Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Kwiatkowski, P. Czuma, K. Namyslak, G. Strzelecki, A. Andrejczuk, and K. Szymanski, “Design and Development of Inverse Compton Scattering Hard X-Ray Source Based on Linear Accelerator of Polish Free Electron Laser (PolFEL)”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM115, unpublished.
[n] M. P. Hechler, R. I. Cutler, J. J. Error, and W. J. McGahern, “The Installation Status of the SNS Accumulator Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT069, pp. 3789-3791.
[n] A. Macpherson et al., “CERN's Bulk Niobium High Gradient SRF Programme: Developments and Recent Cold Test Results”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB074, pp. 291-295.
[n] J. M. Grames et al., “Ion Back-Bombardment of GaAs Photocathodes Inside DC High Voltage Electron Guns”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP045, pp. 2875-2877.
[n] N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3656-3659. doi:10.18429/JACoW-IPAC2018-THPAL016
[n] K. A. Brown et al., “First Beam Tests of the Muon Collider Target Test Beam Line at the AGS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH129, pp. 1511-1513.
[n] B. Balhan et al., “Modification of the LEP Electrostatic Separator Systems for Operation with Bunch Trains”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA15, pp. 557-559.
[n] K. Euler, P. D. Eversheim, F. Hinterberger, P. von Rossen, and B. Sch??ller, “Beam Stabilization and Automatic Energy Variation at the Bonn Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-12, pp. 2351-2354.
[n] C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
[n] P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2476-2479.
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3055-3058.
[n] S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
[n] C. S. Simon et al., “Production Process for the European XFEL Re-Entrant Cavity BPM”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF05, pp. 307-310.
[n] N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
[n] C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 67-70. doi:10.18429/JACoW-ECRIS2018-TUB3
[n] M. Hierholzer, M. Killenberg, T. Kozak, N. Shehzad, G. Varghese, and M. Viti, “Software Tests and Simulations for Control Applications Based on Virtual Time”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 10-12. doi:10.18429/JACoW-PCAPAC2016-WECSPLCO03
[n] A. D. Yeremian, V. K. Bharadwaj, P. Emma, R. H. Miller, D. T. Palmer, and M. D. Woodley, “A Proposed Injector for the LCLS Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W014, pp. 2855-2857.
[n] R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
[n] R. Akre, T. Straumann, and K. D. Kotturi, “130-MHz, 16-Bit Four-Channel Digitizer”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB39, pp. 475-477.
[n] P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404.
[n] D. Chernin, “Self-Consistent Treatment of Equilibrium Space Charge Effects in the l=2 Stellatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2504-2507.
[n] Y.-M. Wang, S.-I. Kwon, A. H. Regan, and T. S. Rohlev, “System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH301, pp. 1613-1615.
[n] Y. Chung, “Theoretical Studies on the Beam Position Measurement with Button-Type Pickups in APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1121-1124.
[n] S. Rastigeev et al., “Operation and Development of the BINP AMS Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA05, pp. 134-136.
[n] O. Gr, “Beam Induced Multipacting”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
[n] W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2793-2796.
[n] W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
[n] H. Bach et al., “The ANKA Injector”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18F, pp. 632-634.
[n] J. Tapia et al., “LAMP: the LANSCE modernization project”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUAD1, unpublished.
[n] G. Brautti et al., “BRIC: an Electron Beam Ion Source as Charge State Breeder for Radioactive Ion Beam Facilities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B01, pp. 1619-1621.
[n] A. Gamelin et al., “Collective Effects Studies for the SOLEIL Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 274-277. doi:10.18429/JACoW-IPAC2021-MOPAB068
[n] P. Bastl et al., “Control System Software Development Environment in ELI Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1831-1833. doi:10.18429/JACoW-ICALEPCS2017-THPHA171
[n] J. J. Song, R. L. Kustom, and J. H. Zhou, “Aperture Coupling Measurement in a Test Chamber for the Advancecd Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 922-925.
[n] W. C. Cheng, N. Y. Huang, and W. K. Lau, “Resonant Transition Radiation Induced by an Ultrashort Electron Bunch from Aluminium Foil Stack”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA074, pp. 244-246.
[n] D. W. Sprehn, G. Caryotakis, A. A. Haase, E. N. Jongewaard, and C. Pearson, “Current Status of the Next Linear Collider X-band Klystron Development Program”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF063, pp. 1090-1092.
