Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Otani et al., “Muon Profile Measurement After Acceleration With a Radio-Frequency Quadrupole Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 977-980. doi:10.18429/JACoW-IPAC2018-TUPAK009
[n] J. D. Herbert, R. J. Reid, and T. M. Weston, “Preliminary Design of the Vacuum System for DIAMOND”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP041L, pp. 2506-2508.
[n] T. Nishidano et al., “Performance Estimation of Vacuum System Components Including Crotch and Absorber”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2298-2301.
[n] H. Padamsee, “SRF for Neutrino Factories”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TA007, pp. XX-XX.
[n] A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
[n] M. Farkhondeh, C. Sibley, R. Averill, S. Sobczynski, and W. Sapp, “Electrostatic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1372-1375.
[n] C. E. Reece, “Exploration and Comparison of Hydrodynamic and Thermal Properties of Horizontal and Vertical Electropolishing Configurations with Various Boundary Conditions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO061, pp. 742-745.
[n] T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
[n] G. Azzopardi, A. Mereghetti, S. Redaelli, B. Salvachua, G. Valentino, and A. Muscat, “Automatic Angular Alignment of LHC Collimators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 928-933. doi:10.18429/JACoW-ICALEPCS2017-TUPHA204
[n] P. He, “Accelerator Vacuum Technology Challenges for Next-Generation Synchrotron-Light Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4830-4835. doi:10.18429/JACoW-IPAC2017-FRXAB1
[n] K. Akai, E. Ezura, and Y. Yamazaki, “Design of the KEKB RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ08, pp. 1735-1737.
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 818-821. doi:10.18429/JACoW-IBIC2016-WEPG73
[n] E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666.
[n] H. Danared, A. K?ñllberg, and A. Simonsson, “Studies of Cooling and Deceleration at CRYRING for FLAIR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper FRM2C04, pp. 234-237.
[n] Y. Takeuchi et al., “HOM Absorber for the KEKB Normal Conducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR05, pp. 1797-1799.
[n] J. Kirchgessner, D. Moffat, H. Padamsee, D. Rubin, J. Sears, and Q. S. Shu, “Superconducting RF Activities at Cornell University”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A03, pp. XX-XX.
[n] F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989.
[n] J. Fujita, M. G. Cherney, D. Arkhipkin, and J. Lauret, “Development of MQTT-Channel Access Bridge”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1916-1918. doi:10.18429/JACoW-ICALEPCS2017-THPHA198
[n] K. Anderson and Y. Hao, “Koopman operator method for nonlinear dynamics analysis using symplectic neural networks”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 713-716. doi:10.18429/JACoW-IPAC2024-MOPS10
[n] G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
[n] K. Bilko, M. Brugger, R. Garcia Alia, F. J. Harden, Y. Kadi, and O. Stein, “Detailed Analysis Of The Baseline Dose Levels And Localized Radiation Spikes In The Arc Sections Of The Large Hadron Collider During Run 2”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4009-4012. doi:10.18429/JACoW-IPAC2019-THPRB083
[n] A. K?ñllberg et al., “Instrumentation in DESIREE”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 131-133. doi:10.18429/JACoW-IBIC2015-MOPB040
[n] H. Padamsee et al., “Cornell Status Report”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL005, pp. XX-XX.
[n] C. E. Reece, J. K. Spradlin, O. Trofimova, and A-M. Valente-Feliciano, “Identifying Specific Cryomodule and Cleanroom Particulate Contamination: Understanding Legacy Issues and Providing New Feedback Standards”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 758-762. doi:10.18429/JACoW-SRF2019-WETEB2
[n] J. Seeman, “Beam Dynamics Verification in Linacs of Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH1-03, pp. 487-493.
[n] A. Bocci et al., “Fast IR Array Detector for Transverse Beam Diagnostics at DANE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD098, pp. 936-938.
[n] Y. Ma, D. Z. Guo, P. He, B. Liu, and Y. C. Yang, “Preparation and Characterization of Non-Evaporable Ti-Zr-V Getter Films for HEPS”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 125-127. doi:10.18429/JACoW-FLS2018-WEP2PT023
[n] S. Belomestnykh and H. Padamsee, “Performance of the CESR Superconducting RF System and Future Plans”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA003, pp. XX-XX.
[n] M. Hara, K. Mitomori, T. Wada, and F. Kikuchi, “Three Dimensional Analysis of RF Electromagnetic Field by the Finite Element Method”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-03, pp. 337-340.
[n] F.-J. Decker, M. H. Donald, R. H. Iverson, A. Kulikov, G. C. Pappas, and M. Weaver, “Diagnosing the PEP-II Injection System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT127, pp. 833-835.
[n] D. Trines, “TESLA Project Overview”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA003, pp. 605-609.
[n] T. Tydecks, D. Alves, T. E. Levens, M. Wendt, and J. Wenninger, “Status of the LHC Schottky Monitors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 247-249. doi:10.18429/JACoW-IPAC2018-MOPMF058
[n] M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
[n] J. M. Weber and M. J. Chin, “Continuous Bunch-by-Bunch 16-bit Data Acquisition using DDR2 SDRAM Connected to an FPGA”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM112, pp. 483-486.
[n] A. H. Botha, “Invited Paper: The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-05, pp. 1896-1903.
[n] A. A. Rossi et al., “Purification of 6 GHz Cavities by Induction Heating”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOC05, pp. 419-423.
