JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. Herr and J. Miles, “Goal Programming Algorithms for Closed Orbit Correction”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 920-923. 
[n]	M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1344-1347. doi:10.18429/JACoW-ICALEPCS2017-THPHA003
[n]	J. W. Staples and T. Schenkel, “High-Efficiency Matching Network for RF-Driven Ion Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH014, pp. 2108-2110. 
[n]	J. L. Conradie, “CYCLOTRONS AT ITHEMBA LABS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20A2, pp. XX-XX. 
[n]	D. E. Anderson, “Developments in Solid-State Modulator Technology Towards High Availability”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4GRI02, pp. 117-121. 
[n]	G. Franchetti et al., “The S317 Experiment on High Intensity Beam Loss and Emittance Growth”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA22, pp. 128-130. 
[n]	A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX. 
[n]	V. Baldini et al., “ESPRESSO Instrument Control Electronics and Software: Final Phases Before the Installation in Chile”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 891-894. doi:10.18429/JACoW-ICALEPCS2017-TUPHA195
[n]	E. Boltezar et al., “Review and Status of the CERN New 50 MeV Linac Project”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper A06, pp. 45-48. 
[n]	N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 215-218. doi:10.18429/JACoW-IBIC2018-TUPA03
[n]	C. E. Reece, E. Ciancio, K. A. Keyes, and D. Yang, “A Study of the Effectiveness of Particulate Cleaning Protocols on Intentionally Contaminated Niobium Surfaces”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO062, pp. 746-750. 
[n]	R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP02, unpublished. 
[n]	A. Yu. Zelinsky, I. M. Karnaukhov, and A. A. Shcherbakov, “A Polarized Electron Beam in the Pulse Stretcher Ring PSR-2000”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 688-691. 
[n]	H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169. 
[n]	S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3097-3100. 
[n]	V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 94-99. doi:10.18429/JACoW-RUPAC2018-THXMH01
[n]	R. Cirami et al., “An OPC-UA Based Architecture for the Control of the ESPRESSO Spectrograph @ VLT”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB07, pp. 70-73. 
[n]	D. L. Birx, S. A. Hawkins, S. E. Poor, L. L. Reginato, and M. W. Smith, “Technology of Magnetically Driven Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2743-2748. 
[n]	Y. Luo, W. Fischer, A. Marusic, and M. G. Minty, “Measurement and Simulation of Betatron Coupling Beam Transfer Function in RHIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 99-101. doi:10.18429/JACoW-IPAC2018-MOPMF010
[n]	P. J. Celliers and E. J. S. Franklin, “Micro-Controlled Vacuum Systems at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-08, pp. 664-667. 
[n]	F. Naito et al., “Study of the ACS Cavity Without a Bridge Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP073, pp. 596-598. 
[n]	Y. M. Pischalnikov, C. Contreras-Martinez, and J. C. Yun, “Testing of the Piezo-actuators at High Dynamic Rate Operational Conditions”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 656-659. doi:10.18429/JACoW-SRF2019-TUP084
[n]	H. Takaki et al., “The Lattice of the 1.0 GeV VSX Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP73, pp. 2436-2438. 
[n]	P. Desire Valdor, S. Di Mitri, A. Gerbershagen, and A. Latina, “Benchmarking Intrabeam Scattering with RF-Track”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2333-2336. doi:10.18429/JACoW-IPAC2025-WEPS042
[n]	E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520. 
[n]	C. Ohmori et al., “Developments of Magnetic Alloy Cores with Higher Impedance for J-PARC Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA016, pp. 3711-3713. 
[n]	M. Zaera-Sanz, J. Burdalo Gil, I. Romera, R. Schmidt, and M. Zerlauth, “Design, Development and Implementation of a Dependable Interlocking Prototype for the ITER Superconducting Magnet Powering System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC058, pp. 230-233. 
