Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hayano et al., “Diagnosis of the Low Emittance Beam in ATF DR Extraction Line”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP09H, pp. 466-468.
[n] R. Jobe, J. Clendenin, H. Schwarz, J. Seeman, J. Sheppard, and R. Stiening, “The RF Phase System of the SLC”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-26, pp. 592-594.
[n] K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
[n] B. Salvant et al., “Transverse Mode-Coupling Instability in the CERN SPS: Comparing HEADTAIL Simulations with Beam Measurements”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA02, pp. 45-47.
[n] H. Delsim-Hashemi, K. Floettmann, and S. Bayesteh, “Beam Profile Monitors at REGAE”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF06, pp. 212-215.
[n] Y. Ishizawa and A. Yamashita, “Development of Accelerator Management Systems with GIS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB03, pp. 296-298.
[n] D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
[n] M. Matsuoka et al., “RF Power Coupler for Prototype Cryomodule at JAERI”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ004, pp. XX-XX.
[n] S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1595-1598. doi:10.18429/JACoW-ICALEPCS2017-THPHA092
[n] J. J. Pon et al., “Controls Interface into the Low-Level RF System in the ARIEL e-Linac at TRIUMF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 346-348. doi:10.18429/JACoW-ICALEPCS2015-MOPGF114
[n] J. Klute and C. Montag, “Unbunched Beam Cleaning in HERA-p”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B11, pp. 1534-1536.
[n] J. Zhang and X. L. Liu, “Some Calculations of the Resonator in INR Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2821-2824.
[n] J. S. Kolski, E. Bjorklund, M. J. Hall, M. P. Martinez, and F. E. Shelley, “Experimental Results from a Diagnostic" Pulse for Single-Particle-Like Beam Position Measurements during Accumulation/Production Mode in the Los Alamos Proton Storage Ring"”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA15, pp. 330-332.
[n] A. Bosotti et al., “Full Characterization of the Piezo Blade Tuner for Superconducting RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP120, pp. 838-840.
[n] A. Degiovanni et al., “Diagnostics and Analysis Techniques for High Power X-Band Accelerating Structures”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP029, pp. 490-492.
[n] J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110.
[n] K. V. Fedorov et al., “Application of Thermoelectric Oscillations in a Lithium Niobate Single Crystal for Particle Generation”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 620-623. doi:10.18429/JACoW-IBIC2019-WEPP036
[n] H. Payno and C. Nemoz, “An Interactive Workflow to Manage Tomography Experiments at ESRF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 857-860. doi:10.18429/JACoW-ICALEPCS2017-TUPHA183
[n] G. A. Scharfstein, D. Arbelaez, and J.-Y. Jung, “An Endstation with Cryogenic Coils Contributing to a 0.5 Tesla Field and 30-400k Sample Thermal Control”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 396-397. doi:10.18429/JACoW-MEDSI2016-THBA01
[n] P. Chevtsov, J.-C. Denard, A. Freyberger, and R. Hicks, “Synchrotron Light Interferometer at Jefferson Lab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB068, pp. 2560-2562.
[n] M. Zaera-Sanz, J. Burdalo Gil, I. Romera, R. Schmidt, and M. Zerlauth, “Design, Development and Implementation of a Dependable Interlocking Prototype for the ITER Superconducting Magnet Powering System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC058, pp. 230-233.
[n] S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
[n] L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2781-2783. doi:10.18429/JACoW-IPAC2016-WEPOR050
[n] G. Kourkafas et al., “The Effect of Space Charge Along the Tomography Section at PITZ”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF22, pp. 255-258.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hayano et al., “Diagnosis of the Low Emittance Beam in ATF DR Extraction Line”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP09H, pp. 466-468.
- R. Jobe, J. Clendenin, H. Schwarz, J. Seeman, J. Sheppard, and R. Stiening, “The RF Phase System of the SLC”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-26, pp. 592-594.
- K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
- B. Salvant et al., “Transverse Mode-Coupling Instability in the CERN SPS: Comparing HEADTAIL Simulations with Beam Measurements”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA02, pp. 45-47.
- H. Delsim-Hashemi, K. Floettmann, and S. Bayesteh, “Beam Profile Monitors at REGAE”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF06, pp. 212-215.
- Y. Ishizawa and A. Yamashita, “Development of Accelerator Management Systems with GIS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAB03, pp. 296-298.
- D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
- M. Matsuoka et al., “RF Power Coupler for Prototype Cryomodule at JAERI”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ004, pp. XX-XX.
- S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1595-1598.
- J. J. Pon et al., “Controls Interface into the Low-Level RF System in the ARIEL e-Linac at TRIUMF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 346-348.
- J. Klute and C. Montag, “Unbunched Beam Cleaning in HERA-p”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B11, pp. 1534-1536.
- J. Zhang and X. L. Liu, “Some Calculations of the Resonator in INR Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2821-2824.
- J. S. Kolski, E. Bjorklund, M. J. Hall, M. P. Martinez, and F. E. Shelley, “Experimental Results from a Diagnostic" Pulse for Single-Particle-Like Beam Position Measurements during Accumulation/Production Mode in the Los Alamos Proton Storage Ring"”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA15, pp. 330-332.
- A. Bosotti et al., “Full Characterization of the Piezo Blade Tuner for Superconducting RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP120, pp. 838-840.
- A. Degiovanni et al., “Diagnostics and Analysis Techniques for High Power X-Band Accelerating Structures”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP029, pp. 490-492.
- J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1107-1110.
- K. V. Fedorov et al., “Application of Thermoelectric Oscillations in a Lithium Niobate Single Crystal for Particle Generation”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 620-623.
- H. Payno and C. Nemoz, “An Interactive Workflow to Manage Tomography Experiments at ESRF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 857-860.
- G. A. Scharfstein, D. Arbelaez, and J.-Y. Jung, “An Endstation with Cryogenic Coils Contributing to a 0.5 Tesla Field and 30-400k Sample Thermal Control”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 396-397.
- P. Chevtsov, J.-C. Denard, A. Freyberger, and R. Hicks, “Synchrotron Light Interferometer at Jefferson Lab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB068, pp. 2560-2562.
- M. Zaera-Sanz, J. Burdalo Gil, I. Romera, R. Schmidt, and M. Zerlauth, “Design, Development and Implementation of a Dependable Interlocking Prototype for the ITER Superconducting Magnet Powering System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC058, pp. 230-233.
- S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
- L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2781-2783.
- G. Kourkafas et al., “The Effect of Space Charge Along the Tomography Section at PITZ”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF22, pp. 255-258.
Back to search