Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Zhang, Y. Du, X. Liu, and L. Yan, “Elliptical beam shaping in a standard bow-tie planar four-mirror optical enhancement cavity using a cylindrical lens”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2687, unpublished.
[n] H. Anamkath et al., “10 MeV, 10 kW E-Beam Processing Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-65, pp. 216-218.
[n] U. Schmidhammer et al., “Longitudinal Bunch Profile Monitoring via Single Shot Diagnostic with Linear Response”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC094, pp. 1278-1280.
[n] K. R. Crandall, “Ending RFQ Vanetips with Quadrupole Symmetry”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-69, pp. 227-229.
[n] H. Lutz, D. Anicic, and A. Mezger, “Migration of the Configuration Database for PSI Cyclotron Accelerators”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP578, pp. XX-XX.
[n] L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2781-2783. doi:10.18429/JACoW-IPAC2016-WEPOR050
[n] R. Holtzapple, G. Dugan, and R. Littauer, “Beam Position Monitors for the Cornell Electron Synchrotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA73, pp. 2057-2059.
[n] S. Di Mitri and E. Karantzoulis, “Particle Tracking in a Sextupole Field using the Euler Method Approximation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH077, pp. 2098-2100.
[n] T. Kato, “Design of Beam-Transport Line between the RFQ and the DTL for the JHP 1-GeV Proton Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-07, pp. 59-61.
[n] L. Yang, W. Guo, S. Krinsky, and Y. Li, “Multiobjective Dynamic Aperture Optimization at NSLS-II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP065, pp. 1597-1599.
[n] Y. Shobuda and S. Machida, “Degradation of the Beam passing through Idle Coupled Cavities”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA035, pp. 369-371.
[n] Y. Yamamoto, “Measurement of Bremsstrahlung Dependent on Stored Beam Current”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA012, pp. 115-117.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Zhang, Y. Du, X. Liu, and L. Yan, “Elliptical beam shaping in a standard bow-tie planar four-mirror optical enhancement cavity using a cylindrical lens”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2687, this conference.
- H. Anamkath et al., “10 MeV, 10 kW E-Beam Processing Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-65, pp. 216-218.
- U. Schmidhammer et al., “Longitudinal Bunch Profile Monitoring via Single Shot Diagnostic with Linear Response”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC094, pp. 1278-1280.
- K. R. Crandall, “Ending RFQ Vanetips with Quadrupole Symmetry”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-69, pp. 227-229.
- H. Lutz, D. Anicic, and A. Mezger, “Migration of the Configuration Database for PSI Cyclotron Accelerators”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP578, pp. XX-XX.
- L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2781-2783.
- R. Holtzapple, G. Dugan, and R. Littauer, “Beam Position Monitors for the Cornell Electron Synchrotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA73, pp. 2057-2059.
- S. Di Mitri and E. Karantzoulis, “Particle Tracking in a Sextupole Field using the Euler Method Approximation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH077, pp. 2098-2100.
- T. Kato, “Design of Beam-Transport Line between the RFQ and the DTL for the JHP 1-GeV Proton Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-07, pp. 59-61.
- L. Yang, W. Guo, S. Krinsky, and Y. Li, “Multiobjective Dynamic Aperture Optimization at NSLS-II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP065, pp. 1597-1599.
- Y. Shobuda and S. Machida, “Degradation of the Beam passing through Idle Coupled Cavities”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA035, pp. 369-371.
- Y. Yamamoto, “Measurement of Bremsstrahlung Dependent on Stored Beam Current”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA012, pp. 115-117.
Back to search