Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. L. Thune, N. Fleming, C. McKinney, E. M. Nicometo, T. R. Bieler, and S. Balachandran, “Ex-Situ Investigation of the Effects of Heating Rate on the Recrystallization in Rolled Polycrystals of High-Purity Niobium”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 1. doi:10.18429/JACoW-SRF2021-SUPCAV002
[n] P. Schreiber et al., “Effect of Negative Momentum Compaction Operation on the Current-Dependent Bunch Length”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2786-2789. doi:10.18429/JACoW-IPAC2021-WEPAB083
[n] I. Sugai et al., “Lifetime Comparisons of Single and Double Layered HBC-Foils using 3.2MeV Ne+ Ion Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP107, pp. 3617-3619.
[n] S. Kunjir, D. Morris, E. Bernal, K. Minamisono, and S. Zhao, “SoC based time-resolved scaler DAQ and amplifier-discriminator upgrade for laser spectroscopy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1115-1117. doi:10.18429/JACoW-IPAC2024-TUPC47
[n] T. L. Larter et al., “Design and Implementation of a Production Model Bias Tee”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2339-2341. doi:10.18429/JACoW-IPAC2021-TUPAB355
[n] Z. Li, J. Hartford, E. Bernal, and M. Ikegami, “FPGA design of FRIB chopper monitor system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3413-3416. doi:10.18429/JACoW-IPAC2024-THPG63
[n] K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
[n] O. Kamigaito, K. Ozeki, N. Sakamoto, K. Suda, and K. Yamada, “Measurement of Mechanical Vibration of SRILAC Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 513-517. doi:10.18429/JACoW-SRF2019-TUP042
[n] A. Medvids et al., “Improvement of Mechanical and Magnetic Properties of Nb/cu Structure by Laser Radiation for SRF Applications”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV003, pp..
[n] P. V. Logatchev et al., “Measurement of Time Response of Laser-Triggered GaAs Photocathode”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1480-1483.
[n] S. Chetri, P. Dhakal, S. Balachandran, L. D. Cooley, and P. J. Lee, “Coupon Sample Characterization of SRF Grade High Purity Nb Treated with High-Q Recipes”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV019, pp..
[n] M. Portillo, V. N. Aseev, J. A. Nolen, Jr., and P. N. Ostroumov, “Design of a Magnetic Optical System for Transport and Matching of Multiple-Charge-State Heavy-Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH072, pp. 3012-3014.
[n] L. R. Dalesio, “The Ground Test Accelerator Control System Database: Configuration, Run-Time Operation and Access”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1693-1695.
[n] T. Boltz et al., “Excitation of Micro-Bunching in Short Electron Bunches Using RF Amplitude Modulation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3173-3176. doi:10.18429/JACoW-IPAC2021-WEPAB233
[n] S. Balachandran, S. Chetri, P. J. Lee, A. Polyanskii, and P. Dhakal, “Impact of Deformation, Heat Treatment, and Processing Metallurgy for SRF Nb Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFDV009, pp..
[n] R.Krempaska,A.Bertrand,M.Dach,D.Vermeulen,D.Zimoch, “SLS Control System Software Management”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_085.
[n] J. Yang, P. Boutachkov, P. Forck, T. Milosic, R. Singh, and S. Sorge, “Beam Characterization of Slow Extraction Measurement at GSI-SIS18 for Transverse Emittance Exchange Experiments”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 318-322. doi:10.18429/JACoW-IBIC2022-TUP36
[n] M. Wang et al., “Study of Effect of Microscopic Defects on Superconducting Properties of High Purity SRF Cavity Nb Using Magneto-Optical Imaging and Electron Channeling Contrast Imaging”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPCAV015, pp..
[n] Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
[n] Y. W. Kang and X. Jiang, “Coaxial Higher-Order Mode Damper Employing a High-Pass Filter”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P025, pp. 2932-2934.
[n] J. Gethmann et al., “Progress of the Development of a Superconducting Undulator as a THz Source for FELs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2933-2935. doi:10.18429/JACoW-IPAC2021-WEPAB135
[n] G.-T. Park, H. J. Cha, Y. Jung, H. Kim, and W. K. Kim, “The Fabrication of the =0.12 HWR at RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP088, pp. 628-630.
[n] K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
[n] G. Bellomo, E. M. Fabrici, and F. Resmini, “Injection Studies for the K=800 Superconducting Cyclotron at M.S.U.”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-11, pp. 2090-2094.
[n] S. B. Leith et al., “The Development of HiPIMS Multilayer SIS Film Coatings on Copper for SRF Applications”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 86. doi:10.18429/JACoW-SRF2021-SUPFDV012
[n] E. S. Metzgar et al., “Summary of FRIB Cavity Processing in the SRF Coldmass Processing Facility and Lessons Learned”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 680-683. doi:10.18429/JACoW-SRF2019-TUP093
[n] C. Koschitzki et al., “Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 437-439. doi:10.18429/JACoW-FEL2019-WEP050
[n] K. Elliott et al., “Experiences of Superconducting Radio Frequency Coldmass Production for the FRIB Linear Accelerator”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 675-679. doi:10.18429/JACoW-SRF2019-TUP092
[n] M. Aiba, M. B?Âge, D. Castronovo, S. Di Mitri, L. Froehlich, and G. Gaio, “Corrector Response Based Alignment at FERMI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO01, pp. 205-208.
[n] T. Kanemura et al., “R&D of Liquid Lithium Stripper at FRIB”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 668-672. doi:10.18429/JACoW-LINAC2022-TH1AA05
[n] A. V. Kudashkin, “Power Supply and Protection System of the Nuclotron Booster in the NICA Project”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA019, pp. 83-85.
