Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4644-4646. doi:10.18429/JACoW-IPAC2017-THPVA082
[n] K. Hatanaka and H. Nonaka, “ECR Ion Source for the Injector AVF Cyclotron at Riken”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1138-1140.
[n] W. W. Lee, R. C. Davidson, H. Qin, and E. A. Startsev, “Electromagnetic (Darwin) Model for Three-Dimensional Perturbative Particle Simulation of High Intensity Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH101, pp. 1906-1908.
[n] C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
[n] P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
[n] O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
[n] T. Lefevre, P. Gouard, J. T. Donohue, and J. L. Rullier, “Recent Results from the FEL Driven Two-Beam Accelerator Project at CESTA”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC08, pp. 872-874.
[n] C. Hovater, “The CEBAF RF Separator System”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP12, pp. 77-79.
[n] H. Podlech, H. H?ñhnel, H. H?Âltermann, B. Koubek, and U. Ratzinger, “Tuning and RF Measurements of the LILAC RFQ”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 90-92. doi:10.18429/JACoW-HIAT2022-TUP09
[n] C. Doose, L. Emery, and S. H. Kim, “Investigation of the Surface Resistivity Tolerance of the Kicker Ceramic Vacuum Chamber at APS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH120, pp. 1491-1493.
[n] N. Chauvin et al., “Final Design of the IFMIF-EVEDA Low Energy Beam Transport Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP004, pp. 3190-3192.
[n] E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Scheme for Generation of Single 100 GW 300-as Pulse in the X-ray SASE FEL with the Use of a Few Cycles Optical Pulse from Ti:sapphire Laser System”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOBOS02, pp. XX-XX.
[n] V. A. Dolgashev, Z. Li, S. G. Tantawi, A. D. Yeremian, Y. Higashi, and B. Spataro, “Status of High Power Tests of Normal Conducting Short Standing Wave Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC071, pp. 241-243.
[n] M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n] S. Y. Xu, S. X. Fang, and S. Wang, “The Study of Space Charge Effects for CSNS”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A03, pp. 420-424.
[n] E. Gjonaj et al., “Large Scale Parallel Wake Field Computations for 3D-Accelerator Structures with the PBCI Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOM2IS02, pp. 29-34.
[n] B. R. Poole, G. J. Caporaso, Y. J. Chen, and L.-F. Wang, “Analysis and Modeling of a Stripline Beam Kicker and Septum”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4029, pp. 457-459.
[n] A. A. Aksoy, A. A. Aydin, C. Kaya, B. Ketenoglu, and O. Yavas, “TARLA: The First Facility of Turkish Accelerator Center (TAC)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2776-2778. doi:10.18429/JACoW-IPAC2017-WEPAB087
[n] P. Müller and H. Hähnel, “Measurement of dielectric properties of 3D printed polymer-based materials for RF applications at 500 MHz”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7170, unpublished.
[n] Z. A. Conway, J. D. Fuerst, M. Kedzie, M. P. Kelly, and K. W. Shepard, “Electromagnetic and Mechanical Mode Interactions of Spoke-loaded Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP31, pp. 308-308.
[n] R. T. Keane, H. Bui, G. Decker, M. Hahne, P. Leban, and C. Wimmer, “Evaluation of a Variety of Photon Beam Position Monitor Data Acquisition Methodologies at the APS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG011, pp. 47-49.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4644-4646.
- K. Hatanaka and H. Nonaka, “ECR Ion Source for the Injector AVF Cyclotron at Riken”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1138-1140.
- W. W. Lee, R. C. Davidson, H. Qin, and E. A. Startsev, “Electromagnetic (Darwin) Model for Three-Dimensional Perturbative Particle Simulation of High Intensity Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH101, pp. 1906-1908.
- C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
- P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
- O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
- T. Lefevre, P. Gouard, J. T. Donohue, and J. L. Rullier, “Recent Results from the FEL Driven Two-Beam Accelerator Project at CESTA”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC08, pp. 872-874.
- C. Hovater, “The CEBAF RF Separator System”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP12, pp. 77-79.
- H. Podlech, H. H?ñhnel, H. H?Âltermann, B. Koubek, and U. Ratzinger, “Tuning and RF Measurements of the LILAC RFQ”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 90-92.
- C. Doose, L. Emery, and S. H. Kim, “Investigation of the Surface Resistivity Tolerance of the Kicker Ceramic Vacuum Chamber at APS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH120, pp. 1491-1493.
- N. Chauvin et al., “Final Design of the IFMIF-EVEDA Low Energy Beam Transport Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP004, pp. 3190-3192.
- E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Scheme for Generation of Single 100 GW 300-as Pulse in the X-ray SASE FEL with the Use of a Few Cycles Optical Pulse from Ti:sapphire Laser System”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOBOS02, pp. XX-XX.
- V. A. Dolgashev, Z. Li, S. G. Tantawi, A. D. Yeremian, Y. Higashi, and B. Spataro, “Status of High Power Tests of Normal Conducting Short Standing Wave Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC071, pp. 241-243.
- M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS41, pp. 3827-3829.
- S. Y. Xu, S. X. Fang, and S. Wang, “The Study of Space Charge Effects for CSNS”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A03, pp. 420-424.
- E. Gjonaj et al., “Large Scale Parallel Wake Field Computations for 3D-Accelerator Structures with the PBCI Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOM2IS02, pp. 29-34.
- B. R. Poole, G. J. Caporaso, Y. J. Chen, and L.-F. Wang, “Analysis and Modeling of a Stripline Beam Kicker and Septum”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4029, pp. 457-459.
- A. A. Aksoy, A. A. Aydin, C. Kaya, B. Ketenoglu, and O. Yavas, “TARLA: The First Facility of Turkish Accelerator Center (TAC)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2776-2778.
- P. Müller and H. Hähnel, “Measurement of dielectric properties of 3D printed polymer-based materials for RF applications at 500 MHz”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7170, this conference.
- Z. A. Conway, J. D. Fuerst, M. Kedzie, M. P. Kelly, and K. W. Shepard, “Electromagnetic and Mechanical Mode Interactions of Spoke-loaded Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP31, pp. 308-308.
- R. T. Keane, H. Bui, G. Decker, M. Hahne, P. Leban, and C. Wimmer, “Evaluation of a Variety of Photon Beam Position Monitor Data Acquisition Methodologies at the APS”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG011, pp. 47-49.
Back to search