Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] R. Valizadeh, O. Malyshev, C. Benjamin, and J. Conlon, “Deposition of NbTiN and NbN on 6 GHz seamless copper cavity”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL145, unpublished.
[n] S. P. Kearney et al., “Design of Apparatus for a High-Power-Density Diamond Irradiation Endurance Experiment for XFELO Applications”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 185-187. doi:10.18429/JACoW-FEL2017-MOP056
[n] S. Balachandran et al., “Microstructure Development in a Cold Worked SRF Niobium Sheet After Heat Treatments”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 191-196. doi:10.18429/JACoW-SRF2023-MOPMB041
[n] J. Bundesmann, A. Denker, J. Heufelder, G. Kourkafas, P. Mühldorfer, and A. Weber, “Fast Beam Delivery for Flash Irradiations at the HZB Cyclotron”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 178-182. doi:10.18429/JACoW-ICALEPCS2023-MO3BCO07
[n] B. Higuera Gonzalez, T. Overton, T. Pacey, Y. Saveliev, and G. Xia, “Simulations study of transverse wakefields in a dielectric wakefield acceleration scheme”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1556-1559. doi:10.18429/JACoW-IPAC2025-TUPS055
[n] N. Pogue et al., “Diagnostic Suite for High Power Electron Beams”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL130, unpublished.
[n] S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362.
[n] A. Latina, A. Malyzhenkov, A. Aksoy, and J. Olivares Herrador, “Update of the RF-Track particle tracking code”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3462-3465. doi:10.18429/JACoW-IPAC2023-WEPL151
[n] B.-T. Sian et al., “Split 6GHz SRF thin film cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3074-3077. doi:10.18429/JACoW-IPAC2023-WEPA185
[n] H. Yang and D. C. Shin, “Beam Loss Monitor for Undulators in PAL-XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 511-514. doi:10.18429/JACoW-FEL2017-WEP044
[n] J. Dusatko, A. Fisher, E. Chin, E. Rodriguez, G. Brown, and W. Cobau, “The LCLS-II beam loss monitor readout system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3362-3365. doi:10.18429/JACoW-IPAC2024-THPG44
[n] M. Petrichenkov et al., “Status of the Russian Accelerator Mass Spectrometer Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH195, pp. 2391-2393.
[n] J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2236-2239.
[n] R. S. Lord et al., “Energy Boosting of a Tandem Beam with the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1679-1682.
[n] A. Rodr?¡guez P?íramo et al., “Design of the ESS MEBT Faraday Cup”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 106-110. doi:10.18429/JACoW-IBIC2019-MOPP014
[n] P. J. Tallerico and M. T. Lynch, “The Los Alamos Free-Electron Laser (FEL) RF System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2865-2868.
[n] M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664.
[n] P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
[n] O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 192-194. doi:10.18429/JACoW-CYCLOTRONS2019-TUP017
[n] A. X. Wang et al., “STRUCTURAL OPTIMIZATION DESIGN OF FARADAY CUP FOR BEAM COMMISSIONING OF CSNS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 943-945. doi:10.18429/JACoW-IPAC2021-MOPAB299
[n] T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1353-1356. doi:10.18429/JACoW-IPAC2025-TUPM086
[n] L. A. Sarkisyan and A. L. Sarkisyan, “Increase of Beam Intensity”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXA-10, pp. 409-410.
[n] J. Bundesmann, A. Denker, A. Dittwald, T. Fanselow, and G. Kourkafas, “Upgrading the Beam Diagnostic of the HZB-Cyclotron from an Analogue to a new Digital Platform”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO011, pp. 228-230. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO011
[n] P. C. Burkimsher, “JCOP Experience with a Commercial SCADA Product, PVSS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU201, pp. XX-XX.
[n] D. Angal-Kalinin, A. R. Bainbridge, J. K. Jones, T. H. Pacey, Y. M. Saveliev, and E. W. Snedden, “The Design of the Full Energy Beam Exploitation (FEBE) Beamline on CLARA”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 585-588. doi:10.18429/JACoW-LINAC2022-TUPORI18
For LaTeX
Use Complete Form
For BibTeX
References
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- R. Valizadeh, O. Malyshev, C. Benjamin, and J. Conlon, “Deposition of NbTiN and NbN on 6 GHz seamless copper cavity”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL145, unpublished.
- S. P. Kearney et al., “Design of Apparatus for a High-Power-Density Diamond Irradiation Endurance Experiment for XFELO Applications”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 185-187.
- S. Balachandran et al., “Microstructure Development in a Cold Worked SRF Niobium Sheet After Heat Treatments”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB041, pp. 191-196.
- J. Bundesmann, A. Denker, J. Heufelder, G. Kourkafas, P. Mühldorfer, and A. Weber, “Fast Beam Delivery for Flash Irradiations at the HZB Cyclotron”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3BCO07, pp. 178-182.
- B. Higuera Gonzalez, T. Overton, T. Pacey, Y. Saveliev, and G. Xia, “Simulations study of transverse wakefields in a dielectric wakefield acceleration scheme”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS055, pp. 1556-1559.
- N. Pogue et al., “Diagnostic Suite for High Power Electron Beams”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL130, unpublished.
- S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362.
- A. Latina, A. Malyzhenkov, A. Aksoy, and J. Olivares Herrador, “Update of the RF-Track particle tracking code”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL151, pp. 3462-3465.
- B.-T. Sian et al., “Split 6GHz SRF thin film cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA185, pp. 3074-3077.
- H. Yang and D. C. Shin, “Beam Loss Monitor for Undulators in PAL-XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 511-514.
- J. Dusatko, A. Fisher, E. Chin, E. Rodriguez, G. Brown, and W. Cobau, “The LCLS-II beam loss monitor readout system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG44, pp. 3362-3365.
- M. Petrichenkov et al., “Status of the Russian Accelerator Mass Spectrometer Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH195, pp. 2391-2393.
- J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2236-2239.
- R. S. Lord et al., “Energy Boosting of a Tandem Beam with the Oak Ridge Isochronous Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1679-1682.
- A. Rodr?¡guez P?íramo et al., “Design of the ESS MEBT Faraday Cup”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 106-110.
- P. J. Tallerico and M. T. Lynch, “The Los Alamos Free-Electron Laser (FEL) RF System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2865-2868.
- M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664.
- P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
- O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 192-194.
- A. X. Wang et al., “STRUCTURAL OPTIMIZATION DESIGN OF FARADAY CUP FOR BEAM COMMISSIONING OF CSNS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 943-945.
- T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM086, pp. 1353-1356.
- L. A. Sarkisyan and A. L. Sarkisyan, “Increase of Beam Intensity”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXA-10, pp. 409-410.
- J. Bundesmann, A. Denker, A. Dittwald, T. Fanselow, and G. Kourkafas, “Upgrading the Beam Diagnostic of the HZB-Cyclotron from an Analogue to a new Digital Platform”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO011, pp. 228-230.
- P. C. Burkimsher, “JCOP Experience with a Commercial SCADA Product, PVSS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU201, pp. XX-XX.
- D. Angal-Kalinin, A. R. Bainbridge, J. K. Jones, T. H. Pacey, Y. M. Saveliev, and E. W. Snedden, “The Design of the Full Energy Beam Exploitation (FEBE) Beamline on CLARA”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 585-588.
Back to search