[n] R. W. M??ller and O. B?Âttger, “Acceleration of Very Heavy Ions By Means of a Two-cyclotron Facility”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E02, pp. XX-XX.
[n] G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
[n] L. Neri et al., “HSMDIS Performance on the ESS Ion Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 863-865. doi:10.18429/JACoW-LINAC2022-THPORI19
[n] H. W. Schreuder and R. J. Vader, “New Methods for Stabilizing Dee Voltage and Beam RF Phase”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-21, pp. 2205-2208.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. L. Thune, N. Fleming, C. McKinney, E. M. Nicometo, T. R. Bieler, and S. Balachandran, “Ex-Situ Investigation of the Effects of Heating Rate on the Recrystallization in Rolled Polycrystals of High-Purity Niobium”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 1.
- P. Schreiber et al., “Effect of Negative Momentum Compaction Operation on the Current-Dependent Bunch Length”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2786-2789.
- I. Sugai et al., “Lifetime Comparisons of Single and Double Layered HBC-Foils using 3.2MeV Ne+ Ion Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP107, pp. 3617-3619.
- S. Kunjir, D. Morris, E. Bernal, K. Minamisono, and S. Zhao, “SoC based time-resolved scaler DAQ and amplifier-discriminator upgrade for laser spectroscopy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC47, pp. 1115-1117.
- T. L. Larter et al., “Design and Implementation of a Production Model Bias Tee”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2339-2341.
- Z. Li, J. Hartford, E. Bernal, and M. Ikegami, “FPGA design of FRIB chopper monitor system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG63, pp. 3413-3416.
- K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
- O. Kamigaito, K. Ozeki, N. Sakamoto, K. Suda, and K. Yamada, “Measurement of Mechanical Vibration of SRILAC Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 513-517.
- A. Medvids et al., “Improvement of Mechanical and Magnetic Properties of Nb/cu Structure by Laser Radiation for SRF Applications”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV003, pp..
- P. V. Logatchev et al., “Measurement of Time Response of Laser-Triggered GaAs Photocathode”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1480-1483.
- S. Chetri, P. Dhakal, S. Balachandran, L. D. Cooley, and P. J. Lee, “Coupon Sample Characterization of SRF Grade High Purity Nb Treated with High-Q Recipes”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV019, pp..
- M. Portillo, V. N. Aseev, J. A. Nolen, Jr., and P. N. Ostroumov, “Design of a Magnetic Optical System for Transport and Matching of Multiple-Charge-State Heavy-Ion Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH072, pp. 3012-3014.
- L. R. Dalesio, “The Ground Test Accelerator Control System Database: Configuration, Run-Time Operation and Access”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1693-1695.
- T. Boltz et al., “Excitation of Micro-Bunching in Short Electron Bunches Using RF Amplitude Modulation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3173-3176.
- S. Balachandran, S. Chetri, P. J. Lee, A. Polyanskii, and P. Dhakal, “Impact of Deformation, Heat Treatment, and Processing Metallurgy for SRF Nb Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFDV009, pp..
- R.Krempaska,A.Bertrand,M.Dach,D.Vermeulen,D.Zimoch, “SLS Control System Software Management”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_085.
- J. Yang, P. Boutachkov, P. Forck, T. Milosic, R. Singh, and S. Sorge, “Beam Characterization of Slow Extraction Measurement at GSI-SIS18 for Transverse Emittance Exchange Experiments”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 318-322.
- M. Wang et al., “Study of Effect of Microscopic Defects on Superconducting Properties of High Purity SRF Cavity Nb Using Magneto-Optical Imaging and Electron Channeling Contrast Imaging”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPCAV015, pp..
- Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
- Y. W. Kang and X. Jiang, “Coaxial Higher-Order Mode Damper Employing a High-Pass Filter”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P025, pp. 2932-2934.
- J. Gethmann et al., “Progress of the Development of a Superconducting Undulator as a THz Source for FELs”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2933-2935.
- G.-T. Park, H. J. Cha, Y. Jung, H. Kim, and W. K. Kim, “The Fabrication of the =0.12 HWR at RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP088, pp. 628-630.
- K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
- G. Bellomo, E. M. Fabrici, and F. Resmini, “Injection Studies for the K=800 Superconducting Cyclotron at M.S.U.”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-11, pp. 2090-2094.
- S. B. Leith et al., “The Development of HiPIMS Multilayer SIS Film Coatings on Copper for SRF Applications”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 86.
- E. S. Metzgar et al., “Summary of FRIB Cavity Processing in the SRF Coldmass Processing Facility and Lessons Learned”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 680-683.
- C. Koschitzki et al., “Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 437-439.
- K. Elliott et al., “Experiences of Superconducting Radio Frequency Coldmass Production for the FRIB Linear Accelerator”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 675-679.
- M. Aiba, M. B?Âge, D. Castronovo, S. Di Mitri, L. Froehlich, and G. Gaio, “Corrector Response Based Alignment at FERMI”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO01, pp. 205-208.
- T. Kanemura et al., “R&D of Liquid Lithium Stripper at FRIB”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 668-672.
- A. V. Kudashkin, “Power Supply and Protection System of the Nuclotron Booster in the NICA Project”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA019, pp. 83-85.
- R. W. M??ller and O. B?Âttger, “Acceleration of Very Heavy Ions By Means of a Two-cyclotron Facility”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E02, pp. XX-XX.
- G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
- L. Neri et al., “HSMDIS Performance on the ESS Ion Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 863-865.
- H. W. Schreuder and R. J. Vader, “New Methods for Stabilizing Dee Voltage and Beam RF Phase”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-21, pp. 2205-2208.
Back to search