Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4062-4065. doi:10.18429/JACoW-IPAC2018-THPMF013
[n] A. Lorsabyan et al., “Yb DOPED HIGH-ENERGY UV ULTRAFAST LASER FOR AREAL FACILITY”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2412-2414. doi:10.18429/JACoW-IPAC2014-WEPME060
[n] C. De Martinis and D. Giove, “High Voltage Tests of a Prototype Electrostatic Deflector for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N03, pp. 575-578.
[n] S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
[n] V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4010-4012. doi:10.18429/JACoW-IPAC2014-THPRI100
[n] A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 99-101. doi:10.18429/JACoW-MEDSI2016-MOPE41
[n] L.-H. Yu, S. Krinsky, O. Singh, and F. J. Willeke, “The Performance of a Fast Closed Orbit Feedback System with Combined Fast and Slow Correctors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC140, pp. 3315-3317.
[n] X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n] C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n] P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
[n] M. Ferrater et al., “Experimental and Numerical Study of the ALBA LINAC Cooling System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 102-104. doi:10.18429/JACoW-MEDSI2016-MOPE42
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] G. Bassi, A. Blednykh, S. Krinsky, and J. Rose, “Analysis of Coupled Bunch Instabilities in the NSLS-II Storage Ring with a 7-cell PETRA-III RF Structure”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP043, pp. 1704-1706.
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] S. Krainara, S. Chatani, T. Kii, H. Ohgaki, and H. Zen, “Study of the Saturation of Radiation Energy Caused by the Space Charge Effect in a Compact THz Coherent Radiation Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4245-4248. doi:10.18429/JACoW-IPAC2018-THPMF074
[n] D. Zangrando et al., “Design of Two Variable Polarization Undulators for the ALBA Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC137, pp. 2329-2331.
[n] M. Belgroune et al., “Status of the ALBA Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] W. X. Cheng, B. Bacha, B. N. Kosciuk, S. Krinsky, and O. Singh, “Performance of NSLS2 Button BPM”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC09, pp. 678-681.
[n] J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 211-213. doi:10.18429/JACoW-MEDSI2018-WEPH06
[n] R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n] A. Nause, E. Dyunin, and A. Gover, “3D Simulations Proof Shot Noise Control and Reduction by Collective Coulomb Interaction”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC01, pp. 35-38.
[n] E. Acerbi, M. Sorbi, M. Castiglioni, N. Fi?®tier, and P. Mandrillon, “Design of the RF Cavity for a 200 MeV Proton Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-21, pp. 245-248.
[n] N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 371-373. doi:10.18429/JACoW-MEDSI2018-THPH16
[n] P. Cruikshank et al., “Mechanical Design Aspects of the LHC Beam Screen”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P003, pp. 3586-3588.
[n] T. Katayama, K. Ohtomo, and I. Tanabe, “Electron Cooling at ACR in Muses Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP09G, pp. 2258-2260.
[n] E. Acerbi et al., “The Protontherapy Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-05, pp. 614-617.
[n] G. Bisoffi et al., “Energy Comparison of Room Temperature and Superconducting Synchrotrons for Hadron Therapy”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3080-3083. doi:10.18429/JACoW-IPAC2022-THPOMS049
[n] C. Spezzani et al., “Free Electron Laser Study of Free Carbon Clusters”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH044, pp. 423-426.
[n] J. Campmany, L. G. O. Garcia-Orta, J. Marcos, Z. Mart?¡, V. Massana, and M. Quispe, “First Tests of the Apple II Undulator for the LOREA Insertion Device and Front End”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1488-1490. doi:10.18429/JACoW-IPAC2018-TUPMK002
[n] X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 187-190. doi:10.18429/JACoW-MEDSI2016-TUPE13
[n] A. S. Divatia, S. Chatterjee, N. K. Ganguly, and S. S. Ramamurthi, “VEC, Calcutta - Developments and Status”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J34, pp. 445-448.
[n] D. Zangrando et al., “Magnetic and Mechanical Characterization of Variable Polarization Undulator for the ALBA Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP078, pp. 2447-2449.
