Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
[n] J. Guo et al., “Investigation of 26MHz RFQ Accelerators”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D048, pp. 196-198.
[n] F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
[n] D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430.
[n] Y. B. Yan et al., “Status of the SHINE Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1487. doi:10.18429/JACoW-ICALEPCS2019-WEPHA167
[n] T. Hofmann et al., “Status of and Future Plans for the CERN LINAC4 Emittance Meter based on Laser Electron-Detachment and a Diamond Strip-Detector”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF15, pp. 83-87.
[n] I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
[n] J. Fang, B. Wu, and D. Proch, “Measurements of the Surface Resistance of YBCO at 500 MHz”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G23, pp. XX-XX.
[n] J. Gao et al., “IHEP 1.3 GHz SC RF Technology R&D Progress”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO002, pp. 168-170.
[n] J. G. Pett and A. Beuret, “Dynamic Behaviour of the LEP Power Converters”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1440-1443.
[n] A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3959-3961. doi:10.18429/JACoW-IPAC2015-THPF105
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] F. Pollastrone, M. Riva, and G. C. Cardarilli, “Real-Time Liquid Scintillator Calibration Based on Intensity Modulated LED”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 575-579. doi:10.18429/JACoW-ICALEPCS2017-TUPHA072
[n] P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2241-2244. doi:10.18429/JACoW-IPAC2016-WEPMB056
[n] L. Shaw and C. D. Ziomek, “Off-the-shelf EPICS Instrumentation for Remote Waveform Monitoring & Analysis”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE082, pp. 1173-1175.
[n] F. Brinker, “Commissioning of the European XFEL Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1044-1047. doi:10.18429/JACoW-IPAC2016-TUOCA03
[n] P. Bosland et al., “Status of the Cryomodules for the SPIRAL 2 Superconducting LINAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI04, pp. 2578-2580.
[n] J. J. Petillo and A. Mondelli, “LEBT Modeling with ARGUS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 315-318.
[n] V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
[n] D. P. Perl, N. Frisina, D. E. Oram, and N. P. Paterson, “Ultra-High Throughput Automated Macromolecular Crystallography Data Collection Using the Bluesky Framework”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1280-1284. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO34
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 114-116. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO14
[n] J. Musson, C. Seaton, M. Spata, and J. Yan, “Application of Neural Network Algorithms for BPM Linearization”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG020, pp. 71-73.
[n] J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1344-1347. doi:10.18429/JACoW-ICALEPCS2017-THPHA003
[n] I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175.
[n] W. Fu, T. D, and S. Nemesure, “A Generic REST API Service for Control Databases”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 465-468. doi:10.18429/JACoW-ICALEPCS2017-TUPHA038
[n] C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
[n] L. M. Onischenko et al., “Compact Cyclotron as a Proton Source for the Detection of Explosives Based on Nuclear Resonance Absorption in Nitrogen”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC020, pp. 363-365.
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] K. Buakor et al., “Development of Linac-Based MIR/THz FEL Facility and Photocathode RF-gun in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2763-2766. doi:10.18429/JACoW-IPAC2017-WEPAB083
[n] O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 540-542. doi:10.18429/JACoW-IPAC2018-MOPML059
[n] E. S. Fischer et al., “First Tests of the Main Quadrupole and Corrector Magnets for the SIS100 Synchrotron of FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2751-2754. doi:10.18429/JACoW-IPAC2018-WEPML030
[n] Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
[n] D. L. Bruhwiler et al., “Knowledge Exchange Within the Particle Accelerator Community via Cloud Computing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3548-3551. doi:10.18429/JACoW-IPAC2019-THPMP046
[n] J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
[n] Q. Luo, J. Fang, D. H. He, and B. Sun, “Cold Test of S-band Re-entrant Cavity BPM for HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE029, pp. 1032-1034.
[n] A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
[n] P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
[n] C. Bontoiu, I. Martel, J. Sanchez-Segovia, R. Berjillos, and J. P. B. Perez, “Design of a Superconducting Gantry Cryostat”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3043-3045. doi:10.18429/JACoW-IPAC2015-WEPMN051
[n] F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
[n] A. S. Parfenova, G. Franchetti, and I. Hofmann, “Measuring Ring Nonlinear Components via Induced Linear Feed-down""”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC066, pp. 3137-3139.
