JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960. 
[n]	T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344. 
[n]	B. Higuera Gonzalez, T. Overton, T. Pacey, Y. Saveliev, and G. Xia, “Simulations study of transverse wakefields in a dielectric wakefield acceleration scheme”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS055, unpublished. 
[n]	S. Myers, “Overlap Knock-Out Resonances with Colliding Bunched Beams in the CERN ISR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3574-3577. 
[n]	S. Rastigeev et al., “First Radiocarbon Measurements at BINP AMS”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHZ01, pp. 309-312. 
[n]	C. A. Ludemann et al., “Initial Operation of ORIC with Tandem Injection”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-02, pp. 59-62. 
[n]	S. Jamison et al., “Electron-bunch manipulation at 400GHz for compression, de-chirping, acceleration and synchronisation of femtosecond bunches.”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA072, unpublished. 
[n]	C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2684-2686. doi:10.18429/JACoW-IPAC2019-WEPGW085
[n]	E. S. McCrory, “The Commissioning and Initial Operation of the Fermilab 400 MeV Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO2-02, pp. 36-40. 
[n]	E. Ciapala, A. Hofmann, S. Myers, and T. Risselada, “The Variation of y, with Ap/p in the CERN ISR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3571-3574. 
[n]	R. A. Gough, “Use of a Small Off-Line Computer in the Operation of a Versatile Heavy Ion Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2934-2937. 
[n]	S. Heifets and A. Michailichenko, “On the Impedance Due to Synchrotron Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 458-461. 
[n]	Yu. Matveev and A. Kadnikov, “Experimental Investigation of High Voltage Nanosecond Generators of Injection System for SIBERIA-2 Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1348-1351. 
[n]	J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50. 
[n]	H. Miura et al., “Performance of a Fast Kicker Magnet for Rare-RI Ring”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA23, pp. 95-97. 
[n]	B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1553-1556. doi:10.18429/JACoW-IPAC2023-TUPA105
[n]	E. S. McCrory, L. Allen, K. L. Junck, M. Popovicacute, and C. Schmidt, “The Performance of the Beam Diagnostics Systems for the Fermilab 400 MeV Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-75, pp. 878-880. 
[n]	B. Bertrand and A. Harrisson, “Building and Packaging EPICS Modules With Conda”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 222. doi:10.18429/JACoW-ICALEPCS2019-MOPHA014
[n]	G. A. Filatov et al., “Beam Lines and Stations for Applied Research Based on Ion Beams Extracted from Nuclotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3096-3098. doi:10.18429/JACoW-IPAC2022-THPOMS054
[n]	H. Cortey, “The Laser MegaJoule Facility Status Report”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 989-993. doi:10.18429/JACoW-ICALEPCS2021-FRAL01
[n]	S. K. Neema et al., “MACE Camera Electronics: Control, Monitoring & Safety Mechanisms”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1011-1016. doi:10.18429/JACoW-ICALEPCS2021-FRAL05
[n]	H. Tsutsui et al., “Design Study of a Superconducting AVF Cyclotron for Proton Therapy”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO3PB02, pp. 102-104. 
[n]	C. Chianelli, A. Curtoni, A. Zeitoun-Fakiris, J. Jodet, and I. Regardin, “Microscopic Analysis of Niobium Field Electron Emitters”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F09, pp. XX-XX. 
[n]	I. G. Brown, J. E. Galvin, R. A. MacGill, and R. T. Wright, “Status of the MEVAA High Current Metal Ion Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 343-346. 
[n]	M. Bernard et al., “First Tests of the 250 keV Electron Source and Beamline for the TESLA Test Facility Injector”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP011L, pp. 1541-1543. 
[n]	S. Myers and E. Peschardt, “The Efficiency of Acceleration by Phase Displacement in the Presence of RF Noise”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3529-3532. 
[n]	C. Fischer, “Coping with Alignment Tolerances on CLIC Components in the 10 mum Range”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 683-686. 
[n]	M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391. 
[n]	J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783. 
[n]	M. W. Poole et al., “4GLS - a New Type of  Fourth Generation Light Source Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191. 
[n]	R. W. M??ller et al., “Heavy-Ion RFQ Accelerator MAXILAC Achieves 45 keV / AMU”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-31, pp. 328-329. 
[n]	J. Divitcos, M. De Jonge, D. Howard, and J. McKinlay, “Milliprobe Scanner Station”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 93-95. doi:10.18429/JACoW-MEDSI2016-MOPE38
[n]	M. Gordon, A. Bartnik, J. Maxson, K. Shen, M. Andorf, and M. Kaemingk, “Update on the MEDUSA ultrafast electron diffraction beamline at Cornell”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1999-2002. doi:10.18429/JACoW-IPAC2024-WEPC19
[n]	S. R. Douglass, T. F. Godlove, and E. Zaidman, “An Efficient Induction Modulator for the Relativistic Klystron Two Beam Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH023, pp. 3717-3719. 
[n]	L. Bottura et al., “First Field Test of FiDeL the Magnetic Field Description for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP046, pp. 241-243. 
[n]	T. Kato and S. Machida, “RF Tuning of the KEK 40 MeV Proton Linac with Post Couplers”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-32, pp. 119-121. 
[n]	C. Bovet and C. Fischer, “Precise Determination of the Amplitude Functions in Collider Insertions with an Application to LEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1301-1304. 
[n]	T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1328-1331. doi:10.18429/JACoW-IPAC2023-TUODB1
[n]	N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 167-170. 
[n]	M. C. Chalmers and Y. E. Tan, “Automatic Classification of Post Mortem Data for Reduced Beam Down Time”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3799-3801. doi:10.18429/JACoW-IPAC2019-THPRB003
[n]	D. Walsh, W. Okell, T. Pacey, and E. Snedden, “Demonstration of an electro-optic spectral interferometry longitudinal profile monitor at Clara”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4855-4858. doi:10.18429/JACoW-IPAC2023-THPL171
[n]	E. Levichev and V. Sajaev, “Nonlinear Beam Behaviour Study Using Lie Transforms”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 902-905. 
[n]	Y. E. Tan and R. B. Hogan, “Australian Synchrotron BPM Electronics Upgrade”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 297-299. doi:10.18429/JACoW-IBIC2018-TUPC01
[n]	J. E. Walter, “Large Rectangular Vacuum Windows”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 125-127. 
[n]	J. H. B. Madsen et al., “First Experience with the LEP Pre-Injector (LPI)  by the LPI  Beam Commissioning Team”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 298-301. 
[n]	R. Cee et al., “Investigation of TTF Injector Alignment with the Simulation Code V”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH105, pp. 3096-3098. 
[n]	W. Butcher, C. Welsch, H. Zhang, M. Patel, N. Kumar, and O. Stringer, “Experimental study into the invasiveness of a gas jet beam profile monitor for charged particle beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2229-2231. doi:10.18429/JACoW-IPAC2024-WEPG19
[n]	J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-04, pp. 225-227. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search