Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. H. Qu et al., “3D Model Analysis of Cavity for CSNS DTL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4236-4238. doi:10.18429/JACoW-IPAC2017-THPIK061
[n] X. L. Su et al., “Measurement of Electron Bunch Length via a Tunable-Gap Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 295-297. doi:10.18429/JACoW-IPAC2017-MOPAB075
[n] E. R. Moog et al., “Magnetic Performance of Insertion Devices at the Advanced Photon Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C012, pp. 3224-3226.
[n] N. Rouvi?¿re et al., “Status of the Vacuum System for the IPHI Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO017, pp. 2586-2588.
[n] P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1226-1229. doi:10.18429/JACoW-IPAC2022-TUPOTK014
[n] E. Wang et al., “Fabrication of Alkali Antimonide Photocathode for SRF Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 742-744. doi:10.18429/JACoW-IPAC2014-MOPRI059
[n] R. Littauer, “Multibunch Operation of CESR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1610-1614.
[n] G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 683. doi:10.18429/JACoW-ICALEPCS2019-TUAPP05
[n] M. Seidel, “Welcome to IPAC??20 and Opening Remarks by the OC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR01, pp. XX-XX.
[n] R. A. Legg, W. Graves, T. L. Grimm, and P. Piot, “Half Wave Injector Design for WiFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD012, pp. 469-471.
[n] R. Corsini, J. Gardelle, C. D. Johnson, and J. Grenier, “CLIC Drive Beam Generation by Induction Linac and FEL Experimental Studies for the CERN Linear Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 626-629.
[n] A. Lasheen, H. Damerau, J. Repond, M. Schwarz, and E. N. Shaposhnikova, “Improvement of the Longitudinal Beam Transfer from PS to SPS at CERN”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3060-3063. doi:10.18429/JACoW-IPAC2018-THPAF042
[n] L. Groening, H. H. Braun, S. Döbert, I. Wilson, and W. Wuensch, “Status of CLIC High-Gradient Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH039, pp. 852-854.
[n] C. Nieter, J. R. Cary, P. Stoltz, and G. R. Werner, “VORPAL as a Tool for Three-Dimensional Simulations of Multipacting in Superconducting RF Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT098, pp. 4332-4334.
[n] S. Harave, B. Lam, C. Herr, J. Tagle, J. Hugyik, and M. Larrus, “LCLS II DC magnet power supplies – an overview”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3751-3753. doi:10.18429/JACoW-IPAC2024-THPS12
[n] V. Ptitsyn, A. Marusic, R. J. Michnoff, M. G. Minty, G. Robert-Demolaize, and T. Satogata, “Slow Orbit Feedback at RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM108, pp. 469-472.
[n] M. E. Angoletta et al., “Beam Commissioning of the New Digital Low-Level RF System for CERNÔÇÖs AD”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 911-914. doi:10.18429/JACoW-IPAC2022-TUPOST025
[n] J. Shi and G. Hoffstaetter, “Method of Perturbative-PIC Simulation for Interactions between a Bunch and Its Synchrotron Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS045, pp. 3594-3596.
[n] R. Burke, S. Fenster, and S. Grammel, “Systems Analysis of Accelerator and Storage Ring Systems for Inertial Fusion”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 996-999.
[n] D. Carbajo Perez et al., “New Generation CERN LHC Injection Dump - Assembly and Installation (TDIS)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3548-3551. doi:10.18429/JACoW-IPAC2021-WEPAB361
[n] P. F. Dahl et al., “Superconducting Magnet Models for ISABELLE”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 688-693.
[n] B. Henrist, P. Costa Pinto, S. Fiotakis, M. Himmerlich, and C. Kouzios, “Large scale production of amorphous carbon coatings for the new beam screens of the HL-LHC project”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7175, unpublished.