[n] M. Mu??oz, G. Benedetti, D. Einfeld, and Z. Mart?¡, “Predicted Effect of the Measured High Order Magnetic Multipole in the ALBA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE077, pp. 4698-4700.
For LaTeX
Use Complete Form
For BibTeX
References
- T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
- J. Guo et al., “Investigation of 26MHz RFQ Accelerators”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D048, pp. 196-198.
- F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
- D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430.
- Y. B. Yan et al., “Status of the SHINE Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1487.
- T. Hofmann et al., “Status of and Future Plans for the CERN LINAC4 Emittance Meter based on Laser Electron-Detachment and a Diamond Strip-Detector”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF15, pp. 83-87.
- I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
- J. Fang, B. Wu, and D. Proch, “Measurements of the Surface Resistance of YBCO at 500 MHz”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G23, pp. XX-XX.
- J. Gao et al., “IHEP 1.3 GHz SC RF Technology R&D Progress”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO002, pp. 168-170.
- J. G. Pett and A. Beuret, “Dynamic Behaviour of the LEP Power Converters”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1440-1443.
- A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3959-3961.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- F. Pollastrone, M. Riva, and G. C. Cardarilli, “Real-Time Liquid Scintillator Calibration Based on Intensity Modulated LED”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 575-579.
- P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2241-2244.
- L. Shaw and C. D. Ziomek, “Off-the-shelf EPICS Instrumentation for Remote Waveform Monitoring & Analysis”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE082, pp. 1173-1175.
- F. Brinker, “Commissioning of the European XFEL Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1044-1047.
- P. Bosland et al., “Status of the Cryomodules for the SPIRAL 2 Superconducting LINAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAKI04, pp. 2578-2580.
- J. J. Petillo and A. Mondelli, “LEBT Modeling with ARGUS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 315-318.
- V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
- D. P. Perl, N. Frisina, D. E. Oram, and N. P. Paterson, “Ultra-High Throughput Automated Macromolecular Crystallography Data Collection Using the Bluesky Framework”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO34, pp. 1280-1284.
- M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 114-116.
- J. Musson, C. Seaton, M. Spata, and J. Yan, “Application of Neural Network Algorithms for BPM Linearization”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG020, pp. 71-73.
- J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
- M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1344-1347.
- I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175.
- W. Fu, T. D, and S. Nemesure, “A Generic REST API Service for Control Databases”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 465-468.
- C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
- L. M. Onischenko et al., “Compact Cyclotron as a Proton Source for the Detection of Explosives Based on Nuclear Resonance Absorption in Nitrogen”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC020, pp. 363-365.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- K. Buakor et al., “Development of Linac-Based MIR/THz FEL Facility and Photocathode RF-gun in Thailand”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2763-2766.
- O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 540-542.
- E. S. Fischer et al., “First Tests of the Main Quadrupole and Corrector Magnets for the SIS100 Synchrotron of FAIR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2751-2754.
- Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
- D. L. Bruhwiler et al., “Knowledge Exchange Within the Particle Accelerator Community via Cloud Computing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3548-3551.
- J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
- Q. Luo, J. Fang, D. H. He, and B. Sun, “Cold Test of S-band Re-entrant Cavity BPM for HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE029, pp. 1032-1034.
- A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
- P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
- C. Bontoiu, I. Martel, J. Sanchez-Segovia, R. Berjillos, and J. P. B. Perez, “Design of a Superconducting Gantry Cryostat”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3043-3045.
- F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
- A. S. Parfenova, G. Franchetti, and I. Hofmann, “Measuring Ring Nonlinear Components via Induced Linear Feed-down""”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC066, pp. 3137-3139.
- M. Mu??oz, G. Benedetti, D. Einfeld, and Z. Mart?¡, “Predicted Effect of the Measured High Order Magnetic Multipole in the ALBA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE077, pp. 4698-4700.
Back to search