Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
[n] M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3360-3362. doi:10.18429/JACoW-IPAC2016-THPMB050
[n] A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
[n] D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
[n] T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 220-222. doi:10.18429/JACoW-SRF2017-MOPB070
[n] P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
[n] Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
[n] G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
[n] E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
[n] T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
[n] J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
[n] M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
[n] G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2040-2043.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-03, pp. 149-151.
[n] W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
[n] G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1065-1066. doi:10.18429/JACoW-IPAC2016-TUOBB01
[n] S. Henderson, “SNS Progress, Challenges and Upgrade Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THXG01, pp. 2892-2896.
[n] M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
- M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3360-3362.
- A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
- D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
- T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 220-222.
- P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
- Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
- G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
- E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
- T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
- J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
- M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
- G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2040-2043.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-03, pp. 149-151.
- W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
- G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1065-1066.
- S. Henderson, “SNS Progress, Challenges and Upgrade Options”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THXG01, pp. 2892-2896.
- M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
Back to search