[n] J. Yan, S. M. Hartman, and K.-U. Kasemir, “Control Systems Design for STS Accelerator”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 903-906. doi:10.18429/JACoW-ICALEPCS2023-TUPDP136
[n] S. Bielawski et al., “Improving the Sensitivity of Existing Electro-Optic Sampling Setups by Adding Brewster Plates: Tests of the Strategy at SOLEIL”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 164-167. doi:10.18429/JACoW-IBIC2017-TUPCC08
[n] P. Ausset et al., “Status Report on the Saclay High-Intensity Proton Injector Project IPHI”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF202, pp. 283-285.
[n] B. Koubek, A. Schempp, J. S. Schmidt, and L. Groening, “Status of the 325 MHz 4-ROD RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP037, pp. 3815-3817.
[n] K. M. Wilson et al., “Managing Procurements in the Time of Covid-19: SNS-PPU as a Case Study”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 863. doi:10.18429/JACoW-SRF2021-THPTEV014
[n] P. Dhakal, B. Khanal, E. Lechner, and G. Ciovati, “Impact of medium temperature heat treatment on flux trapping sensitivity in SRF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2764-2767. doi:10.18429/JACoW-IPAC2024-WEPS33
[n] V. Mironov, S. L. Bogomolov, A. E. Bondarchenko, A. A. Efremov, K. I. Kuzmenkov, and V. N. Loginov, “Simulations of ECRIS Performance for Different Working Materials”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 170-175. doi:10.18429/JACoW-ECRIS2018-WEB1
[n] C. Joly et al., “RF system status for PERLE”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6146, unpublished.
[n] R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “The Tevatron AC Dipole System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS005, pp. 3868-3870.
[n] H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 431-434. doi:10.18429/JACoW-LINAC2018-TUPO043
[n] M. A. Kempkes, N. Butler, J. A. Casey, M. P. J. Gaudreau, and I. Roth, “Solid State Modulators for the International Linear Collider (ILC)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH146, pp. 3131-3133.
[n] J. R. Zhang et al., “Overall Design of the CEPC Injector LINAC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 139. doi:10.18429/JACoW-eeFACT2018-TUPAB04
[n] S.-W. Lee et al., “Test cavity and Iris-to-Coax transition for tuning and high-power verification of SNS DTL iris couplers”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7321, unpublished.
[n] M. Polyanskiy, M. Babzien, D. Choge, W. Li, M. Palmer, and I. Pogorelsky, “Status and perspectives of multi-terawatt long-wave infrared lasers for particle acceleration research”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS127, unpublished.
[n] J. Lewellen et al., “The LANSCE Accelerator Modernization Project (LAMP): Status and Recent Progress”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4328, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- P. H. Qu et al., “3D Model Analysis of Cavity for CSNS DTL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4236-4238.
- X. L. Su et al., “Measurement of Electron Bunch Length via a Tunable-Gap Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 295-297.
- E. R. Moog et al., “Magnetic Performance of Insertion Devices at the Advanced Photon Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C012, pp. 3224-3226.
- N. Rouvi?¿re et al., “Status of the Vacuum System for the IPHI Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO017, pp. 2586-2588.
- P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1226-1229.
- E. Wang et al., “Fabrication of Alkali Antimonide Photocathode for SRF Gun”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 742-744.
- R. Littauer, “Multibunch Operation of CESR”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1610-1614.
- G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 683.
- M. Seidel, “Welcome to IPAC??20 and Opening Remarks by the OC Chairman”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOOR01, pp. XX-XX.
- R. A. Legg, W. Graves, T. L. Grimm, and P. Piot, “Half Wave Injector Design for WiFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD012, pp. 469-471.
- R. Corsini, J. Gardelle, C. D. Johnson, and J. Grenier, “CLIC Drive Beam Generation by Induction Linac and FEL Experimental Studies for the CERN Linear Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 626-629.
- A. Lasheen, H. Damerau, J. Repond, M. Schwarz, and E. N. Shaposhnikova, “Improvement of the Longitudinal Beam Transfer from PS to SPS at CERN”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3060-3063.