[n] S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
[n] S. D. Ecklund, “The Status of SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1592-1596.
[n] F. Krienen, “Charged Particle Storage Device”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP79, pp. 3134-3136.
[n] E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
[n] L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1439-1443. doi:10.18429/JACoW-ICALEPCS2023-THPDP056
[n] R. Stassen, P. B. Brittner, G. Schug, and H. S. Singer, “Pickup Structures for the HESR Stochastic Cooling System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH085, pp. 228-230.
[n] W. W. MacKay et al., “Estimation of Collective Instabilities in RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC24, pp. 3131-3133.
[n] M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
[n] S. Kumar et al., “Numerical Simulation on Plasma-Based Beam Dumps Using Smilei”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 582-585. doi:10.18429/JACoW-IPAC2021-MOPAB171
[n] Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
[n] J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2832-2835.
[n] L. Zhao, B. Cluggish, J. S. Kim, R. C. Pardo, and R. C. Vondrasek, “Validation and Application of GEM (General ECRIS Modeling)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP054, pp. 3327-3329.
[n] Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
[n] H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished.
[n] W.-D. Klotz et al., “ITER Controls Design Status”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOB001, pp. XX-XX.
[n] L. G. Ratner, “Polarization Preservation in the AGS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2690-2693.
[n] N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n] E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218.
[n] T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
[n] U. Becker, M. Dohlus, K. Ko, B. Krietenstein, and T. Weiland, “Simulation of Oscillations in High Power Kystrons”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP066G, pp. 1274-1276.
[n] A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n] R. Akre et al., “LCLS LLRF Upgrades to the SLAC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS036, pp. 2421-2423.
[n] K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
[n] Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452.
[n] D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
[n] R. T. Dowd, A. Michalczyk, and K. Zingre, “Cavity Load Impedance Diagnostic at the Australian Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP064, pp. 2153-2155.
[n] T. O. Raubenheimer et al., “A Damping Ring Design for the SLAC Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC02, pp. 701-703.
[n] J. Li et al., “Tunable laser pulses enable the generation of femtosecond electron beams with controllable lengths”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1409-1412. doi:10.18429/JACoW-IPAC2024-TUPG69
[n] S. J. Black and G. Spalek, “Calculation of Mechanical Vibration Frequencies of Stiffened Superconducting Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-40, pp. 719-721.
[n] B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
[n] K. Foraz, E. Barbero-Soto, H. Gaillard, C. Hauviller, and S. Weisz, “Schedule evolution during the life-time of the LHC project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN092, pp. 1592-1594.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Kwiatkowski, P. Czuma, K. Namyslak, G. Strzelecki, A. Andrejczuk, and K. Szymanski, “Design and Development of Inverse Compton Scattering Hard X-Ray Source Based on Linear Accelerator of Polish Free Electron Laser (PolFEL)”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM115, unpublished.
- M. P. Hechler, R. I. Cutler, J. J. Error, and W. J. McGahern, “The Installation Status of the SNS Accumulator Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT069, pp. 3789-3791.
- A. Macpherson et al., “CERN's Bulk Niobium High Gradient SRF Programme: Developments and Recent Cold Test Results”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB074, pp. 291-295.
- J. M. Grames et al., “Ion Back-Bombardment of GaAs Photocathodes Inside DC High Voltage Electron Guns”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP045, pp. 2875-2877.
- N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3656-3659.
- K. A. Brown et al., “First Beam Tests of the Muon Collider Target Test Beam Line at the AGS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH129, pp. 1511-1513.
- B. Balhan et al., “Modification of the LEP Electrostatic Separator Systems for Operation with Bunch Trains”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA15, pp. 557-559.
- K. Euler, P. D. Eversheim, F. Hinterberger, P. von Rossen, and B. Sch??ller, “Beam Stabilization and Automatic Energy Variation at the Bonn Isochronous Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-12, pp. 2351-2354.
- C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
- P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2476-2479.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3055-3058.
- S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
- C. S. Simon et al., “Production Process for the European XFEL Re-Entrant Cavity BPM”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF05, pp. 307-310.
- N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
- C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 67-70.
- M. Hierholzer, M. Killenberg, T. Kozak, N. Shehzad, G. Varghese, and M. Viti, “Software Tests and Simulations for Control Applications Based on Virtual Time”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 10-12.
