Favourites
For Word
[n] Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
[n] J. Sauza-Bedolla et al., “Preserving Micron Tolerances Through the Assembly Process of an X-band Accelerating Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 377-379. doi:10.18429/JACoW-LINAC2018-TUPO023
[n] B. Forgacs and X. Rao, “Design automation of pre-separator wedges for FRIB advanced rare isotope separator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3549-3551. doi:10.18429/JACoW-IPAC2024-THPR25
[n] C. G. Pang, P. Bambade, Y. Funakoshi, and S. Uehara, “Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2250-2253. doi:10.18429/JACoW-IPAC2018-WEPAL037
[n] A. L. Zhang, B. J. Cui, Y. X. Jiang, T. H. Ma, S. X. Peng, and W. B. Wu, “TOWARD A HIGH-TEMPERATURE SURFACE MICROWAVE SOURCE FOR ION IMPLANTATION”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG033, unpublished.
[n] I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 776-779. doi:10.18429/JACoW-IPAC2023-MOPL095
[n] T. Toyama et al., “Performance of the Main Ring BPM during the Beam Commissioning at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE012, pp. 981-983.
[n] A. Masi et al., “The CERN nTOF Facility Data Acquisition System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1900-1905. doi:10.18429/JACoW-ICALEPCS2017-THPHA195
[n] C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2239-2241. doi:10.18429/JACoW-IPAC2021-TUPAB318
[n] P. Snopok, M. Berz, B. T. Loseth, K. Makino, and H. Zhang, “Space Charge Simulation in COSY Using Fast Multipole Method”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA11, pp. 195-197.
[n] M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 968-970. doi:10.18429/JACoW-IPAC2019-MOPTS048
[n] R. Ganter et al., “Commissioning of a Diode / RF Photogun Combination”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC35, pp. 317-320.
[n] C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-MEDSI2016-MOPE18
[n] M. Campostrini, L. Bellan, F. Grespan, C. Roncolato, M. Taborelli, and W. Vollenberg, “RF window Ti coating characterization”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7153, unpublished.
[n] V. Fusco, M. Ferrario, C. Ronsivalle, and C. R. Frascati, “Spatial Autocorrelation for Transverse Beam Quality Characterization”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC027, pp. 1107-1109.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
- J. Sauza-Bedolla et al., “Preserving Micron Tolerances Through the Assembly Process of an X-band Accelerating Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 377-379.
- B. Forgacs and X. Rao, “Design automation of pre-separator wedges for FRIB advanced rare isotope separator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR25, pp. 3549-3551.
- C. G. Pang, P. Bambade, Y. Funakoshi, and S. Uehara, “Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2250-2253.
- A. L. Zhang, B. J. Cui, Y. X. Jiang, T. H. Ma, S. X. Peng, and W. B. Wu, “TOWARD A HIGH-TEMPERATURE SURFACE MICROWAVE SOURCE FOR ION IMPLANTATION”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG033, unpublished.
- I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL095, pp. 776-779.
- T. Toyama et al., “Performance of the Main Ring BPM during the Beam Commissioning at J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE012, pp. 981-983.
- A. Masi et al., “The CERN nTOF Facility Data Acquisition System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1900-1905.
- C. F. Chang, C. Y. Chang, C. Y. Liu, and H. Y. Yan, “The Beamline Safety Interlock System of Taiwan Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2239-2241.
- P. Snopok, M. Berz, B. T. Loseth, K. Makino, and H. Zhang, “Space Charge Simulation in COSY Using Fast Multipole Method”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA11, pp. 195-197.
- M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 968-970.
- R. Ganter et al., “Commissioning of a Diode / RF Photogun Combination”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC35, pp. 317-320.
- C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 41-43.
- M. Campostrini, L. Bellan, F. Grespan, C. Roncolato, M. Taborelli, and W. Vollenberg, “RF window Ti coating characterization”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7153, this conference.
- V. Fusco, M. Ferrario, C. Ronsivalle, and C. R. Frascati, “Spatial Autocorrelation for Transverse Beam Quality Characterization”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC027, pp. 1107-1109.
Back to search