- L. Groening, H. H. Braun, S. Döbert, I. Wilson, and W. Wuensch, “Status of CLIC High-Gradient Studies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH039, pp. 852-854.
- C. Nieter, J. R. Cary, P. Stoltz, and G. R. Werner, “VORPAL as a Tool for Three-Dimensional Simulations of Multipacting in Superconducting RF Cavities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT098, pp. 4332-4334.
- S. Harave, B. Lam, C. Herr, J. Tagle, J. Hugyik, and M. Larrus, “LCLS II DC magnet power supplies – an overview”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS12, pp. 3751-3753.
- V. Ptitsyn, A. Marusic, R. J. Michnoff, M. G. Minty, G. Robert-Demolaize, and T. Satogata, “Slow Orbit Feedback at RHIC”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM108, pp. 469-472.
- M. E. Angoletta et al., “Beam Commissioning of the New Digital Low-Level RF System for CERNÔÇÖs AD”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 911-914.
- J. Shi and G. Hoffstaetter, “Method of Perturbative-PIC Simulation for Interactions between a Bunch and Its Synchrotron Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS045, pp. 3594-3596.
- R. Burke, S. Fenster, and S. Grammel, “Systems Analysis of Accelerator and Storage Ring Systems for Inertial Fusion”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 996-999.
- D. Carbajo Perez et al., “New Generation CERN LHC Injection Dump - Assembly and Installation (TDIS)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3548-3551.
- P. F. Dahl et al., “Superconducting Magnet Models for ISABELLE”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 688-693.
- B. Henrist, P. Costa Pinto, S. Fiotakis, M. Himmerlich, and C. Kouzios, “Large scale production of amorphous carbon coatings for the new beam screens of the HL-LHC project”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7175, this conference.
- J. Yan, S. M. Hartman, and K.-U. Kasemir, “Control Systems Design for STS Accelerator”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP136, pp. 903-906.
- S. Bielawski et al., “Improving the Sensitivity of Existing Electro-Optic Sampling Setups by Adding Brewster Plates: Tests of the Strategy at SOLEIL”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 164-167.
- P. Ausset et al., “Status Report on the Saclay High-Intensity Proton Injector Project IPHI”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF202, pp. 283-285.
- B. Koubek, A. Schempp, J. S. Schmidt, and L. Groening, “Status of the 325 MHz 4-ROD RFQ”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP037, pp. 3815-3817.
- K. M. Wilson et al., “Managing Procurements in the Time of Covid-19: SNS-PPU as a Case Study”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 863.
- P. Dhakal, B. Khanal, E. Lechner, and G. Ciovati, “Impact of medium temperature heat treatment on flux trapping sensitivity in SRF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS33, pp. 2764-2767.
- V. Mironov, S. L. Bogomolov, A. E. Bondarchenko, A. A. Efremov, K. I. Kuzmenkov, and V. N. Loginov, “Simulations of ECRIS Performance for Different Working Materials”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 170-175.
- C. Joly et al., “RF system status for PERLE”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6146, this conference.
- R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “The Tevatron AC Dipole System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS005, pp. 3868-3870.
- H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 431-434.
- M. A. Kempkes, N. Butler, J. A. Casey, M. P. J. Gaudreau, and I. Roth, “Solid State Modulators for the International Linear Collider (ILC)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH146, pp. 3131-3133.
- J. R. Zhang et al., “Overall Design of the CEPC Injector LINAC”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 139.
- S.-W. Lee et al., “Test cavity and Iris-to-Coax transition for tuning and high-power verification of SNS DTL iris couplers”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7321, this conference.
- M. Polyanskiy, M. Babzien, D. Choge, W. Li, M. Palmer, and I. Pogorelsky, “Status and perspectives of multi-terawatt long-wave infrared lasers for particle acceleration research”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS127, unpublished.
- J. Lewellen et al., “The LANSCE Accelerator Modernization Project (LAMP): Status and Recent Progress”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4328, this conference.
Back to search