Favourites
For Word
[n] G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
[n] F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1058-1061. doi:10.18429/JACoW-IPAC2019-MOPTS087
[n] J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3097-3099.
[n] P. Grand and A. N. Goland, “On the Needs and Status of CTR Materials Irradiation Facilities, an Introduction to 14-MeV Neutron Sources”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C05, pp. 132-137.
[n] F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
[n] M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
[n] C. Reece, “A 100 MV Cryomodule for CW Operation”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOA04, pp. 97-97.
[n] J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285.
[n] S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
[n] P. Craievich et al., “A Low-Energy RF Deflector for the FERMI@Elettra Project”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB43, pp. 493-496.
[n] F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 374-377. doi:10.18429/JACoW-ICALEPCS2015-MOPGF125
[n] J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
[n] K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
[n] S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
[n] D. Jeon, K. Crandall, J. Stovall, and H. Takeda, “Impact of Cavity RF Field Phase and Amplitude Control Uncertainties on the SNS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB059, pp. 2855-2856.
[n] T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
[n] R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503.
[n] F. Hoguin and S. Deghaye, “Solving the Synchronization Problem in Multi-Core Embedded Real-Time Systems”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 942-946. doi:10.18429/JACoW-ICALEPCS2015-WEPGF102
[n] J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
[n] J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3048-3050. doi:10.18429/JACoW-IPAC2016-WEPOY028
[n] E. Vogel et al., “SRF Gun Development at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 105-108. doi:10.18429/JACoW-LINAC2018-MOPO037
[n] S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140
[n] K. Balewski, R. Brinkmann, Y. Derbenev, K. Fl?Âttmann, Yu. Martirosyan, and P. Wesolowski, “Electron Cooling at PETRA using a Bunched Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B02, pp. 1277-1282.
[n] F. Filippi et al., “Gas-filled Capillaries for Plasma-Based Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1731-1733. doi:10.18429/JACoW-IPAC2017-TUPIK023
[n] R. Brinkmann, Y. Derbenev, and K. Fl?Âttmann, “A Low Emittance, Flat-Beam Electron Source for Linear Colliders”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B06, pp. 453-455.
[n] R. Fabris and P. Tosolini, “The Injection and Extraction Kicker Circuits for the Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD006, pp. 1443-1445.
[n] S. Posen, M. Liepe, and Y. Xie, “Cornell SRF New Materials Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC108, pp. 328-330.
[n] M. J. Barnes et al., “Studies of Impedance-related Improvements of the SPS Injection Kicker System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3611-3614. doi:10.18429/JACoW-IPAC2016-THPMW030
[n] V. Ayvazyan, K. Balewski, R. Brinkmann, Y. Derbenev, Yu. Martirosyan, and P. Wesolowski, “Conceptual Design of Recirculator Ring for Electron Cooling at PETRA-p”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B01, pp. 1256-1258.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
- F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1058-1061.
- J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3097-3099.
- P. Grand and A. N. Goland, “On the Needs and Status of CTR Materials Irradiation Facilities, an Introduction to 14-MeV Neutron Sources”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C05, pp. 132-137.
- F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
- M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
- C. Reece, “A 100 MV Cryomodule for CW Operation”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOA04, pp. 97-97.
- J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285.
- S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
- P. Craievich et al., “A Low-Energy RF Deflector for the FERMI@Elettra Project”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB43, pp. 493-496.
- F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 374-377.
- J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 274-277.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
- K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
- S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
- D. Jeon, K. Crandall, J. Stovall, and H. Takeda, “Impact of Cavity RF Field Phase and Amplitude Control Uncertainties on the SNS Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB059, pp. 2855-2856.
- T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
- R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 500-503.
- F. Hoguin and S. Deghaye, “Solving the Synchronization Problem in Multi-Core Embedded Real-Time Systems”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 942-946.
- J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
- J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3048-3050.
- E. Vogel et al., “SRF Gun Development at DESY”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 105-108.
- S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 413-416.
- K. Balewski, R. Brinkmann, Y. Derbenev, K. Fl?Âttmann, Yu. Martirosyan, and P. Wesolowski, “Electron Cooling at PETRA using a Bunched Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B02, pp. 1277-1282.
- F. Filippi et al., “Gas-filled Capillaries for Plasma-Based Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1731-1733.
- R. Brinkmann, Y. Derbenev, and K. Fl?Âttmann, “A Low Emittance, Flat-Beam Electron Source for Linear Colliders”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B06, pp. 453-455.
- R. Fabris and P. Tosolini, “The Injection and Extraction Kicker Circuits for the Elettra Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD006, pp. 1443-1445.
- S. Posen, M. Liepe, and Y. Xie, “Cornell SRF New Materials Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC108, pp. 328-330.
- M. J. Barnes et al., “Studies of Impedance-related Improvements of the SPS Injection Kicker System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3611-3614.
- V. Ayvazyan, K. Balewski, R. Brinkmann, Y. Derbenev, Yu. Martirosyan, and P. Wesolowski, “Conceptual Design of Recirculator Ring for Electron Cooling at PETRA-p”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B01, pp. 1256-1258.
Back to search