[n] H. H. Braun, S. Doebert, I. Syratcher, M. Taborelli, I. Wilson, and W. Wuensch, “CLIC High-Gradient Test Results”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO482, pp. 237-239.
[n] C. Ambasankaran et al., “Status of the 224-cm Variable Energy Cyclotron at Calcutta”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-11, pp. 84-87.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4062-4065.
- A. Lorsabyan et al., “Yb DOPED HIGH-ENERGY UV ULTRAFAST LASER FOR AREAL FACILITY”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2412-2414.
- C. De Martinis and D. Giove, “High Voltage Tests of a Prototype Electrostatic Deflector for the Milan Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N03, pp. 575-578.
- S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
- V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4010-4012.
- A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 99-101.
- L.-H. Yu, S. Krinsky, O. Singh, and F. J. Willeke, “The Performance of a Fast Closed Orbit Feedback System with Combined Fast and Slow Correctors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC140, pp. 3315-3317.
- X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 162-164.
- C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
- M. Ferrater et al., “Experimental and Numerical Study of the ALBA LINAC Cooling System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 102-104.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- G. Bassi, A. Blednykh, S. Krinsky, and J. Rose, “Analysis of Coupled Bunch Instabilities in the NSLS-II Storage Ring with a 7-cell PETRA-III RF Structure”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP043, pp. 1704-1706.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- S. Krainara, S. Chatani, T. Kii, H. Ohgaki, and H. Zen, “Study of the Saturation of Radiation Energy Caused by the Space Charge Effect in a Compact THz Coherent Radiation Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4245-4248.
- D. Zangrando et al., “Design of Two Variable Polarization Undulators for the ALBA Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC137, pp. 2329-2331.
- M. Belgroune et al., “Status of the ALBA Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- W. X. Cheng, B. Bacha, B. N. Kosciuk, S. Krinsky, and O. Singh, “Performance of NSLS2 Button BPM”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC09, pp. 678-681.
- J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 211-213.
- R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 230-232.
- A. Nause, E. Dyunin, and A. Gover, “3D Simulations Proof Shot Noise Control and Reduction by Collective Coulomb Interaction”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC01, pp. 35-38.
- E. Acerbi, M. Sorbi, M. Castiglioni, N. Fi?®tier, and P. Mandrillon, “Design of the RF Cavity for a 200 MeV Proton Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-21, pp. 245-248.
- N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 371-373.
- P. Cruikshank et al., “Mechanical Design Aspects of the LHC Beam Screen”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P003, pp. 3586-3588.
- T. Katayama, K. Ohtomo, and I. Tanabe, “Electron Cooling at ACR in Muses Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP09G, pp. 2258-2260.
- E. Acerbi et al., “The Protontherapy Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-05, pp. 614-617.
- G. Bisoffi et al., “Energy Comparison of Room Temperature and Superconducting Synchrotrons for Hadron Therapy”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3080-3083.
- C. Spezzani et al., “Free Electron Laser Study of Free Carbon Clusters”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH044, pp. 423-426.
- J. Campmany, L. G. O. Garcia-Orta, J. Marcos, Z. Mart?¡, V. Massana, and M. Quispe, “First Tests of the Apple II Undulator for the LOREA Insertion Device and Front End”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1488-1490.
- X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 187-190.
- A. S. Divatia, S. Chatterjee, N. K. Ganguly, and S. S. Ramamurthi, “VEC, Calcutta - Developments and Status”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J34, pp. 445-448.
- D. Zangrando et al., “Magnetic and Mechanical Characterization of Variable Polarization Undulator for the ALBA Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP078, pp. 2447-2449.
- H. H. Braun, S. Doebert, I. Syratcher, M. Taborelli, I. Wilson, and W. Wuensch, “CLIC High-Gradient Test Results”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO482, pp. 237-239.
- C. Ambasankaran et al., “Status of the 224-cm Variable Energy Cyclotron at Calcutta”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-11, pp. 84-87.
Back to search