[n] E. F. Valderrama et al., “Nb Film Growth on Crystalline and Amorphous Substrates”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO069, pp. 898-904.
[n] F. Van der Veken et al., “Collimation performance of the 400MJ LHC beam at 6.8 TeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2499-2502. doi:10.18429/JACoW-IPAC2023-TUPM119
For LaTeX
Use Complete Form
For BibTeX
References
- M. Otani et al., “Muon Profile Measurement After Acceleration With a Radio-Frequency Quadrupole Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 977-980.
- J. D. Herbert, R. J. Reid, and T. M. Weston, “Preliminary Design of the Vacuum System for DIAMOND”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP041L, pp. 2506-2508.
- T. Nishidano et al., “Performance Estimation of Vacuum System Components Including Crotch and Absorber”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2298-2301.
- H. Padamsee, “SRF for Neutrino Factories”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TA007, pp. XX-XX.
- A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
- M. Farkhondeh, C. Sibley, R. Averill, S. Sobczynski, and W. Sapp, “Electrostatic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1372-1375.
- C. E. Reece, “Exploration and Comparison of Hydrodynamic and Thermal Properties of Horizontal and Vertical Electropolishing Configurations with Various Boundary Conditions”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO061, pp. 742-745.
- T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
- G. Azzopardi, A. Mereghetti, S. Redaelli, B. Salvachua, G. Valentino, and A. Muscat, “Automatic Angular Alignment of LHC Collimators”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 928-933.
- P. He, “Accelerator Vacuum Technology Challenges for Next-Generation Synchrotron-Light Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4830-4835.
- K. Akai, E. Ezura, and Y. Yamazaki, “Design of the KEKB RF System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ08, pp. 1735-1737.
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 818-821.
- E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666.
- H. Danared, A. K?ñllberg, and A. Simonsson, “Studies of Cooling and Deceleration at CRYRING for FLAIR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper FRM2C04, pp. 234-237.
- Y. Takeuchi et al., “HOM Absorber for the KEKB Normal Conducting Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR05, pp. 1797-1799.
- J. Kirchgessner, D. Moffat, H. Padamsee, D. Rubin, J. Sears, and Q. S. Shu, “Superconducting RF Activities at Cornell University”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89A03, pp. XX-XX.
- F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989.
- J. Fujita, M. G. Cherney, D. Arkhipkin, and J. Lauret, “Development of MQTT-Channel Access Bridge”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1916-1918.
- K. Anderson and Y. Hao, “Koopman operator method for nonlinear dynamics analysis using symplectic neural networks”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS10, pp. 713-716.
- G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
- K. Bilko, M. Brugger, R. Garcia Alia, F. J. Harden, Y. Kadi, and O. Stein, “Detailed Analysis Of The Baseline Dose Levels And Localized Radiation Spikes In The Arc Sections Of The Large Hadron Collider During Run 2”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4009-4012.
- A. K?ñllberg et al., “Instrumentation in DESIREE”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 131-133.
- H. Padamsee et al., “Cornell Status Report”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL005, pp. XX-XX.
- C. E. Reece, J. K. Spradlin, O. Trofimova, and A-M. Valente-Feliciano, “Identifying Specific Cryomodule and Cleanroom Particulate Contamination: Understanding Legacy Issues and Providing New Feedback Standards”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 758-762.
- J. Seeman, “Beam Dynamics Verification in Linacs of Linear Colliders”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH1-03, pp. 487-493.
- A. Bocci et al., “Fast IR Array Detector for Transverse Beam Diagnostics at DANE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD098, pp. 936-938.
- Y. Ma, D. Z. Guo, P. He, B. Liu, and Y. C. Yang, “Preparation and Characterization of Non-Evaporable Ti-Zr-V Getter Films for HEPS”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 125-127.
- S. Belomestnykh and H. Padamsee, “Performance of the CESR Superconducting RF System and Future Plans”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper SA003, pp. XX-XX.
- M. Hara, K. Mitomori, T. Wada, and F. Kikuchi, “Three Dimensional Analysis of RF Electromagnetic Field by the Finite Element Method”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-03, pp. 337-340.
- F.-J. Decker, M. H. Donald, R. H. Iverson, A. Kulikov, G. C. Pappas, and M. Weaver, “Diagnosing the PEP-II Injection System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT127, pp. 833-835.
- D. Trines, “TESLA Project Overview”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper FRA003, pp. 605-609.
- T. Tydecks, D. Alves, T. E. Levens, M. Wendt, and J. Wenninger, “Status of the LHC Schottky Monitors”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 247-249.
- M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
- J. M. Weber and M. J. Chin, “Continuous Bunch-by-Bunch 16-bit Data Acquisition using DDR2 SDRAM Connected to an FPGA”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM112, pp. 483-486.
- A. H. Botha, “Invited Paper: The Status of the South African National Accelerator Centre”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-05, pp. 1896-1903.
- A. A. Rossi et al., “Purification of 6 GHz Cavities by Induction Heating”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUIOC05, pp. 419-423.
- E. F. Valderrama et al., “Nb Film Growth on Crystalline and Amorphous Substrates”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO069, pp. 898-904.
- F. Van der Veken et al., “Collimation performance of the 400MJ LHC beam at 6.8 TeV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM119, pp. 2499-2502.
Back to search