Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] T. G. Beukers, J. W. Krzaszczak, M. H. Larrus, and A. C. de Lira, “Resonant Kicker System Development at SLAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP089, pp. 1754-1756.
[n] S. Chattopadhyay et al., “Design of a Superconducting Linear Accelerator for an Infrared Free Electron Laser of the Proposed Chemical Dynamics Research Laboratory at LBL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-38, pp. 404-406.
[n] J. Hogan et al., “Overview and Lessons Learned of the Jefferson Lab Cryomodule Production for the CEBAF 12 GeV Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZAA2, pp. 749-753.
[n] D. Bisiach et al., “Filling Pattern Measurement Using a 500 MHz Digitizer at Soleil and APS Storage Rings”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 96-98. doi:10.18429/JACoW-IBIC2020-WEPP01
[n] G. Machicoane, J. W. Stetson, P. A. Zavodszky, M. Steiner, and P. Miller, “Experimental Studies of Electrostatic and Solenoidal Focusing of Low-Energy, Heavy-Ion ECRIS Beams at the NSCL/MSU”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP046, pp. 352-354.
[n] Y. Shimosaki et al., “New Optics with Emittance Reduction at the SPring-8 Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA027, pp. 133-135.
[n] D. Gonnella et al., “Nitrogen-Doped 9-Cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP018, pp. 88-91.
[n] V. I. R. Niculescu, G. R. Anda, V. Babin, F. Scarlat, C. Stancu, and A. Tudorache, “Current Heart-like Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF050, pp. 423-424.
[n] F. Jackson, J.-L. Fernandez-Hernando, D. Angal-Kalinin, H.-H. Braun, and S. Reiche, “Collimation System Design and Performance for the SwissFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP067, pp. 1753-1755.
[n] Y. Ogawa, A. Enomoto, and I. Sato, “Improvement of the Alignment System for the KEK 2.5-GeV Electron Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA04, pp. 2087-2089.
[n] C.-S. Hwang, “Planning of Insertion Devices for 3 GeV Taiwan Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN071, pp. 1082-1084.
[n] N. Vallis et al., “A positron source demonstrator for future colliders”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1518-1521. doi:10.18429/JACoW-IPAC2023-TUPA086
[n] T. A. Wallace, “The Matter in Extreme Conditions Upgrade Facility Control System Architecture”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper TUPDP128, unpublished.
[n] A. Y. Molodojentsev et al., “Dynamic Aperture and Resonance Correction for JPARC-RCS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE005, pp. 979-981.
[n] G. Batskikh, G. Mamaev, A. Mischenko, and V. Pirozhenko, “The Electron Accelerator Installations with Local Shielding for Applied Purposes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP139, pp. 2564-2566.
[n] I. V. Bazarov and A. D. Gasbarro, “Computation of the Wigner Distribution for Undulator Radiation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBB03, pp. 2149-2151.
[n] S. Giordano and M. Puglisi, “A Cathode Follower Power Amplifier”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3408-3411.
[n] A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
[n] , “Short Wavelength FELs using the SLAC Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 855-858.
[n] A. K. Krasnykh, A. L. Benwell, T. G. Beukers, and D. F. Ratner, “R&D at SLAC on Nanosecond-Range Multi-MW Systems for Advanced FEL Facilities”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 404-406. doi:10.18429/JACoW-FEL2017-WEB03
[n] D. Martin et al., “Finalized Design of the SSC RFQ-DTL Matching Section”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1703-1706.
[n] K. Fong et al., “Self Excited Operation for a 1.3 GHz 5-cell Superconducting Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP290, pp. 660-662.
[n] O. Mete, G. X. Xia, G. Burt, and S. Chattopadhyay, “Preliminary Study for an RF Photocathode based Electron Injector for AWAKE Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 717-719. doi:10.18429/JACoW-IPAC2014-MOPRI050
[n] L. Bottura, S. D. Fartoukh, V. Granata, and E. Todesco, “A Strategy for Sampling of the Field Quality of the LHC Dipoles”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF008, pp. 1606-1608.
[n] I. Degl, A. Boccardi, L. Fanucci, and M. Wendt, “Direct Digitization and ADC Parameter Trade-off for Bunch-by-Bunch Signal Processing”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 288-294. doi:10.18429/JACoW-IBIC2020-FRAO02
[n] R. Tikhoplav and I. Jovanovic, “Progress Report on Development of the RING Cavity for Laser-based Charge Stripping of Hydrogen Ions”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP288, pp. 657-659.
[n] V. Pugatch et al., “Superthin Internal Target for Storage Rings”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-07, pp. 297-300.
[n] M. J. Shirakata et al., “The Magnet Alignment Method For The J-PARC Main Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA083, pp. 752-754.
[n] A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
[n] S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2326-2329. doi:10.18429/JACoW-IPAC2018-WEPAL065
[n] C. Pagani, G. Varisco, G. Marinone, and M. Puglisi, “Results of a New Passive RF Stabilizing System”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-05, pp. 160-162.