- A. D. Yeremian, V. K. Bharadwaj, P. Emma, R. H. Miller, D. T. Palmer, and M. D. Woodley, “A Proposed Injector for the LCLS Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W014, pp. 2855-2857.
- R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
- R. Akre, T. Straumann, and K. D. Kotturi, “130-MHz, 16-Bit Four-Channel Digitizer”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB39, pp. 475-477.
- P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1401-1404.
- D. Chernin, “Self-Consistent Treatment of Equilibrium Space Charge Effects in the l=2 Stellatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2504-2507.
- Y.-M. Wang, S.-I. Kwon, A. H. Regan, and T. S. Rohlev, “System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH301, pp. 1613-1615.
- Y. Chung, “Theoretical Studies on the Beam Position Measurement with Button-Type Pickups in APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1121-1124.
- S. Rastigeev et al., “Operation and Development of the BINP AMS Facility”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA05, pp. 134-136.
- O. Gr, “Beam Induced Multipacting”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
- W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2793-2796.
- W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
- H. Bach et al., “The ANKA Injector”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18F, pp. 632-634.
- J. Tapia et al., “LAMP: the LANSCE modernization project”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUAD1, unpublished.
- G. Brautti et al., “BRIC: an Electron Beam Ion Source as Charge State Breeder for Radioactive Ion Beam Facilities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B01, pp. 1619-1621.
- A. Gamelin et al., “Collective Effects Studies for the SOLEIL Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 274-277.
- P. Bastl et al., “Control System Software Development Environment in ELI Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1831-1833.
- J. J. Song, R. L. Kustom, and J. H. Zhou, “Aperture Coupling Measurement in a Test Chamber for the Advancecd Photon Source (APS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 922-925.
- W. C. Cheng, N. Y. Huang, and W. K. Lau, “Resonant Transition Radiation Induced by an Ultrashort Electron Bunch from Aluminium Foil Stack”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA074, pp. 244-246.
- D. W. Sprehn, G. Caryotakis, A. A. Haase, E. N. Jongewaard, and C. Pearson, “Current Status of the Next Linear Collider X-band Klystron Development Program”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF063, pp. 1090-1092.
- S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
- S. D. Ecklund, “The Status of SLC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1592-1596.
- F. Krienen, “Charged Particle Storage Device”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP79, pp. 3134-3136.
- E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
- L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP056, pp. 1439-1443.
- R. Stassen, P. B. Brittner, G. Schug, and H. S. Singer, “Pickup Structures for the HESR Stochastic Cooling System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH085, pp. 228-230.
- W. W. MacKay et al., “Estimation of Collective Instabilities in RHIC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC24, pp. 3131-3133.
- M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
- S. Kumar et al., “Numerical Simulation on Plasma-Based Beam Dumps Using Smilei”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 582-585.
- Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
- J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2832-2835.
- L. Zhao, B. Cluggish, J. S. Kim, R. C. Pardo, and R. C. Vondrasek, “Validation and Application of GEM (General ECRIS Modeling)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP054, pp. 3327-3329.
- Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
- H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished.
- W.-D. Klotz et al., “ITER Controls Design Status”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOB001, pp. XX-XX.
- L. G. Ratner, “Polarization Preservation in the AGS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2690-2693.
- N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2239-2242.
- E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1215-1218.
- T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
- U. Becker, M. Dohlus, K. Ko, B. Krietenstein, and T. Weiland, “Simulation of Oscillations in High Power Kystrons”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP066G, pp. 1274-1276.
- A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2540-2543.
- R. Akre et al., “LCLS LLRF Upgrades to the SLAC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS036, pp. 2421-2423.
- K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
- Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452.
- D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
- R. T. Dowd, A. Michalczyk, and K. Zingre, “Cavity Load Impedance Diagnostic at the Australian Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP064, pp. 2153-2155.
- T. O. Raubenheimer et al., “A Damping Ring Design for the SLAC Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC02, pp. 701-703.
- J. Li et al., “Tunable laser pulses enable the generation of femtosecond electron beams with controllable lengths”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG69, pp. 1409-1412.
- S. J. Black and G. Spalek, “Calculation of Mechanical Vibration Frequencies of Stiffened Superconducting Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-40, pp. 719-721.
- B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
- K. Foraz, E. Barbero-Soto, H. Gaillard, C. Hauviller, and S. Weisz, “Schedule evolution during the life-time of the LHC project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN092, pp. 1592-1594.
Back to search