JaCoW Logo

Reference Search

Favourites


For Word

[n]	T. Adachi et al., “Phase Space Painting Of Charge Exchange Injection in the KEK Booster”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP24C, pp. 2137-2139. 
[n]	J. Serrano, P. Alvarez, D. Autiero, and J. Lewis, “Inter-laboratory Synchronization for the CNGS Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH125, pp. 3092-3094. 
[n]	J. W. McKenzie et al., “Bunch Length Measurements using a Transverse Deflecting Cavity on VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 323-326. doi:10.18429/JACoW-IPAC2016-MOPMR035
[n]	F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519. 
[n]	L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749. 
[n]	S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868. 
[n]	J. Safranek and P. M. Stefan, “Emittance Measurement at the NSLS X-Ray Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP006L, pp. 1573-1575. 
[n]	R. J. Nawrocky and R. F. Lambiase, “Pulsed Power Supply System for the Fast" Quadrupoles in the AGS"”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2772-2775. 
[n]	C. G. Trahern et al., “Relational Databases for RHIC Design and Control”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1806-1809. 
[n]	J. M. Cavedon et al., “An Accelerator for Testing Superconducting RF Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 52-54. 
[n]	D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705. 
[n]	X. R. Hao, “HOMs Extraction Structure Design for HEPS 166.6 MHz Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 403-407. doi:10.18429/JACoW-SRF2019-TUP008
[n]	J. H. Lewis, J. Serrano, and P. Alvarez, “The LHC Central Timing Hardware Implementation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB02, pp. 400-402. 
[n]	W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3449-3452. doi:10.18429/JACoW-IPAC2024-THPG78
[n]	M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523. 
[n]	S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898. 
[n]	S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 519-521. doi:10.18429/JACoW-RUPAC2016-WEPSB069
[n]	I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746. 
[n]	J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030. 
[n]	X. Y. Zhang et al., “Mechanical Design and Horizontal Tests of a Dressed 166.6 MHz Quarter-wave ?=1 SRF Cavity System”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 408-412. doi:10.18429/JACoW-SRF2019-TUP010
[n]	A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n]	P. Wang et al., “High Power Test of the S-Band Spherical Pulse Compressor at Tsinghua University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4008-4010. doi:10.18429/JACoW-IPAC2018-THPAL153
[n]	J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3234-3237. 
[n]	Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263. 
[n]	F. Bordry et al., “LEP Operation in 1992 with a 90[degree] Optics”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2001-2004. 
[n]	T. Nakamura et al., “Suppression of Transverse Instabilities by Chromaticity Modulation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBRA02, pp. 3647-3649. 
[n]	L. Liu et al., “Status of Sirius operation with users”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 228-231. doi:10.18429/JACoW-IPAC2025-MOPB089
[n]	W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 92-98. doi:10.18429/JACoW-ICALEPCS2017-MODPL02
[n]	S. Suzuki, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and Y. Shoji, “Bunch Compression using the Transport Line and Short Bunch revolving in NewSUBARU”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA05, pp. 619-621. 
[n]	A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 204-207. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search