[n]	Y. W. Kang et al., “Development and Testing of High Power RF Vector Modulators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS075, pp. 2508-2510. 
[n]	J. Z. Xu et al., “Linac Coherent Light Source (LCLS) Undulator Line Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP091, pp. 290-292. 
[n]	P. Lee and L. Smith, “Analysis of Resonant Longitudinal Instability in a Heavy Ion Induction Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1737-1740. 
[n]	K. C. Harkay et al., “Beam-based Alignment of the First Superconducting Undulator at APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM07, pp. 1058-1060. 
[n]	K. C. Harkay et al., “Beam-Induced Heat Load Predictions and Measurements in the APS Superconducting Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM06, pp. 1055-1057. 
[n]	D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC84, unpublished. 
[n]	H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957. 
[n]	J. Feng et al., “Drive Laser System for the Advanced Photo-Injector Project at the LBNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP222, pp. 2537-2539. 
[n]	A. Waitz and A. Donaldson, “An Isolated Data Acquisition System for High Voltage Applications”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2056-2059. 
[n]	K. Kaspar, “The Prestripper Accelerator of the Unilac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B04, pp. 73-80. 
[n]	P. V. Bogdanov et al., “Experience of the MGC-20 Operation and its Prospects”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-04, pp. 673-676. 
[n]	T. J. P. Ellison, R. J. Brown, and D. L. Friesel, “Status and Performance of the IUCF 270 KeV Electron Cooling System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 633-636. 
[n]	K. Hatanaka et al., “Present Status of the RCNP Cyclotron Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB035, pp. 349-351. 
[n]	B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n]	Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250. 
[n]	A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280. 
[n]	W. Lawson et al., “Initial Operation of the Maryland Coaxial Gyroklystron Experiment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P038, pp. 3168-3170. 
[n]	A. Boccardi, M. Barros Marin, T. E. Levens, B. Szuk, W. Vigano, and C. Zamantzas, “A Modular Approach to Acquisition Systems for Future CERN Beam Instrumentation Developments”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1103-1106. doi:10.18429/JACoW-ICALEPCS2015-THHB2O02
[n]	J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1500-1505. 
[n]	F. M. Velotti, M. A. Fraser, B. Goddard, V. Kain, and L. S. Stoel, “Tracking Simulations of Shadowing Electrostatic Septum Wires by Means of Bent Crystals”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2395-2398. doi:10.18429/JACoW-IPAC2019-WEPMP032
[n]	X. H. Liao, Y. Li, M. F. Meng, X. X. Wang, and Q. L. Zhao, “Study on the Oxide Cathode for HIRFL-CSR Electron Cooler”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THPMCP012, pp. 160-163. 
[n]	J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371. 
[n]	K. C. Mittal et al., “Development of 3 MeV, 30 kW DC Electron Accelerator at EBC, Kharghar”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA043, pp. 682-684. 
[n]	B. T. Freemire et al., “Electron Recombination in a Dense Hydrogen Plasma”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC039, pp. 217-219. 
[n]	A. I. Drozhdin et al., “Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH053, pp. 2569-2571. 
[n]	J. Jiang, H. B. Chen, J. Shi, P. Wang, L. Zhang, and S. X. Zheng, “C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 386-388. doi:10.18429/JACoW-IPAC2016-MOPMR060
[n]	P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281. 
[n]	D. H. H. Hoffmann et al., “Heavy Ion Beams for Intertial Confinement Fusion and Recent Experimental Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 191-196. 
[n]	J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387. 
[n]	C. Thompson, “Experience with the LAMPF Line D Fast Kicker System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3913-3916. 
[n]	V. C. Sahni et al., “Indian Participation in LHC, SPL and CTF-3 Projects at CERN, Switzerland”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA131, pp. 829-831. 
[n]	Q. Luo, D. H. He, and B. Sun, “Design of Racetrack Cavity Beam Position Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP058, pp. 4084-4086. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search