[n] T. Hayes, F. Severino, and K. S. Smith, “A Deterministic, Gigabit Serial Timing, Synchronization and Data Link for the RHIC LLRF”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP282, pp. 642-644.
For LaTeX
Use Complete Form
For BibTeX
References
- T. G. Beukers, J. W. Krzaszczak, M. H. Larrus, and A. C. de Lira, “Resonant Kicker System Development at SLAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP089, pp. 1754-1756.
- S. Chattopadhyay et al., “Design of a Superconducting Linear Accelerator for an Infrared Free Electron Laser of the Proposed Chemical Dynamics Research Laboratory at LBL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-38, pp. 404-406.
- J. Hogan et al., “Overview and Lessons Learned of the Jefferson Lab Cryomodule Production for the CEBAF 12 GeV Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZAA2, pp. 749-753.
- D. Bisiach et al., “Filling Pattern Measurement Using a 500 MHz Digitizer at Soleil and APS Storage Rings”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 96-98.
- G. Machicoane, J. W. Stetson, P. A. Zavodszky, M. Steiner, and P. Miller, “Experimental Studies of Electrostatic and Solenoidal Focusing of Low-Energy, Heavy-Ion ECRIS Beams at the NSCL/MSU”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP046, pp. 352-354.
- Y. Shimosaki et al., “New Optics with Emittance Reduction at the SPring-8 Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA027, pp. 133-135.
- D. Gonnella et al., “Nitrogen-Doped 9-Cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP018, pp. 88-91.
- V. I. R. Niculescu, G. R. Anda, V. Babin, F. Scarlat, C. Stancu, and A. Tudorache, “Current Heart-like Wiggler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF050, pp. 423-424.
- F. Jackson, J.-L. Fernandez-Hernando, D. Angal-Kalinin, H.-H. Braun, and S. Reiche, “Collimation System Design and Performance for the SwissFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP067, pp. 1753-1755.
- Y. Ogawa, A. Enomoto, and I. Sato, “Improvement of the Alignment System for the KEK 2.5-GeV Electron Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA04, pp. 2087-2089.
- C.-S. Hwang, “Planning of Insertion Devices for 3 GeV Taiwan Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN071, pp. 1082-1084.
- N. Vallis et al., “A positron source demonstrator for future colliders”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA086, pp. 1518-1521.
- T. A. Wallace, “The Matter in Extreme Conditions Upgrade Facility Control System Architecture”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP128, unpublished.
- A. Y. Molodojentsev et al., “Dynamic Aperture and Resonance Correction for JPARC-RCS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE005, pp. 979-981.
- G. Batskikh, G. Mamaev, A. Mischenko, and V. Pirozhenko, “The Electron Accelerator Installations with Local Shielding for Applied Purposes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP139, pp. 2564-2566.
- I. V. Bazarov and A. D. Gasbarro, “Computation of the Wigner Distribution for Undulator Radiation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBB03, pp. 2149-2151.
- S. Giordano and M. Puglisi, “A Cathode Follower Power Amplifier”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3408-3411.
- A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
- , “Short Wavelength FELs using the SLAC Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 855-858.
- A. K. Krasnykh, A. L. Benwell, T. G. Beukers, and D. F. Ratner, “R&D at SLAC on Nanosecond-Range Multi-MW Systems for Advanced FEL Facilities”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 404-406.
- D. Martin et al., “Finalized Design of the SSC RFQ-DTL Matching Section”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1703-1706.
- K. Fong et al., “Self Excited Operation for a 1.3 GHz 5-cell Superconducting Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP290, pp. 660-662.
- O. Mete, G. X. Xia, G. Burt, and S. Chattopadhyay, “Preliminary Study for an RF Photocathode based Electron Injector for AWAKE Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 717-719.
- L. Bottura, S. D. Fartoukh, V. Granata, and E. Todesco, “A Strategy for Sampling of the Field Quality of the LHC Dipoles”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF008, pp. 1606-1608.
- I. Degl, A. Boccardi, L. Fanucci, and M. Wendt, “Direct Digitization and ADC Parameter Trade-off for Bunch-by-Bunch Signal Processing”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 288-294.
- R. Tikhoplav and I. Jovanovic, “Progress Report on Development of the RING Cavity for Laser-based Charge Stripping of Hydrogen Ions”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP288, pp. 657-659.
- V. Pugatch et al., “Superthin Internal Target for Storage Rings”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-07, pp. 297-300.
- M. J. Shirakata et al., “The Magnet Alignment Method For The J-PARC Main Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA083, pp. 752-754.
- A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
- S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2326-2329.
- C. Pagani, G. Varisco, G. Marinone, and M. Puglisi, “Results of a New Passive RF Stabilizing System”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-05, pp. 160-162.
- T. Hayes, F. Severino, and K. S. Smith, “A Deterministic, Gigabit Serial Timing, Synchronization and Data Link for the RHIC LLRF”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP282, pp. 642-644.
Back to search