cryomodules”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB084, pp. 316-318.
- R. Martin, C. Hatch, and S. Baily, “Object-oriented industrial I/O for EPICS on NI cRIO: reusable LabVIEW-FPGA bitfiles via the NI C API”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD021, unpublished.
- T. Tran et al., “Standardizing UI/UX across accelerator labs”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD094, unpublished.
- A. Braido et al., “Upgrade of the Los Alamos Neutron Science Center (LANSCE) Beam Chopper Pattern Generator”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD036, unpublished.
- R. Wanzenberg, M. Bieler, J. Keil, G. Sahoo, and M. Schaumann, “PETRA III operation and studies in 2022”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA155, pp. 415-417.
- M. D'Andrea et al., “Crystal collimation performance at the LHC with a 6.8 TeV proton beam”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL023, pp. 563-566.
- R. G. Eichhorn, C. Egerer, and V. Veshcherevich, “Low Kick Coupler for Superconducting Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP019, pp. 876-878.
- S. J. Payne et al., “Beam Diagnostics at ISIS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF10, pp. 466-471.
- M. Wilinski et al., “Improvements for Operational Baseband Tune and Coupling Measurements and Feedback at RHIC”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM068, pp. 333-337.
Back to search